Technical parameters:(COLO-110P)
1, Dimensions: Φ900 * 1850 (mm)
2, weight: 108KG
3, the total volume: 1m3
4, air pressure: 0.6-0.8Mpa
The blasting machine structure:
1, the chassis is made of 6mm cold rolled steel plate, the surface spray.
2, sandblasting machine with a gun, spray gun with 8mm large boron carbide nozzle.
3, the machine is equipped with 5 m sand tube.
4, the body can be adjusted by the handle below the amount of sand.
5, the machine requires more than 1.5 cubic meters (11 kilowatts or more) of the air compressor.
6, the machine can handle 15-20 square meters per hour.
Note: give  a set of protective clothing free

Features:
1, wheel structure, easy to move;
2, less investment, less wearing parts;
3, the effect of processing the workpiece, and high efficiency;
4, blasting from the workpiece size control, a variety of large parts are applicable.
In this case,
A variety of models for your  choose, control manual, pneumatic or electronic control,  single-warehouse, double warehouse, single spray gun or multi- spray gun, which is suitable for long-term continuous work places, such as profiles or steel structure pre-treatment, pipes, tank rust, container refurbishment.

Portable sand blast machinery are mainly used to clean bigger components on-site, like steel structure, bridge, big tank body, used for big tanks vessel repaire, pipe rust removing at oil field, container renew, etc, and generally used in open, or used in very big blast rooms.