China Cold Copper Screw Nail Wire Drawing Machines Oto 

My contact way
My mobile: 86-15251635399
Contactor: Echo Shi

Our Factory

Wuxi Shenda Nail Machinery Factory is a expenrienced factory, specializing in exporting various machines and equipments since 1995. 

Our main products include Nail Making Machine Production Line, Wire Drawing Machine Production Line, High-speed Screw Rolling Machine and High-speed Coil Nail Machine. 

Time proves we are a professional factory with stable quality and competitive price.
We provide one-stop service from design to installation.
 

Whole Nail making process:

1.Drawing steel wire: use wire drawing machine to change needed wire diameter.(If nail diameter is 3mm, wire diameter will be drawn to 3mm)
2.Making nail: Enter the finished steel wire into nail making machine.It can produce not-so-bright nail.
3.Polishing:Put the semi-finished nails into the poblishng machine with some saw dust,paraffins and gas. After clashing and crashing,the nails become bright.
4.Packing:Use wooden case to pack the nails.

 

Automatic Nail Wire Drawing Machine

Application

The set of the machines is an ideal equipment for drawing wire stock of high,medium and carbon steel,as well as coper,alumium and alloy.The machine are applied for drawing wire in the factories, such as wire-steel factor,metal mesh factory and nail making factory etc.

In order to lower residual heat on the surface of the block, the cooling means is installed in inter-wall of the block,the wortle is soaked in cooling water to reduce its working temperature.

The machine runs with carvel or linkage. The safety halt gear is installed by the position of operating block.

Framework

Wire drawing machine consists of main reduction box, die box,wheel frame, wire brace and

electrical control system.The spinning drawing blocks are driven by JZT series motor,with gear coupling runs changeful gears to reduce speed. The drawing blocks are verticaly fixed in sealed box body.The gear pair are lubricated with oil.
 

Wire drawing Machine Production Line 

First, Descaling Machine removes rust and surface oxide from raw material steel wire.

Second, Pointing machine is to make the point of the raw wire thinner, then it can enter through the wire drawing dies to draw.

Third, wire drawing machine is to draw the raw wire to the fine dia you need. we also make all kinds of pulley wire drawing machine.           

You can choose the model based on following specifications of wire drawing machines:

Finally, Discharging Machine: To discharge finished steel wire from wire drawing machine.
Trunk Type Winding Machine: To discharge more heavier finished steel wire from wire drawing machine.  
Butt Welding Machine: To welding split wire together

Details of auxiliary equipments

Our service:
Your concern is our concern!Your win is our win! We expect double-win!