Characteristics:
(1)The machine combines auto washing bottle, filling water, placing cap, pressing cap and products outputting as one unit
(2)The PLC(Programmable Logical Controller) controlling systems, which with Panasonic brand and the Air TAC brand pneumatic elements making the machine working more functionally
(3)The international famous brand electric appliances such as LG, OMRON, making the machine working more safely
(4)The main body of the machine made of stainless steel which is sanitary galss and healthy, with impact construction
(5)The rotary spraying washing system can wash bottles more perectly
(6)Inchmeal filling syetem, adjustable filling time, no water spatter when flushing the bottle
Filling:
The cleaned bottles would be turned over with the running of chain, then falls into the a bottle carrying chair, another chair pushing cylinder pushes the chair go ahead with the cleaned bottle to under the filling heads the filling time and the filling vulume can be adjusted by on the operation panel
Fixing and pressing cap:
After the filling steps, the fullfilled bottles will be pushed by the following bottles to the cap trough, all the caps would be supplied by the cap ordering monitor after being laid the caps, the following bottles pushing these tow bottles to the cap pressing cylinder the cap will be pressed firmly by the cylinder Afther all of these step the products will go to the conveyor then to the packing parts
Production line:
The full production line include cap remover, outer and inner automatic bottle washer, upload system, Washing, filling and capping machine, lamp checking, heat shrinking machine, bottle lift machine
Inner and outer washing:
1. This machine is two rows 4 washing sections
2.1st is washing internal bottles with alkali water
3.2ND is washing internal bottles with recycled clear water
4.3rd is washing internal bottles with hot detergent water
5.4th is washing internal bottles with pure water
Model | QGF-150 | QGF-250 | QGF-450 | QGF-600 | QGF-900 | QGF-1200 |
Filling Heads | 1 | 2 | 3 | 4 | 6 | 8 |
Volume(L) | 18.9 |
Barrel Size(mm) | φ 270× 490 |
capacity(b/h) | 120-150 | 240-300 | 400-450 | 500-600 | 700-800 | 1000-1200 |
Gas Pressure(Mpa) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.6 | 0.6 | 0.6 |
Gas Consumption(m 3 /min) | 0.37 | 0.6 | 0.8 | 1 | 1.2 | 1.5 |
Moto Power(kw) | 1.38 | 1.75 | 3.8 | 7.5 | 9 | 13.5 |
Rated Voltage(V) | 380V/50Hz |
Weight(kg) | 680 | 1200 | 1600 | 2000 | 3500 | 4500 |
Service Term
1. Installation
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
2. Translator
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.
Commercial Terms
1. Warranty
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
2. Payment
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight