Products

114mm Pipe Hydrostatic Tester for ERW Pipe Mill

China 114mm Pipe Hydrostatic Tester for ERW Pipe Mill, Find details about China Pipe Hydrostatic Tester, Hydrostatic from 114mm Pipe Hydrostatic Tester for ERW Pipe Mill

Length
6-12m
Capacity
65kw
Trademark
HUAYE
Transport Package
Nude
Origin
China
Length
6-12m
Capacity
65kw
Trademark
HUAYE
Transport Package
Nude
Origin
China
Introduction
This 114Φ mm Pipe Hydrostatic Tester is mainly used for hydraulic test of steel pipes with outer diameter Φ19-Φ114mm.

Mechanical structure: This equipment is composed of two experimental heads and three drawing beams, two sets of stepping feeding devices. The main steel structure is welded by Q235 steel plate, and the welding conforms to the general technical conditions of JBZQ400.3-1986 welding parts, JB /T 5943-1991 Technical conditions for welding of construction machinery.
114mm Pipe Hydrostatic Tester for ERW Pipe Mill
114mm Pipe Hydrostatic Tester for ERW Pipe Mill
Hydraulic station: pressure 25Mpa.
The hydraulic station consists of fuel tank, motor, oil pump, multi-way valve and hydraulic accessories.
The system should be subjected to a pressure test. System oil pump, pipeline. When testing, firstly increase the pressure to the specified value of the table, maintain the pressure for 10min, then reduce to the nominal pressure, check the weld, interface and seal, etc., no leakage
114mm Pipe Hydrostatic Tester for ERW Pipe Mill
114mm Pipe Hydrostatic Tester for ERW Pipe Mill114mm Pipe Hydrostatic Tester for ERW Pipe Mill

You Might Also Like