Products

CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill

China CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill, Find details about China Pellet Mill Die, Die from CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill

Pressure Chamber Structure
Vertical
Tolerance Grade
4
Casting Surface Quality Level
1
Certification
CE, ISO 9001:2000
Inner Diameter
4-10mm
Range
Feed Machinery, Bimasss Machinery
Pattern
Honey-Comb, Teeth
Customized
for Cpm, Buhler, Andiritz, Muyang, Zhengchang Pel
Trademark
Liangyou
Transport Package
Iron Case
Specification
CE, ISO, SGS
Origin
Jiangsu China
HS Code
8436990000
Pressure Chamber Structure
Vertical
Tolerance Grade
4
Casting Surface Quality Level
1
Certification
CE, ISO 9001:2000
Inner Diameter
4-10mm
Range
Feed Machinery, Bimasss Machinery
Pattern
Honey-Comb, Teeth
Customized
for Cpm, Buhler, Andiritz, Muyang, Zhengchang Pel
Trademark
Liangyou
Transport Package
Iron Case
Specification
CE, ISO, SGS
Origin
Jiangsu China
HS Code
8436990000
Ce Approved Ring Die for Sale granulator dies matrix
 
---Ring die for Pellet Mill/Pellet Press/Pelletizer 
  
---Ring die for wood pellet machine,bio-mass pellet machine
 
Other spare parts for pellet mill
 
Good tensile strength, Good abrasion resistance, Good corrosion resistance, Good impact resistance, Good heat resistance, Good fatigue resistance.
Application:
Ring die for pellet machine in poultry feed,livestock feed,aqua feed, bio-mass pellet machine,etc.
We could offer you OEM high chrome steel ring die,Such as for CPM, Buhler, Andiritz, Muyang, Zhengchang pellet mill with different specification.  
 
Typefor feed pellet mill, bio-mass pellet mill
Patternhoney-comb, teeth,etc
widely application CPM, Buhler, Andiritz, Muyang, Zhengchang pellet mill,etc
CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill
CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill


CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill
CE Approved Ring Die for Sale Granulator Dies Matrix for Pellet Mill

Feature of our ring die:
1Made of imported high-carbon high-chromium stainless billet steel,optimization carbon,thus enhancing wearing and corrosion resistance and 
hardness.
2 It can deal with all kinds of die hole over &1.2mm (&1.2mm included) and compression ratio.
3Ring die can be produced up to 300mm-1500mm in diameter  and 500mm in height.
4In ring die processing, full automatic control, one-time molding for die hole, high smoothness.
 strong tensile strength,good wear resistance, good corrosion resistance,high wear resistance,long life.
 
Advantage of our ring die:
1.Material refining technology,fewer impurities,high purity,largely reducing harmful elements content(such as 
elements S,P ), thus comprehensive mechanical performance of material is raised.
2.Through roll forging, material is processed and strengthened and material fibre is complete and uniform, 
which increases integrated mechanical performance of material.
3.FDSP Company has the world advanced forging equipment and technology,electronic data processing 
systems and perfect quality control system.
4.Ring die blank,generally chromiumalloy roll forgings, some factories use 45 ordinary carbon steel.
5.Hardness of blank must be controlled, ranging from HB170 to HB220.If the hardness is too high,the drill is 
easy to break and happens with die hole when drilling. If hardness is too low, the surface finish of die hole will be not good.
6.In order to control blank inner material uniformity, every blank must be carried out with fault detection, 
which can avoid defects such as flaw, pore-free,crackle and inclusions etc.
7.After machining and heat treatment process, hardness of ring die can be up to HRC 52-58(inner diameter less than 350mm),HRC50-56(inner diameter more than 350mm),more wearable and 
anti-corrosion.
8.In order to control hardness uniformity of ring die after heat treatment, we choose more than three points 
in each part of trisection of peripheral direction to test hardness and take average.The difference of 
hardness value between each part should not be higher than HRC4.
9.According to the principle of metal material science combined with gas quenching and C,Cr,Mn,Ni,V elements content is optimized, forming the standard of ring die.
 
Relation between die hole structure and pelleting:
Straight hole and release stepped hole is suitable for compound feed processing
External conical hole suitable for the processing of high-fibre feed like de-fat chaff
Internal conical hole and compression-type stepped hole applicable for the process of herbage powder feed of light proportion
We should try to avoid using release stepped hole(pressure-relief vent)
Because discharing is not easy for holes in the rows of the edge of ring die, pressure-relief vent is designed there.
 
Production process:
1.Precision Machining:
CNC machining center
CNC machining center assure high dimensional accuracy,geometric tolerance and surface roughness.
 
2.Hole Machining
Germany gun drill
 
The quality and service life of die is guaranteed.
 
3.Vacuum Hardening
 
America vacuum furnace:
1.High vacuum degree, no oxidation reaction in ring die surface, ensuring original smoothness of die hole 
inner surface.
2.High vacuum degree,twisting bottom and convection heating minimize ring die deformation.
3.CNC controls process program, ensuring ring die quality stability.
4.With rationally adjusting heat treatment, heat preservation and cooling rate and time, microstructure of 
ring die can achieve its most suitable working conditions.
5.High cooling speed ensures more even distribution of carbide and hardenability and uniformity of ring die is guaranteed, contributing to balance using of ring die.

You Might Also Like