Products

E- Glass GRP FRP Fiberglass Mat Tissue

China E-Glass GRP FRP Fiberglass Mat Tissue, Find details about China Fibergalss Mat, Fiberglass Tissue from E-Glass GRP FRP Fiberglass Mat Tissue

Model NO.
S-SM S-HM
Moisture Content(%)
Below0.2
Filament Diameter(µm)
12 ± 1
Standard Measurement(Mxm)
1 X 1000
Paper Core Internal Diameter(mm)
76 ~ 152
Binder Content(%)
6-9
Wet out (2 Layers)S
Below 12, Below 20
Grade
E-Glass
Width
40-3000
Trademark
ZLRC
Transport Package
as Your Requiremnt
Specification
weight: 20-120 G/M2 width: 50mm-2100mm
Origin
Beijing, China
HS Code
70191200
Model NO.
S-SM S-HM
Moisture Content(%)
Below0.2
Filament Diameter(µm)
12 ± 1
Standard Measurement(Mxm)
1 X 1000
Paper Core Internal Diameter(mm)
76 ~ 152
Binder Content(%)
6-9
Wet out (2 Layers)S
Below 12, Below 20
Grade
E-Glass
Width
40-3000
Trademark
ZLRC
Transport Package
as Your Requiremnt
Specification
weight: 20-120 G/M2 width: 50mm-2100mm
Origin
Beijing, China
HS Code
70191200
E-Glass GRP FRP Fiberglass Mat Tissue1. Product introduction

E-glass surface mat is produced with E-glass fiber under wet papermaking process, it is designed for use in filament winding process for manufacture of GRP pipe, storage tank etc, or in hand
lay-up process for improving GRP surface.Applicable for filament winding, hand lay-up
and compression molding process, etc.


2. Product feature
1. Uniform fiber distribution, even thickness
2. Smooth and soft surface
3. Low binder content
4. Fast resin impregnation
5. Good flexibility and mould obedience
6. Strong intensity and impact resistance
7. Good covering of the texture of under layers
8. Good corrosion resistance, water-proof and inflaming retarding
E-Glass GRP FRP Fiberglass Mat Tissue

3.Specifiaction
PropertyArea WeightMoisture ContentSize ContentBreakage StrengthWidth

 		(%)(%)(%)(N)(mm)
MathodsIS03374ISO3344ISO1887ISO3342
 
S-SM20±7.5≤0.206--8≥2040-3000
S-SM30≥30
S-SM50≥40
S-HM20≥20
S-HM30≥30
S-HM50≥40
Special specification can be produce according to customer requirements.


 

E-Glass GRP FRP Fiberglass Mat Tissue


4. Product classfication
   1)Fiberglass Tissue Mat for roofing
   2)Fiberglass Tissue Mat for flooring
   3)Fiberglass Tissue Mat for pipe wrapping
   4)Fiberglass Tissue Mat for FRP surface
   5)Fiberglass Tissue Mat for wall covering

5.Application
1) Improve the performances of surface layer.It can significantly improve the performances of surface layer to realize longer lifetime and resistance against corrosion,  leakage and compression.
2) Cover up the texture of underlayers .It is indispensable materials for high quality moulds and FRP products as it is capable of covering up the texture of underlayers to create high gloss surface that give rise to improved strength and corrosion resistance.

6.Product packaging:
Each Surface Tissue is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 330mm. The mat roll is wrapped up with plastic film,and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets.

7.Product storage:
Unless otherwise specified, Chopped Strand Mat should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15ºC~35ºC and 50%~75% respectively.
 

You Might Also Like