China Construction Tower Crane Hammered Tower Crane Qtz100 (TC5615), Find details about China Tower Crane, Topkit Tower Crane from Construction Tower Crane Hammered Tower Crane Qtz100 (TC5615)
Rated lifting torque | kN.m | 1000 | |||
Max. lifting capacity | t | 6 | |||
Working range | m | 3~56 | |||
Lifting Height | Independent | 46.2 | |||
Adhered | 180 | ||||
Lifting speed | Double magnification | m/min | 70/35 | ||
Quadruple magnification | 35/17.5 | ||||
Slewing speed | r/min | 0.62 | |||
Trolleying speed | m/min | 43.3/21.9 | |||
Climbing speed | 0.4 | ||||
Min. stable descending speed | ≤7 | ||||
Outer size of whole crane | Foundation frame | m | 8×8 | ||
Overall height | Independent | 55.892 | |||
Adhered | 160.892 | ||||
Tip of jib to the slewing center | 54.17 | ||||
Tip of balanced jib to slewing center | 13.39 | ||||
Total weight | Structure weight | Independent | t | 46 | |
Adhered | 86 | ||||
counterweight | 17.66 | ||||
Total motor capacity | kW | 41.52 | |||
Allowed operating temperature | ºC | -26~+40 | |||
Power supply parameters | 50/60Hz | ~380-440V±10% |
Jib length (m) | 3-28.3 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 |
Load(t) | 3 | 2.92 | 2.80 | 2.69 | 2.60 | 2.51 | 2.42 | 2.34 | 2.26 | 2.19 |
Jib length (m) | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 |
Load(t) | 2.12 | 2.05 | 2.0 | 1.93 | 1.88 | 1.82 | 1.77 | 1.73 | 1.70 | 1.67 |
Jib length (m) | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | |
Load(t) | 1.65 | 1.63 | 1.61 | 1.59 | 1.57 | 1.55 | 1.53 | 1.51 | 1.5 |
Jib length (m) | 3-15.3 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
Load(t) | 6 | 5.73 | 5.36 | 5.04 | 4.74 | 4.48 | 4.24 | 4.03 | 3.83 |
Jib length (m) | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
Load(t) | 3.65 | 3.48 | 3.33 | 3.18 | 3.05 | 2.93 | 2.81 | 2.71 | 2.61 |
Jib length (m) | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 |
Load(t) | 2.51 | 2.42 | 2.34 | 2.26 | 2.18 | 2.11 | 2.04 | 1.98 | 1.92 |
Jib length (m) | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 |
Load(t) | 1.86 | 1.81 | 1.75 | 1.70 | 1.66 | 1.63 | 1.61 | 1.59 | 1.57 |
Jib length (m) | 51 | 52 | 53 | 54 | 55 | 56 | |||
Load(t) | 1.55 | 1.53 | 1.51 | 1.49 | 1.47 | 1.45 |
Mechanical load factor | Hoisting mechanism | M5 | |||
Slewing mechanism | M4 | ||||
Trolleying mechanism | M4 | ||||
Hoisting mechanism | motor | Model | YZRDW225M1-4/8/24 | ||
Power(kw) | 24/24/5.4 | ||||
Height limiter | Model | FKDX-G | |||
Steel wire rope | Model | 6X37-15-1770- | |||
Max. pulling force (N) | 20000 | ||||
Magnification | a=2 | a=4 | |||
Lifting Speed (m/min) | 70 | 35 | 35 | 17.5 | |
Rated lifting capacity(t) | 1.5 | 3 | 3 | 6 | |
Min. stable descending speed | m/min | ≤7 | |||
Slewing mechanism | Motor | Model | YZR132M2-6 | ||
Power (kW) | 3.7×2 | ||||
Speed (r/min) | 908 | ||||
Reducer | Model | XX4-100.180 | |||
Transmission ratio | 180 | ||||
Hydraulic couplings | Model | YOX280A | |||
Slewing pinions | modulus m | 12 | |||
teeth z | 15 | ||||
Modification coefficient | +0.5 | ||||
Slewing speed | r/min | 0.62 | |||
Slewing bearings | Straight 4-point contact ball type bearings | Model | 011·45·1400 | ||
modulus m | 12 | ||||
teeth z | 131 | ||||
Hydraulic jacking mechanism | Motor | Model | Y132M-4B5 | ||
Power(kW) | 5.5 | ||||
Operating press of hydraulic oil tank | Mpa | 25 | |||
Max. lifting force | t | 50 | |||
Cylinder stroke | mm | 1600 | |||
Mounting space | mm | 2070 | |||
Diameter of oil tank | mm | φ160 | |||
Diameter of cylinder piston rod | mm | φ110 | |||
Climbing speed | m/min | 0.4 | |||
Trolleying mechanism | Motor | Model | YDEJ132S-4/8 | ||
Power (kw) | 4.5/3 | ||||
Steel wire rope | Specification | 6×19-7.7-1550- | |||
reducer | Model | BL22-43-3.3 | |||
Transmission ratio | 43 | ||||
Speed | m/min | 43.3/21.9 |