Products

Biaxial Structure Fiberglass Combination Mat for Bus Roofing

China Biaxial Structure Fiberglass Combination Mat for Bus Roofing, Find details about China Flow Mat, Combo Mat with PP from Biaxial Structure Fiberglass Combination Mat for Bus Roofing

Model NO.
BI600/180/600
PP
180GSM
Chopped Strand
600GSM
Application
Rtm or Infusion
Process
Lrtm
Trademark
utek
Transport Package
by Roll, Carton and Pallet
Specification
BI600/180/600
Origin
China
HS Code
70193900
Model NO.
BI600/180/600
PP
180GSM
Chopped Strand
600GSM
Application
Rtm or Infusion
Process
Lrtm
Trademark
utek
Transport Package
by Roll, Carton and Pallet
Specification
BI600/180/600
Origin
China
HS Code
70193900
Biaxial structure fiberglass flow mat is a stitch bonded composite reinforcement fabric containing a PP layer inside the fabric. The fabric consists of 4 layers: a PP non-woven layer in the middle, and chopped strands on one side of the PP layer, and roving in 0 and 90 degree on the other side.  

It comes from a combination of the flow medium of the core and the Biaxial structure. It is assembled in a single stitching process. It is designed for the production of composite parts that require a structural element, while at the same time optimizing the resin flow. In particular, it may be used in wind turbine nacelles, bus roofs, and other industrial parts.

It  Improves the mechanical properties of the parts (in terms of torsion, tensile strength, and compression) by the addition of the biaxial. A biaxial provides better mechanical performance than a fabric. (As there is no take-up, there is less resin between the fibers. )
Enables improvement of the surface aspect and chemical resistance due to the addition of a veil.

Technical Data:
 
IdLayerUnit1234Stitching
2.1Fibre orientationDegrees090Non-wovenCS 
2.2Nominal area weightg/m²300±5%300±5%180±5%600±5%10
2.3Roving/yarn weighttex1200±60 1200 ± 60-33 subtex150 dtex
2.5Av. filament diameterum1717-13Polyester(textured)
2.6Roving type-Direct roving
 		Direct roving
 		-Assembled roving 
2.7Resin compatibility UP, VEUP, VE UP, VE 
2.8Stitching type     Tricot, chain
2.9Space between needles     Gauge 7
2.10Stitching length     4.0mm

Packing & Storage:

Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

Picture of Product:

Biaxial Structure Fiberglass Combination Mat for Bus Roofing

Biaxial Structure Fiberglass Combination Mat for Bus Roofing

Biaxial Structure Fiberglass Combination Mat for Bus Roofing




Give us a chance, and we' ll return you with satisfaction. 

You Might Also Like