Plastic Polypropylene PP Biaxial Geogrids for Construction Price
China Plastic Polypropylene PP Biaxial Geogrids for Construction Price, Find details about China Bi-Axial Geogrid Composite, Tensar Arg from Plastic Polypropylene PP Biaxial Geogrids for Construction Price
Introduction
LY Biaxial Geogrid is manufactured from Polypropylene. It is produced through the process of extruding, punching, heating, longitudinal stretching and transverse stretching.
Performance
High tensile strength at both longitudinal and transverse direction
Applications
Soft foundation reinforcing for highway, railway
Slope protecting projects
Landfill sites
Benefits
Improving bearing capacity of foundation
Preventing cracking and subsiding
Convenient to construct, reducing cost and maintaining expense
Product introduction
BIAXIAL GEOGRID COMPOSITER is a composite made of bi-axial polypropylene (PP) geogrid, heat bonded to a long fiber non-woven polyester geotextile that acts as a filter and soil separator. This geogrid is manufactured using a punching and drawing process whereby the polypropylene sheet is stretched in two directions, machine (longitudinal) and cross-machine (transverse). The result is a monolithic and isotropic geogrid with thick and wide ribs, thick integral nodes, and uniform square apertures. Engineered to be mechanically and chemically stable in aggressive soil environments, THIS-GEOCOMPOSITE allows sub-base drainage to help maintain structural stability, and is very effective in keeping expensive imported material from being contaminated by migration of fines from the saturated base soils. Plastic bx geogrid composite mesh knitted geotextile
Plastic bx geogrid composite mesh knitted geotextile
Benefits:
- Reduces amount of aggregate needed= construction cost savings.
- Reduces soil excavation and backfilling= construction cost savings.
- Minimizes differential settlement and prevents upward movement of the subgrade = higher structural performance.
- Improves overall structural life= maintenance cost savings.
Applications:
- Site subgrades
- Railway ballasts
- Oil platform access roads
- Temporary military roads
- Mine haul roads
- Forestry and logging roads
- Coastal roads
- Parking lots
- Under hydro-electric transmission line towers
- Foundation support
| TESTED PROPERTY | TEST METHOD | UNIT ENGLISH(METRIC) | VALUE ENGLISH(METRIC) | |
| BI-AXIAL GEOGRID | MD | XD | ||
| Carbon Black Content | ASTM D 4218 | % | 2.0 | |
| Ultimate Tensile Strength{1} | ASTM D 6637 | lbs/ft(kN/m) | 1645(24.0) | 1645(24.0) |
| Tensile Strength at 2% strain{1} | ASTM D 6637 | lbs/ft(kN/m) | 720(10.5) | 720(10.5) |
| Tensile Strength at 5% strain{1} | ASTM D 6637 | lbs/ft(kN/m) | 1343(19.6) | 1343(19.6) |
| Junction Efficiency{2}{3} | GRI-GC2 | % | >95 | >95 |
| Flexural Rigidity{1} | ASTM D 7748 | mg-cm | 1000000 | |
| Aperture Stability{2}{4} | US.COE | m-N/deg | 0.65 | |
| Minimum Rib Thickness | Callipered | inch(mm) | 0.07(1.7) | 0.05(1.3) |
| Aperture Size{2}{5} | Nominal | inch(mm) | 1.33(34.0) | 1.22(31.0) |
| GEOTEXTILE | ||||
| Raw Material | Polyester, Continuous filament, needle punched | |||
| Ultimate Tensile Strength{1} | ASTM D 4595 | lbs/ft(kN/m) | 781(11.4) | 781(11.4) |
| Grab Strength{1} | ASTM D 4632 | lbs(kN) | 128(0.57) | |
| Trapezoidal Tear{1} | ASTM D 4533 | lbs(kN) | 56(0.25) | |
| Elongation at Ultimate{2} | ASTM D 4595 | % | 60 | 60 |
| CBR Burst Strength{1} | ASTM D 6241 | lbs(kN) | 540(2.4) | |
| Permeability | ASTM D 4491 | cm/sec | 0.41 | |
| Apparent Opening Size O9S | ASTM D 4751 | mm | 0.12 | |
| Mass Per Unit Area{2} | ASTM D 5261 | oz/yd2(g/m2) | 6.0(200) | |
| TYPICAL ROLL DIMENSIONS | ||||
| Roll Width | ft(m) | 12.79(3.9) | ||
| Roll Length{6} | ft(m) | 164.04(50.0) | ||
Plastic bx geogrid composite mesh knitted geotextile
NOTES: Plastic bx geogrid composite mesh knitted geotextile
{1}Minimum Average Roll Values(MaRV-calculated as (mean minus 2X standard deviation)
{2}Average Plastic bx geogrid composite mesh knitted geotextile
{3}Junction efficiency is defined as junction strength divided by multi-rib strength
{4}Resistance to in plane rotational movement measured at an applied momen = 2m-N{20kg-cm} in accordance with US Army Corps of Engineers methodology for the measurement of Torsional rigidity
{5}Aperture tolerance: within+/-10% coefficient of variance
{6}Custom length orders can be accommodated.
You Might Also Like
ANSI B16.9 Pipe Fitting Carbon Steel Concentric Reducer
LED 18W Linear Lamp Batten pendant Light
Wholesale S195 S1100 S1105 S1110 S1115 S1125 S1130 Single Cy......
Enamel Steel Biogas Digester Anaerobic Reactor Plant
Ca6140 Universal Metal Cutting Turning Engine Horizontal Man......
Forklift Truck 3.5 Ton Diesel on Sale
Kejie Wall Mounted Rechargeable Emergency Light
API Certified Xj550 Truck-Mounted Drilling Rig and Mobile Wo......
Zm01 Mini Mobile Thermal Receipt Printer Pocket WiFi Bill PO......
Household Stainless Steel and ABS Fruit and Vegetable Slicer