Hongfa Light Weight Concrete Hollow Core Wall Panel Machine
wall panel for concrete precast houses:
1.Full Automatic
2.Eco Saving and Advanced Technology
3.Low cost
4.ISO9001-2000
Introduction of Hongfa EPS light weight wall panel production line
1. Materials of Hongfa Brand EPS Wall Panel
Core Material: EPS( Foam polystyrene, Cement and fly ash.)
Board materials: Calcium Silicate Board.
2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
3. Applied range of light weight EPS wall panel
For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.
4. Advantages of Hongfa wall sandwich panel
Light weight----Excellent sound insulation----- Heat Insulation
Waterproof Fire proof--------- Energy Efficient Environmental
Convenient construction-----High Intensity without deformation.
1.Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the bad temperature control.
(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and material conveying to silos.
(7)Most components are of world-famous brands, with reliable performance, stable quality, long service life and low maintenance cost.
(8)The machine can realize the primary and second expansion.
5.Technical data of Hongfa cement EPS sandwich wall panel
S/N | Items | National Standards | Testing Indexes |
| 60mm | 90mm | 120mm | 60mm | 90mm | 120mm |
| 1 | Anti-impact performance | ≥5 | ≥5 | ≥5 | ≥8 | ≥10 | ≥15 |
| 2 | Anti-bending damage load/ Times over dead weight | ≥1.5 | ≥1.5 | ≥1.5 | ≥3 | ≥3 | ≥3 |
| 3 | Mpa Anti-pressure strength | ≥3.5 | ≥3.5 | ≥3.5 | ≥5 | ≥5 | ≥5 |
| 4 | Soften Coefficient | ≥0.80 | ≥0.80 | ≥0.80 | ≥0.80 | ≥0.80 | ≥0.80 |
| 5 | Kg/M2 Surface density | ≤70 | ≤90 | ≤110 | ≤45 | ≤61 | ≤78 |
| 6 | a/% Moisture rate | ≤12 | ≤10 | ≤8 | ≤10 | ≤9 | ≤7 |
| 7 | Mm/m Drying shrinkage value | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.45 | ≤0.5 | ≤0.5 |
| 8 | /N Single Point hanging strength | ≥1000 | ≥1000 | ≥1000 | ≥1200 | ≥1300 | ≥1500 |
| 9 | /Db Sound insulation capacity in the air | ≥30 | ≥35 | ≥40 | ≥35 | ≥40 | ≥45 |
| 10 | /h Fire proof limit/h | ≥1 | ≥1 | ≥1 | ≥3 | ≥4 | ≥4 |
| 11 | B/w/m2. k Heat transfer coefficient | / | / | ≤1.0 | ≤1.0 | ≤0.8 | ≤0.45 |
| 12 | Radioactivity limit | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 13 | IRa Inner radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 14 | Ir Outer radiation Index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Suggested Staffing Table:
| Position | Amount(Person) |
| Moulding/poring | 1 |
| Demoulding&Packing | 1 |
| EPS Expander Operation/raw materials | 1 |
| Mixer Operation | 1 |
| Transportation | 1 |
| Total | 5 |
Hongfa Light Weight Concrete Hollow Core Wall Panel Machine
Water requirements: to produce 60m2 panel (9 cm thickness a example) required one ton of water. No special requirements for water quality, clean water can be used for production.
Electricity requirement: installed power 100 kw (depending on the capacity)
Requirements on air and steam:Air compressor and boiler.
Land requirements:1200-2000m2 workshop and 9 meters high (depending on the capacity).
Hongfa Machinery Group
1. Guangxi Hongfa Heavy Machinery Group was established in 1990, is one of the largest block making manufacturer and leading supplier of the building block industry in China,as an ISO9001-2000 certificate and "Famous Brand in Guangxi"enterprise and member of China Building Block Association.
2. Main products: Concrete mixing plant,mixer, concrete block making machine,concrete tile making machine and concrete pipe making machine
Exhibition abroad in the next half year .
Oct. 18-21st, 2016 Phil construct 2016. in Manila, Phillippines
Oct. 13-15th, 2016 Mining Myanmar 2016 in Myanmar Convention Centre (MCC), Yangon
Dec.6-8th, 2016 Build ASIA 2016 Karachi in Pakistan
Hongfa Machinery Group'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Tech Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
Please not hesitate to contact us if you are interested in any kinds of products.
Contact Information:
Foreign Trade Dept. : Emily Lee
Guangxi Hongfa Heavy Machinery Co., Ltd.
Tel.:+86 15177094840
Wesite: gxhongfa.en.made-in-china.com