High Advanced Conveyor Belt Jointing Vulcanizing Press for Professional conveyor rubber Belt splicing

High Advanced Conveyor Belt Jointing Vulcanizing Press for Professional conveyor rubber Belt splicing

XL strip vulcanizing repair machine ,also known as the belt-edge repair vulcanizing machine, is mainly applied to repair the long-distance damage ,longitudinal piercing as well as edge damages on the conveyor belt on site .It's time-saving ,efficient and easy operated.

Specification

Use Installation instructions:

(1)Fill glue in the damaged areas that need to be repaired (see the adhesive part in the vulcanization process of the belt joints, or the demonstration by our staff when the equipment is being tested);

(2)Put the bottom plate, water pressure plate and lower heating plate under the damaged areas of the belt according to the structural diagram.

(3)Put the upper heating plate,Insulation board on the damaged areas of the belt.Align the top and bottom plates.

(4)Locked equidistantly then tighten the bolts.

(5)Get the first power wire well connected to electric control box. Connect the second wire with electric control box and the upper and down plates.Note that it corresponds to the sign on the electric control box.

(6)Connect the end of the high pressure pipe with inlet opening of water pressure plate. And connect another end of the high-pressure pipe with water output hole of water pump.Switch on, add pressure upon vulcanizing machine.

(See the operation method of ATX electric control box).

The equipment can be customized as two type: oil pressure and water pressure.

Packaging & Shipping

FAQ

01) Q: Normal delivery time?

A: We have table produce line, hot sale products normally HAVE STOCK. If customized, need about 30 working days
02) Q: Will you test the machine before shipping?
A: Yes, each machine, we will install and test before shipping. And testing pressure is higher than working pressure.

03) Q: Can you print our logo or without any logo?
A: It's no problem OEM. Before order, please send us the clear document of your logo, also the authorization paper to allow us to print your logo.

04) Q: Whether can visit your workshop and to see how to process the machine?
A: No problems, you are always welcomed to visit us, before order or before shipping.If need to see how to process the machines, please inform us what type machines you want to see, we will try to prepare the similar machines ready before you come.

05)Q: Is it possible to get the best price from your company?

Our price is always competitive in the market, and we promise to offer the best price based on the same quality.

06) Q: What's the payment term?

A:Normally we accept T/T 30% as deposit before production, pay the rest before delivery. 

Credict Assurance is the best choice. And other methods of payment need negotiation.