Thermal Lamination Film-with EVA for BOPP Printing
China Thermal Lamination Film-with EVA for BOPP Printing, Find details about China Thermal Laminating Film, BOPP Thermal Laminating Film from Thermal Lamination Film-with EVA for BOPP Printing
Basic Info.
Model NO.
BG BM DBG DBM
Thickness
21-27mic
Trademark
EKO
Transport Package
6rolls/CTN or 1roll/CTN
Origin
Foshan, China
Model NO.
BG BM DBG DBM
Thickness
21-27mic
Trademark
EKO
Transport Package
6rolls/CTN or 1roll/CTN
Origin
Foshan, China
Product Desciption
*Material
Surface layer: BOPP
Glue layer: EVA adhesive
*Specification
Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2
*Process parameter:
Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min
*Directions for using BOPP thermal laminating film:
Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.
*Packaging: 
Surface layer: BOPP
Glue layer: EVA adhesive
*Specification
Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: 300~1800mm
Length: 200~3000m
Paper core: 25.4mm (1 inch), 58mm(2.25inches), 76mm(3 inches)
Bonding: Less than 2
*Process parameter:
Equipment for thermal film: Dry and wet film laminator
Lamination temperature: 95~105c
Roller pressure: 10-20mpa
Speed: 8-20 m/min
*Directions for using BOPP thermal laminating film:
Normal process temperature is 90c-105c, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.
*Packaging:
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover