Products

132kw/ 175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A

China 132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A, Find details about China Rotary Compressor, Screw Machine from 132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A

Model NO.
AT-175A
Installation Type
Stationary Type
Type
Twin-Screw Compressor
Trademark
Alphabest
Transport Package
Wooden CTN
Specification
143*105*140cm
Origin
China
HS Code
8414809090
Model NO.
AT-175A
Installation Type
Stationary Type
Type
Twin-Screw Compressor
Trademark
Alphabest
Transport Package
Wooden CTN
Specification
143*105*140cm
Origin
China
HS Code
8414809090

Product Description:

The screw air compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor.
There are two types of single-screw and twin-screw. Generally speaking, the screw compressor refers to the twin-screw compressor. It was first proposed by the German H. Krigar in 1878. It was not until 1934 by A. Lysholm of the Royal Institute of Technology in Sweden that the technology was established, and it began to be applied in industry and achieved rapid development.

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Product Photo:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Product Specification:
 
ModelAT-75AAT-100AAT-120AAT-150AAT-175A
Air Delivery (m3/min)/ Pressur(Mpa)10.0/0.713.4/0.716.2/0.721/0.724.5/0.7
9.6/0.812.6/0.815.0/0.819.8/0.823.2/0.8
8.5/1011.2/1.013.8/1.017.4/1.020.5/1.0
7.6/1210.0/1.212.3/1.214.8/1.217.4/1.2
Cooling MethodAir Cooling
Lubrication Volume(L)6590
Driving ModeDirect Driven
Voltage220-440V;50/60Hz
Power(KW/HP)55/7575/10090/120110/150132/175
Start SystemVariable Frequency Starting
Size(cm)176*126*156176*126*156240*148*185
Weight9501050120018002200
Outlet size2"2"2&1/2"

Product Parameters:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Product Details:

New generation of high-efficient Airend
1.Advanced and energy saving spiral tooth-type technology.
2.New Type 5:6 asymmetrical rotator tooth type.
3.Power increased by more than 5%-10% in air dischage when compared to other ordinary machine.

High -efficient power system
1.The motor is energy saving and efficient, the bearing is used SKF.
2. The protection class of motor up to IP55 and insulation of F level, the efficiency can be increased for abut 5%.
3.The motor is low noise,low in vibratio and smooth in operation.

Coupling Transmission
1.Motor aligns the rigid coupling of the host automatically, and adopts imported elastic coupling, damping vibrates at impact,to ensure that the transmission is totally effective,without energy loss.
2.Direct link design,screw host engine and motor have low center of gravity,reduce the noise source and vibration source,and enhance the stability of the unit.

High Efficient oil and gas speraration system
with the world famous brand apoda oil and gas sperarator, reduce the oil content of the compressor exhaust gas and the oil content of the unit power consumption is only 1-2PPM.

Intelligent control system
1.Multi-Language can be switched according to your requirement.
2.With protection functions up to 12 types, such as overload,short circuit,low temperature, over voltage and so on.
3.Simply and clear, easy to operate.

Product Installation Diagram:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Product Application:
132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175AWorkshop Display:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Our Advantages:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Factory Overview:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
Global Market:

132kw/175HP Industrial Screw Air Compressor & Rotary Air Compressor at-175A
FAQ:

1.Q:Can you provide the samples to us?
    A: yes, we can provide the sample to you in free, but the cost of the freight on your account.

2. Q:Can you do the order according to the customer requirement?
     A:Yes, we can do the order according to your sample or drawings, OEM/ODM service provided.

3. Q:What is your delivery time?
    A:Normally, it's 7 days if the goods are in stock. It will  takes about 15-25days if the goods are not in stock, Mainly depends on the order quantity.

4.Q:What is your terms of payment?
    A:Generally 30% value of goods as deposit, balance amount against the copy of the BL.

5. Q: How long is the warranty ?
     A: 14 months since the container shipped except quick-wear parts.

You Might Also Like