Products

Wind Turbine Tower for Wind Turbine Model 100kw
Wind Turbine Tower for Wind Turbine Model 100kw

Wind Turbine Tower for Wind Turbine Model 100kw

China Wind Turbine Tower for Wind Turbine Model 100kw, Find details about China Wind Turbine Model, Wind Turbine Tower from Wind Turbine Tower for Wind Turbine Model 100kw

Model NO.
100kw
Power
10-100kW
Phase
Three Phase
Certification
CE, ISO, RoHS
Generator Type
Three Phrase AC Generator
Blades Materials
Riforced Fiber Glass
Gurantee
Two Years
Blades Number
3PCS
Controller
PLC
Certificates
CE/ISO9001/SGS
Trademark
Hengfeng
Transport Package
Polywood Case
Specification
100KW
Origin
China
HS Code
850231000
Model NO.
100kw
Power
10-100kW
Phase
Three Phase
Certification
CE, ISO, RoHS
Generator Type
Three Phrase AC Generator
Blades Materials
Riforced Fiber Glass
Gurantee
Two Years
Blades Number
3PCS
Controller
PLC
Certificates
CE/ISO9001/SGS
Trademark
Hengfeng
Transport Package
Polywood Case
Specification
100KW
Origin
China
HS Code
850231000
wind turbine tower for wind turbine model 100kw
Qingdao Hengfeng Wind Power Generator Co., Ltd is one of the leading medium and small wind turbine manufacturer in china. Company start at 2004, workshop covers more than 5000 square meters, Our company is in Huangdao district of Qingdao. It is about half an hour to Qingdao Airport , and 30mins to Qingdao port .The traffic is very convenient.
Wind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kw100KW wind turbine system parameters

Rated Power		 
100KW

 Max Power		120KW

 Diameter of Blades
22.0m

 Rated rotor speed
60r/m

 Rated speed
12m/s

 Output voltage
380v

 Start up wind speed
3m/s

 Work speed
3-30m/s

 Security wind speed
50m/s
Wind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kw
Power curve
Wind Turbine Tower for Wind Turbine Model 100kwAdvantages
1.wind turbine controllers are based on microcomputer control, PLC programmable logic control, man-machine interface, 256 color touch screen, operation more intuitive and convenient, rectifier components with temperature detection function, controller power acceptable input voltage range of 24-600V, in order to ensure the controller and the yaw motor can normal operation regardless of the circumstances, signal sensor is shielded cable connection, make sure signal transmission uninterrupted,  more reliable.
2.Detection internal voltage and current sensor is use of the 12 high-precision, the controller controls the generator yaw according to wind speed, wind direction, current, voltage etc combined effects. yaw of the minimum angle is1 degree (Note: do not like other manufacturers yaw minimum angle is 30 degrees), so that we can make more effective use of wind energy to obtain the maximum output power.
Add or delete control content based on customer requirements, it is possible to additional monitoring communications.
3.Direct drive permanent magnet generator: contains: Motor Stamping disk used is 470 silicon steel sheet, generator winding is pure copper wire which can be resistant to 180 degrees high temperature, high insulation properties, high permeability and high efficiency, high power generation efficiency, low-speed performance. In the light breeze wind speed the generator can generate electricity. Using advanced circuit automatic control system can automatically run reliably under adverse weather conditions, state-of-the-art technology, reliable unit performance, easy installation and maintenance. Controls, inverters, unloading blend.
4.Blade: propeller, wing style, aviation materials, hand mold making, flange pad connector ,convenient connection to install them without correction, the degree of balance is good . Airfoil blades, strength, fatigue resistance, and high efficiency.
Wind Turbine Tower for Wind Turbine Model 100kw
SYSTEM CONNECTION
Wind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kwWind Turbine Tower for Wind Turbine Model 100kw
FAQ
1. Are you factory?
Yes, we are facotry, and we produce Wind turbine system 600W-500KW 17 years in China.

2. How to select models?
Before purchasing, please contact us to confirm model No. and specifications to avoid any misunderstanding.

3. How do you ship the goods?
We normally ship goods by sea .
4. Can I test sample?
Yes, sample charged can be offered for testing.
 
5. Can we be agent or distributor?
Yes, welcome and we will support you.

6. Can you do OEM or ODM service?
Yes, we have R&D department and accept OEM service.

7. How about warranty?
24 MONTH warranty, technical support available, we always try our best to help customers to solve problems .
 

You Might Also Like