AEA Swing Check Valve is used to prevent back flow in the line. Flow is in a straight line through the valve resulting in minimal pressure drop. The disc swings into the open position as the media flows through the line. Back pressure in the line holds the disc in the closed position. Swing check valves may be installed in horizontal or vertical lines, but must be installed in proper relation to the media flow as indicated by the flow direction arrow marked on the body.
 

Swing Type Check Valve Manufacturer, NRV, Swing Type Non Return Valve, Exporter, Supplier, Stockist. Duplex Steel, Super Duplex Steel, Alloy 20, Hastelloy C22, C276, Austenitic Stainless Steel Material Check Valve Manufacturers.

Bolted Cover, Swing Type Disc Non Return Valve

 




Product Range
-Valve size: 
2" ~ 24" (DN50-DN600)
-Pressure:
PN16-PN64
-Temperature: 
-196ºC~ 500ºC
-Body Materials:
Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
-Trim (Disc/Stem):
Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel

 
Technical Specifications   
-Design: DIN 3356
-Face to Face: DIN 3202
-End Flange: DIN 2543-DIN 2545
-Test: DIN 3230
-Special: NACE MR-01-75


 
Design Features
-Body & Cover made from high quality casting with liberal sections.
-The castings are precision machined for high performance of valve.
-Bolted Cover design
-Body Seat Ring & Disc machined to close Tolerances providing smooth action and accurate seating.
-Seat Ring sealweld to the body
-Replaceable (Renewable) type Seat Ring & Integral Seat can also available on special request.
-Stellited Hard Face F6 Seat Ring & Disc also supply on requirement.
-All the disc have double lock nut or cotter pin fixed
-In built wear life for long duration of service.

Size and Dimensions: