SPS600 Large Hole Diameter Water Well Drilling Rig:SPS600 type drilling rig is suitable for the drilling work (within 600m) in soil, rock and gravel layer. It can be used in the drilling of water well and the exploitation of shallow geothermal energy, petroleum natural gas and salt. Mechanical transmission is adopted in this rig. Rotary table is used to drive the drill tools. This water well drilling rig has a main winch and an assistant winch. Trussed A-shaped derrick or quadrangle derrick is used as drill tower.
Features:1. This drilling rig is very easy to disassemble and transport;
2. This product features large torque, great hoisting capacity and wide range of rotating speed;
3. This water well drilling rig is capable of both direct and reverse circulation drilling;
4. We supply high precision drill rigs at very competitive prices. These rigs are designed to be durable and capable of running in the countries of the most complex geological conditions.
Before Use:1. Dig slurry pool and slurry circulating channel and stir the slurry;
2. Check the diesel engine and mud pump of the drilling rig;
3. Check if all components are stable and reliable;
4. Disconnec the clutch of the diesel engine, the cluth of the mud pump, the V-belt pulley, and the feeding hand wheel. Check the gearbox, the winches, cardan shaft and the rotary table for jam phenomena;
5. Lubricate the parts of the drilling rig according to the lubrication standard and diagram;
Maintenance and Repair:1. The surface of the drill rig should remain clean. Clean the slurry dirt and oil sludge frequently;
2. Check the temperature rise condition of the rolling bearing and each friction piece. The temperature of the bearing shouldn't exceed 70°. If the temperature exceed the requirement, operator should stop this water well drilling rig immediately and check it.
3. If knock sound and adnormal sounds appear when the gears are running, operator should stop the truck and check it;
4. If oil impregnate and leakage occurs in any sealed part, operator should stop the machine and solve the problem;
Notice: For secific operation, please refer to the detailed information of the product manual.
The technical parameter of the SPS600 water well drilling rig: | Type | SPS600 Drilling Rig |
| Drilling depth(m) | 600 |
| Rotary table normal diameter(mm) | 605 |
| Rotating speed(r/m) | 42, 75, 134 |
| Drill rod insider hole diameter (mm) | Φ73,Φ89 |
| Kelly (mmxmmxmm) | 108x108x8000; 108x108x12000 |
| Main winch |
| Single wire hoisting capacity (KN) | 35 |
| Rated load of big hook (KN) | 210 |
| Big hook hoisting speed(m/s) | 0.15-0.47 |
| Pulley block type | 3x3 |
| Spindle lifting power max.(KN) | 80 |
| Steel wire diameter (mm) | Φ20-Φ21.5 |
| Assistant winch |
| Rated single wire hoisting capacity (KN) | 15 |
| Max.single wire hoisting capacity (KN) | 20 |
| Single wire hoisting speed (m/s) | 0.58 |
| Steel wire diameter (mm) | Φ9.8 |
| Power (kw) | 37 |
| Main machine weight (t) | 5.5 |