Sale 2020year new caterpillar construction machinery 140k motor grader with 3teeth ripper

OVERVIEW:

• electronic throttle control, automated protection against downshifting when the grader is travelling too fast and variable horse power (VHP)
• automated torque management and an Autoshift feature
• direct drive powershift transmission with electronic control, with eight speeds in forward motion and six in reverse
• a load-sensing, closed-centre hydraulic system
• a frame designed for maximum strength and durability, and an optimally shaped moldboard with large throat clearance.

  Caterpillar 140K engine specifications

  Engine model gear	Cat® C7 ACERT™
  Number of cylinders	6
  Speed at rated power	2000 RPM
  Base power, first gear	128 kW net
  Variable horsepower (VHP), gears 1 and 2	128 kW net; 140 kW gross
  Variable horsepower (VHP), gear 3	135 kW net; 147 kW gross
  Variable horsepower (VHP), gears 4 to 8	143 kW net; 155 kW gross
  Displacement	7.2 litres
  Bore	105 millimetres
  Stroke	127 millimetres
  Torque rise	46%
  Torque, maximum, net	996 N·m
  Derating altitude	3048 metres
  Fan speed, maximum	1925 RPM
  High ambient capability	50° Celsius

  Caterpillar 140K transmission specifications

  Type	Direct drive, powershift
  Maximum forward speed	47.3 kilometres per hour
  Maximum reverse speed	37.4 kilometres per hour
  Number of forward gears	8
  Number of reverse gears	6

  Caterpillar 140K steering specifications

  Steering standard	ISO 5010:2007
  Turning radius	7.5 metres
  Steering range	47.5 degrees
  Articulation angle L/R	20 degrees

  Caterpillar 140K brakes

  Brake standard	ISO 3450:1996
  Service brakes	Air actuated, multiple oil-disc
  Secondary brakes	Dual circuit
  Parking brake	Air actuated, multiple oil-disc

  Caterpillar 140K motor grader dimensions

  Length between tandem axles	1523 millimetres
  Length, front axle to moldboard	2598 millimetres
  Length, front axle to mid tandem	6068 millimetres
  Length, front tyre to rear of machine	8504 millimetres
  Length, counterweight to ripper	10013 millimetres
  Height to top of cab	3354 millimetres
  Width, tyre centre lines	2065 millimetres
  Width, outside rear tyres	2452 millimetres
  Width, outside front tyres	2481 millimetres
  Ground clearance, centre front axle	626 millimetres
  Ground clearance, trans. case	362 millimetres

  Caterpillar 140K weights

  Gross vehicle weight, typically equipped	17510 kilograms
  Gross vehicle weight, maximum	22870 kilograms
  Gross weight of base, total	14292 kilograms
  Gross weight, base, front axle	4172 kilograms
  Gross weight, base, rear axle	10120 kilograms
  Gross weight, typically equipped, front axle	5053 kilograms
  Gross weight, typically equipped, rear axle	12457 kilograms
  Gross weight, maximum, front axle	8005 kilograms
  Gross weight, maximum, rear axle	14866 kilograms

  Caterpillar 140K service refill

  Fuel capacity	305 litres
  Cooling system	40 litres
  Engine oil	18 litres
  Transmission/differential/final drives	60 litres
  Tandem housing (each)	64 litres
  Front wheel spindle bearing housing	0.5 litre
  Circle drive housing	7 litres

  Caterpillar 140K frame

  Circle diameter	1530 millimetres
  Circle blade beam thickness	35 millimetres
  Drawbar height	127 millimetres
  Drawbar width	76.2 millimetres
  Front axle, height to centre	628 millimetres
  Front axle wheel lean, left/right	18 degrees
  Front axle, total oscillation per side	32 degrees
  Front-top/bottom plate, width	305 millimetres
  Front-top/bottom plate, thickness	25 millimetres
  Front-side plates, width	242 millimetres
  Front-side plates, thickness	12 millimetres
  Front-linear weights, minimum	165 kilograms/metre
  Front-linear weights, maximum	213 kilograms/metre
  Front-section modulus, minimum	2083 cubic centimetres
  Front-section modulus, maximum	4785 cubic centimetres

  Caterpillar 140K hydraulic system specifications

  Pump type	Variable piston
  Circuit type	Load sensing, closed center, proportional priority pressure compensating system
  Pump output, standard pump	159.1 liters per minute
  Pump output with optional high output pump	210.5 liters per minute
  Maximum system pressure	25500 kPa
  Standby pressure	3600 kPa
  Reservoir tank capacity	55 litres

  Caterpillar 140K moldboard specifications

  Moldboard height	610 millimetres
  Moldboard thickness	22 millimetres
  Blade width	3.7 metres
  Arc radius	413 millimetres
  Throat clearance	120 millimetres
  Cutting edge - width	152 millimetres
  Cutting edge - thickness	16 millimetres
  End bit - width	152 millimetres
  Blade pull - base GVW	9108 kilograms
  Blade pull - maximum GVW	13379 kilograms
  Down pressure - base GVW	7278 kilograms
  Down pressure - maximum GVW	13963 kilograms

  Caterpillar 140K blade range

  Circle centreshift, right	728 millimetres
  Circle centreshift, left	752 millimetres
  Moldboard sideshift, right	663 millimetres
  Moldboard sideshift, left	512 millimetres
  Maximum blade position angle	90 degrees
  Blade tip range, forward	40 degrees
  Blade tip range, backward	5 degrees
  Maximum shoulder reach outside of tyres, right	1978 millimetres
  Maximum shoulder reach outside of tyres, left	1896 millimetres
  Maximum lift above ground	480 millimetres
  Maximum depth of cut	735 millimetres

  Caterpillar 140K ripper

  Ripping depth, maximum	462 millimetres
  Ripper shank holders	5
  Ripper shank holder spacing	533 millimetres
  Penetration force	8694 kilograms
  Pryout force	11673 kilograms
  Machine length increase, beam raised	970 millimetres

  Caterpillar 140K scarifier

  Mid, V-Type: Working width	1184 millimetres
  Mid, V-Type: Scarifying depth, maximum	229 millimetres
  Mid, V-Type: Scarifier shank holders	11
  Mid, V-Type: Scarifier shank holder spacing	116 millimetres
  Rear: Working width	2300 millimetres
  Rear: Scarifying depth, maximum	266 millimetres
  Rear: Scarifier shank holders	9
  Rear: Scarifier shank holder spacing	267 millimetres

  Caterpillar 140K tandems

  Height	506 millimetres
  Width	201 millimetres
  Sidewall thickness, inner	16 millimetres
  Sidewall thickness, outer	18 millimetres
  Drive chain pitch	51 millimetres
  Wheel axle spacing	1522 millimetres
  Tandem oscillation, front up	15 degrees
  Tandem oscillation, front down	25 degrees

• 
  
  
  
  
   

KNOW MORE ABOUT US ===========================
Our company do win-win business with good exporting business reputation which provide used /second hand construction mahcinery, for instance used wheel loaders,used excavators, used motor graders , used bulldozers ,road rollers ,mixer trucks ,dump trucks ,cranes ,forklifts ,tractor trucks ,and pump trucks . The above is the hot sale line for global market with the following advantage .

      1>Original parts and good working condition;
      2>Low working hours and well-test service for machinery 
      3>Strong engine power .
      4>Complete accessory and no oil leaking;
      5>Competitive price ,price is negotiatable to some degree .
      6>Good After-sales Service!

WELCOME U CONTACT US AND VISIT US TO INSPECT MACHINERY ,WE CAN OFFER THE PRE-SALE RESEPTION SERVICES .,
      1) Pick you up at airport;
      2) Reservate hotel for you;
      3) Guide u visit the tourist points in shanghai when u are free after finish business .

BUSINESS LINE =========================
Used Truck Crane
1. KATO: NK250E, NK350E, NK400E-3, NK500E, NK550E
2. TADANO: TL250E, TL300E, TG500E, TG550E, TG650E
Used Crawler Crane
1. HITACHI KH125 35T, KH180 50T, KH700 150T
2. KOBELCO 7045 50T, 5100 100T, 7150 150T
3. SUMITOMO LS118 50T, LS238 100T, LS248 100T
Used Excavator
1. Used hitachi excavator: EX100WD, EX120, EX200-1, EX200-2, EX200-3, EX200-5, EX350, ZAXIS200, ZAXIS230
2. KOMATSU PC60, PC120, PC130-7, PC200, PC210, PC220
3. CAT CAT312B, CAT320B, CAT320C, CAT325B, CAT330B, CAT 330C
4. HYUNDAI, DAEWOO, KEBOLCO, SIMITOMO, etc
Used Wheel Loader
1. KOMATSU WA300, WA350, WA360, WA380, WA400, WA470
2. CAT CAT936E, CAT950B, CAT950F, CAT966D, CAT 966E, CAT966F
3. KAWASAKI KLD65Z, KLD70, KLD70B, KLD80, KLD85, KLD85Z
4. TCM TCM230, TCM870,TCM75B
Used Bulldozer
1. CATERPILLAR D6D, D6H, D7H, D7G, D8 K, D8N, D9L
2. KOMATSU D75A-1, D85A-18, D85A-21, D155-1, D155-2, D355, D375
Used Motor Grader
1. CAT 12G, 120G, 14G, 140H
2. KOMATSU GD511A, GD605R, GD623A
Road roller
1. DYNAPAC CA25, CA30 (weight: 8T-14T)
2. BOMAG BW213D-2, BW217D-2, BW219D-2
TRUCK 
DUMP TRUCK :ISUZU ,MITSUBISHI ,NISSAN-UD ,HOWO 
MIXER TRUCK :ISUZU ,NISSAN-UD ,HINO ,FUSO ,MITSUBISHI 
PUMP TRUCK :PUTZMEISTER ,ZOOMLINE 

TRADE TERMS ===========================EXPORT CASES/CLIENT VISIT  ================


http://qinwomy.en.made-in-china.com  
Welcome you to contact us to consult wheeled caterpillar machine cat 140 motor grader .