Products

15dBm 68db RF Mobile Signal Repeater/ Tetra Amplifier

China 15dBm 68db RF Mobile Signal Repeater/ Tetra Amplifier, Find details about China Repeater, Tetra Repeater from 15dBm 68db RF Mobile Signal Repeater/ Tetra Amplifier

Model NO.
ET-CR15S-F
Gain
68db
Work Environment
Indoor
AC
94-264V
Trademark
etenda
Specification
CE, ROHS
Origin
Shenzhen
HS Code
8517611010
Model NO.
ET-CR15S-F
Gain
68db
Work Environment
Indoor
AC
94-264V
Trademark
etenda
Specification
CE, ROHS
Origin
Shenzhen
HS Code
8517611010
15dBm 68db RF Mobile Signal Repeater/ tetra amplifier  

Overview:

ET-CR15S-F single system series are designed for 100-600sqm indoor coverage solution. Such as the Villa, the Restaurant, the coffee shop, the KTV, the bar...It can support any system of CDMA, GSM, DCS, PCS, WCDMA, AWS, LTE.
Using a revolutionary technology that protects the carrier network, the ET-CR15S-F single system improves indoor cell phone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.

Features:

1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.15dB MGC(Manual gain control) 5dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption - 6W only.

Specifications:
Electrical specificationUplinkDownlink
Frequency RangeCDMA450452.5 ~ 457.5MHz462.5~ 467.5 MHz
Max .Gain≥ 60dB≥ 68dB
Max .Output Power
≥10dBm≥15dBm
Band width (-3dB)Wide Band
MGC ( Step Attenuation )≥ 15dB
5, 10 and 15dB with two DIP switches
Automatic Level Control≥ 15dB,auto shut off after 15dB
Gain FlatnessGSM & CDMATpy ≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P)
WCDMA≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P)
Noise Figure≤ 6dB
VSWR≤ 1.8
Group Delay≤ 1.0μs
Frequency stability≤ 0.01ppm
Spurious Emission &GSM Meet ETSI TS 151 026 V 6.1.0
Output inter-modulationWCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )

CDMA Meet IS95 & CDMA2000
WCDMA SystemSpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy≤ 12.5%
Peak Code Domain Error≤ -35dB@Spreading Factor 256
CDMA SystemRhoρ > 0.980
ACPRMeet IS95 & CDMA2000
LED AlarmStandard
Power LEDGreen light when power on.
ALC LEDOrange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 seconds red color
Mechanical SpecificationsStandard
I /O PortN-Female
Impedance50 ohm
Operating Temperature-25ºC~+55ºC
Environment ConditionsIP40
Dimensions176x100x43mm
Weight≤ 0.85Kg
Power SupplyInput AC90~264V,output DC5V / 2A
 

You Might Also Like