2018 hot sale waste tyre cutter rubber crusher
 
The Working Process:
 
 
 
1. LS-1200 singe wire drawing machine(hydraulic)
 
Use: pulling out the steel wire loop from the mouth of tire ,
 
structural features
 
The hooke of drawing machine is made of alloy
 
Machines have protective frame, which can effectively prevent wire circle in the process of pulling on safety factor.
 
Motor and reducer, and as a whole, the structure is compact.
 
The machine use the whole floor, convenient installation.
 
use
This machine have three hydraulic rams technical parameters
 
 
 
2.CJ-1200 tire cutter
Use: cutting the whole tire into several piece , this can protect the blade of the next machine .
 
Use:more than 800 tyres need this kind of cutting machine, after cutting can break in the broken tire machine.
The cutter machine is made up of motor, hydraulic system, oil cylinder, one pair of blade, frame and rotating body etc.
The basic principle is: motor drive hydraulic system and the cylinder, place the tire betwork to lock arm, fasten two tire ,two blades rotating blades forming shear, achieve the effect of shear.
Feature:
This equipment, good shear effect,shearing speed, low energy consumption, small volume, convenient, because use the hydraulic system, easy operation and safety.
Mechanical description: the tires more than 800 need to cut,and cut into four pieces in general.the size of piece is 200-500mm
technical parameters:
 
 
3.ZPS-900 whole type shredder
This product is our company introduces the advanced technology research and absorbing and second generation product. At the general temperature, can be put directly into the tyre antrum coarse crushing into 50 * 50 block, so the next rotating can grind into 10-30 meshes tagma or wire and fiber separation equipment.
Feature:
This machine is a compact structure, advanced technology, low energy consumption, high efficiency, smashing off the test room for the structure, maintenance is particularly convenient; tools with carbide surfacing technology, high hardness, high wear resistance, and repeated repair using, so has a longer service life; rotary screen for the lattice structure of steel mesh, blanking large area, enabling the screening of qualified rubber. After the partition of large tires can achieve the effect of the same!
Mechanical description;the tire of 800mm diameter and rubber ring can directly breaken into 50-300 mmof plastic block.
Principle:
Motor drive hydraulic motors through planetary gear reducer with a strong cutting torque, at gerenal temperature, continuous cutting, pressing, frustrated, after grinding, crushing the material into the cutting room the initial cut into blocks, the automatic sorting sieve screen, broken qualified material output, the rest of the larger materials with other materials to be broken again with the broken back to cutting room, and so forth until the output of qualified circulation of materials.
technical parameters:
 
5.XKP-480 Double-roll rubber breaker
used to break waste tire block into 10-30mesh rubber power and separate the steel wire from the rubber block at the same time
technical parameters:
The rollers adopt alloy cold hardcast irons, wear-resisting durable, have a double clean rollers, single ditch roller, double-ray roller of points. Mill flour be teeth, high. Can automatic grinding, hit back and forth required mesh of powder.(26mesh)
 
 
 
 
280 Fine rubber power pulverizer unit
 
Use:each unit has three buncher,This device is water-cooled system, product for 20-80 mesh fineness (can be adjusted.).
 
Structure and Principle: This machine is made up of three sets of crusher hosts,Tornado collection agency and set of electrical equipment. The host is mde up of frame ,main motor,Set of electrical equipment,feeding mechanisms,Regulatory agencies,A pair of moving disc and fixed disc set.The basic principle for the relative motion through two micropipette grinding materials, cutting, grinding and achieve the goal. Using the wind, water temperature, effectively controlled by powder grinding materials to ensure the quality. Sheets-feeder chooses stepless speed, can according to different materials, and adjust the corresponding feeding speed, thus obtains the optimal output and quality. Through collecting agencies, take whirlwind, without any product powder dust. Small size, low noise, high output, low energy consumption, simple operation, easy disassembly, without any environmental pollution. Income and fine powder with numerous burr and powder surface fractal, easy and other colloid.
 
technical parameters:
 
 
Of this Waste Tyre Recycling Machine For Rubber Powder, if you have any problem can contact me at any time!