Lipopolysaccharides Lps From Escherichia Coli Cell Culture Endotoxin
China Lipopolysaccharides Lps From Escherichia Coli Cell Culture Endotoxin, Find details about China Lipopolysaccharides Lps, Cell Culture Endotoxin from Lipopolysaccharides Lps From Escherichia Coli Cell Culture Endotoxin
Basic Info.
Model NO.
G5032-10MG
Source
Dry Powder
Habit Appellation
Chemical Medicine
Application
Industry, Scientific Research
Property
Biochemical Reagent
Trademark
Servicebio
Specification
10MG
Origin
China
Model NO.
G5032-10MG
Source
Dry Powder
Habit Appellation
Chemical Medicine
Application
Industry, Scientific Research
Property
Biochemical Reagent
Trademark
Servicebio
Specification
10MG
Origin
China
Product Desciption
Product introduction:
Lipopolysaccharides, LPS for short, is a unique component in the cell wall of Gram-negative bacteria, located in the outermost layer of the cell wall. Structurally, LPS is composed of lipid A, core polysaccharides and O-polysaccharide side chains. Lipid A is the main component of bacterial endotoxin. LPS is difficult to fall off from the cell wall. When bacteria die, they fall off by dissolving and destroying cells. LPS can cause a cascade of immune stimulation and toxic pathophysiological activities of the body, and has a toxic effect on animal cells. LPS is also called endotoxin due to its non-secreted toxin properties in bacteria.
This product is derived from the serotype Escherichia coli O55:B5.
Main parameters
Properties: white to slightly brown flocculent freeze-dried powder
Source: Escherichia coli O55: B5
Vitality unit: endotoxin level ≥500,000 EU/mg
Product list:
Storage and transportation
Transport in wet ice; store at 4°C, valid for 2 years.
Instructions:
LPS powder is non-sterile and needs to be filtered and sterilized when used in cell culture animal experiments. You can first dissolve the LPS powder in a balanced salt solution to prepare a high-concentration (for example, 1 mg/mL) storage solution. After sterilization by 0.22 μm filter, the LPS powder can be divided into small aliquots, which can be stored stably at -20°C for at least 12 months. Avoid repeated freezing and thawing. When using, dilute with balanced salt solution or culture medium to the required working solution concentration.
Notes:
1. LPS can be adsorbed on plastic or some glassware, especially when the concentration is lower than 0.1 mg/mL, so be careful when diluting the working fluid. When the LPS concentration is greater than 1 mg/mL, the above-mentioned adsorption effect is negligible.
2. For your safety and health, please wear lab coats and disposable gloves for operation.
This product is for scientific research purposes only, not for clinical diagnosis!
Lipopolysaccharides, LPS for short, is a unique component in the cell wall of Gram-negative bacteria, located in the outermost layer of the cell wall. Structurally, LPS is composed of lipid A, core polysaccharides and O-polysaccharide side chains. Lipid A is the main component of bacterial endotoxin. LPS is difficult to fall off from the cell wall. When bacteria die, they fall off by dissolving and destroying cells. LPS can cause a cascade of immune stimulation and toxic pathophysiological activities of the body, and has a toxic effect on animal cells. LPS is also called endotoxin due to its non-secreted toxin properties in bacteria.
This product is derived from the serotype Escherichia coli O55:B5.
Main parameters
Properties: white to slightly brown flocculent freeze-dried powder
Source: Escherichia coli O55: B5
Vitality unit: endotoxin level ≥500,000 EU/mg
Product list:
| Cat. No. | Product description | Volume |
| G5032-10MG | Lipopolysaccharides LPS | 10MG |
Storage and transportation
Transport in wet ice; store at 4°C, valid for 2 years.
Instructions:
LPS powder is non-sterile and needs to be filtered and sterilized when used in cell culture animal experiments. You can first dissolve the LPS powder in a balanced salt solution to prepare a high-concentration (for example, 1 mg/mL) storage solution. After sterilization by 0.22 μm filter, the LPS powder can be divided into small aliquots, which can be stored stably at -20°C for at least 12 months. Avoid repeated freezing and thawing. When using, dilute with balanced salt solution or culture medium to the required working solution concentration.
Notes:
1. LPS can be adsorbed on plastic or some glassware, especially when the concentration is lower than 0.1 mg/mL, so be careful when diluting the working fluid. When the LPS concentration is greater than 1 mg/mL, the above-mentioned adsorption effect is negligible.
2. For your safety and health, please wear lab coats and disposable gloves for operation.
This product is for scientific research purposes only, not for clinical diagnosis!
You Might Also Like
Iron Can Bottom Holder Paper Pad with Grey Color
Thermal Break Aluminum Casement Window with Built-in Blind
Flexible Electric Wire Copper Conductor PVC Insulated Power ......
Audio Karaoke Professional Power Amplifier DSP18000q with CE......
Car Auto Truck Water Pump for Mazda Lf0115100A 1f7015010 L32......
PVC Water Pipe Extrusion Line/ Production Machine/ Extruder
21inch Front/Rear Alloy Wheel Replica Wheel for BMW X5
6 Inch Wellbore Pump, Three-Phase Stainless Steel Submersibl......
New Modern Commercial Design System Security Exterior Iron E......
2021 Newest Design Thermiva Microneedle Fractional RF Machin......
Mini Screw Barrel for Filament Extruder Machine for 3D Print......
En856 R13 High Quality Hydraulic Rubber Oil Hose for Oil Pum......