Products

Fuse Fuse Test Equipment

China Fuse Fuse Test Equipment, Find details about China Sudden Jump Thermostat Test Equipment, Fuse Fuse Test Equipment from Fuse Fuse Test Equipment

Model NO.
QX-96-01
Loading Method
No
Display
Needle
Control
Computer Control
Weight
100-500Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALLISON
Transport Package
Wooden Box
Specification
1200*750*1650 MM
Origin
Made in China
Model NO.
QX-96-01
Loading Method
No
Display
Needle
Control
Computer Control
Weight
100-500Kg
Power Source
AC380V
Oil Cylinder Position
No
Trademark
ALLISON
Transport Package
Wooden Box
Specification
1200*750*1650 MM
Origin
Made in China
Sudden jump thermostat test equipment
lIntroduction:
  It is suitable for temperature controller to carry out temperature characteristic test and simulate actual working condition life test, aiming at IQC test of laboratory incoming materials. It can judge the test sample effectively and quickly. Technical characteristics:
  Equipment power supply: 0-380VAC / 50Hz/60Hz  4.5kw; Measurement temperature range: room temperature + 10 ºC - 300 ºC,instrument temperature measurement accuracy ± 0.5 ºC or 0.5%, resolution 0.1 ºC;
Test station: 20 stations;
product can be monitored by the instrument / PLC
programming;
1.Life test rate: about 1-3 times / min;
2.Life test count: 1-99999 times can be preset;
3.Automatic judgment on-off function: switch / temperature
4.abnormal alarm output. Sound light alarm is adopted;
5.Temperature measurement: K-type graduation line is used for temperature sampling, 2 channels in total; The speed of temperature rise and fall can be changed by
6.adjusting the heating power; Use air source: use clean and anhydrous compressed air to drive the cylinder and cool the product, and the air pressure of the air source shall not be less than 5kgf / cm2; the air source shall be provided by the user; Box: aluminum +
7powder spraying;Boundary dimension of equipment: about 1150mm x 600mm x 1650mm.
-----------------------------------------------------
Fuse Fuse Test Equipment
 
Fuse Fuse Test Equipment
Fuse Fuse Test Equipment
Fuse Fuse Test Equipment
 
Resistance temperature controller performance test machine
Introduction:
  Temperature controller integrated performance testing table is suitable for temperature characteristics and simulation of actual service life test of temperature controller, for laboratory and incoming material inspection IQC testing use. It can effectively and quickly judge the comprehensive performance and life test of test samples. General purpose jump thermostat, thermal protector, NTC thermostat, expansion thermostat, safety tube, etc.
Technical characteristics:
  Technical characteristics:
1.Equipment power supply: AC220V  50Hz  80kw;
2.Measuring temperature range: room temperature +10ºC-300ºC; 3.Test station: 3 station DC + 3 station AC (customized);
4.Test the operating temperature and reset temperature of the product and record relevant operating temperature and operating cycle times; 5.Life test rate: about 1-6 times/min;
6.Life test count: 1-999999 times;
7.Preset periodic count: 0-999999 times;
8.Automatic on-off function: switch/abnormal temperature
9.alarm output. Sound and light alarm is adopted;
10Temperature measurement: The k-type dividing line is adopted for temperature sampling, and each station is tested independently; 10Heating method: hot aluminum plate/hot maple gun;
11.Voltage: 0-500V adjustable 0-60A adjustable;
12.Power factor: 0.6-1.0;
13Cooling mode: blast/compressed air;
14.Equipment size: 1250×680×1680mm;
15.Power supply: AC 0-380V  50Hz/60Hz   3.5KW.
-----------------------------------------------------
Fuse Fuse Test Equipment
 
Low temperature oil tank test equipment
Introduction:
  The thermostatic electric water bath equipment is mainly used for temperature test of products in the laboratory, distillation, drying, concentration, and temperature-soaked chemicals or biological products. It can also be used for constant temperature heating and other temperature testing. It is an essential tool for biology, aquatic products, environmental protection, medicine, health, laboratory, laboratory, education and scientific research.
   Technical characteristics:
1.Power supply: AC220V  50Hz 2.0KW;
 2.Temperature range: -80ºC -- +300ºC
3.Test liquids: water, sprinkling essence silicone oil, frozen oil, etc; 4.Mixing method: water circulation/motor stirring/magnetic stirring; 5.Heating method: electric heating;
6.Temperature control mode: PID;
7.Automatic function: switch/abnormal temperature   alarm output; 8.Temperature control accuracy: 0.5 degree, 0.1 degree, 0.01 degree; 9.Heating method: hot aluminum plate/hot maple gun;
10.Voltage: 0-500V adjustable 0-60A adjustable;
11.Power supply: AC 0-380V  50Hz/60Hz   5.5KW.
12.Equipment size: 850×700×1280mm.
-----------------------------------------------------
Fuse Fuse Test Equipment
Oil tank test equipment
Technical characteristics:
Power supply: 220V50Hz 60Hz   / 380V50H 60Hz;
Temperature range: 300ºC - -100ºC;
Temperature control accuracy: ± 0.05%;
Temperature uniformity ≤ 0.02 ºC;
Cooling mode: compressor cooling;
Medium: silicone oil / alcohol /
Frozen liquid; Minimum temperature rise rate 0.5 ºC / min; Specification of box medium: 35cm × 35cm; Software supports automatic data saving; The equipment has leakage protection and undervoltage protection safety devices;
Exportable report type data; Support automatic completion of multi temperature point setting; Hot and cold switching: servo control; Switching rate: 0.5m/s;
Switching time/times: 0-99999 adjustable Equipment size: 1450×650×1450mm.
-----------------------------------------------------
Fuse Fuse Test Equipment
 
Fuse fuse test equipment
Introduction:
 This test-bed is used to test the fuse performance of the fuse under the rated working current. It can test two safety t ubes in series at the same time. It can preset the power on working time and interval time, and record the total effective continuous load time. PLC system control with data export function.

Structure:
   The test bench is a bench structure, with the overall dimension of about: length (60mm) × width (500mm) × height (1250mm). The control box is pressed by powder spraying plate, the surface is spray treated, and the bottom has 4 shock absorption rubber feet, which can be placed on the ground.
   The supporting table is made of physical and chemical plates.
   The front side is the control panel, which displays the current of the working circuit of the fuse, the total effective continuous power on time, the control function indicator, the on/off indicator, the power switch, and the control box is equipped with electronic control devices, special control boards, etc.
.Technical characteristics:
1.Detection current range: 0-80a (adjustable);
2.Time setting: 0 ~ 99999 seconds (adjustable); ,
3.Time mode selection: long time operation/periodic operation; 4.Control mode, PLC + 7 Inch Touch;
5.quipment power supply: AC 0-380V  50Hz/60Hz    3.5kw; 6.Equipment size: 600×750×1650mm.
-----------------------------------------------------
Fuse Fuse Test Equipment
liquid expansion temperature controller test machine

Introduction:
This equipment is used for the life test bench of liquid expansion type temperature limiter and sudden temperature controller. According to relevant test standards and customer requirements, the life test of manual reset temperature limiter and automatic reset sudden temperature controller is carried out. The user can choose to add load or not according to the test requirements. The test bench is mainly controlled by PLC, and the touch screen human-machine interface is friendly and flexible, The main accessories are imported and domestic well-known brands, stable and reliable, easy to operate.
Technical characteristics:
1.Test station: 5 (3 for liquid expansion temperature limiter and 2 for sudden temperature controller);
2.Suitable temperature: room temperature-200 ºC, thermostat and temperature limiter;
3.Heating mode: constant temperature oil tank and imported heater; 4.Oil tank temperature accuracy: ± 0.01 ºC;
5.Heating time: 0-999.9 seconds (upper limit setting possible); 6.Cooling mode: adopt imported fan for cooling;
7.Cooling time: 0-999.9 seconds (upper limit setting possible); Test speed: 2-15 times / min;
8.Reset mode: cooling automatic reset / cooling fixture reset;
9.The single station load current of the test bench is
10.designed to withstand more than 20A;
11.Test load: 5 ways; 12.Test times: 0-999999 times can be preset; 13.Equipment power supply: AC 0-380V  50Hz/60Hz  4.5kw; 14Equipment size: 1480×650×1650mm.
-----------------------------------------------------
Fuse Fuse Test Equipment
 
Cold and hot switch oil tank test equipment
Introduction:
   Cold and hot alternant temperature controller performance testing table, widely used in the electronic industry, petrochemical industry, household appliances temperature controller industry, temperature sensor industry and other industries. Mainly for temperature controller, temperature sensor probe and other performance detection and research and development of equipment
Technical characteristics:
1.Test station: 20 products;
2.Adopt double groove mode: high temperature groove and low temperature groove;
3.Resistance measurement range: 0-3000 Ω, accuracy 0.001M Ω; 4.Cold and hot alternate test speed: 0-30 times / min;
5.Temperature range: high temperature RT+10-300 ºC, low temperature 0-negative 100 ºC;
6.Control mode: one key test data acquisition mode and life test mode; 7.Control mode: 10 inch PLC + remote mobile phone control;
8.Lifting mode: servo drive;
9.Temperature monitoring mode: 4 + 1 control measurement;
10.Test sample: 2-wire, 3-wire, 4-wire; Switching time: maximum speed 3S / time;
11.Data display mode: numerical value / curve; 4G/5G remote control;
12.Data export: USB;
13.Horizontal hole size: φ200×200mm;
14.Dimensions: 1850×900×1680mm;
15Power supply: AC 0-380V  50Hz/60Hz   12.5KW.
-----------------------------------------------------
Fuse Fuse Test Equipment

 

You Might Also Like