Linear Motion Guideway with Linear Block and Rail
China Linear Motion Guideway with Linear Block and Rail, Find details about China Linear Guideway, High Accurate Linear Motion Guideway from Linear Motion Guideway with Linear Block and Rail
Basic Info.
Model NO.
HGW15HA~HGW65HA
Feature
Take Load in All Directions
Certification
CE, ISO 9001:2000
Model No.
15, 20, 25, 30, 35,45
Series
Heavy Load, Super Heavy Load, Quiet
Types
Interchangeable & Non-Interchangeable
Linear Block
Aluminium
Rail
Bearing Steel
Precision Code
C, H, P
Preload Code
Zo, Za, Zb
Trademark
SGC
Transport Package
Plastic Bag+ Outer Carton+ Pallet
Origin
China
Model NO.
HGW15HA~HGW65HA
Feature
Take Load in All Directions
Certification
CE, ISO 9001:2000
Model No.
15, 20, 25, 30, 35,45
Series
Heavy Load, Super Heavy Load, Quiet
Types
Interchangeable & Non-Interchangeable
Linear Block
Aluminium
Rail
Bearing Steel
Precision Code
C, H, P
Preload Code
Zo, Za, Zb
Trademark
SGC
Transport Package
Plastic Bag+ Outer Carton+ Pallet
Origin
China
Product Desciption
1. Types & Series
2. General Information
SGS Linear Guideway can be classified into non-interchangeable and interchangeable types. The sizes are identical. The main difference is that the interchangeable blocks and rails can be freely exchanged. Because of dimensional control, the interchangeable type linear guideway is a perfect choice for the client when rails do not need to be paired for an axis; For high precision grades consider ordering a matched, non-interchangeable, assembly of a block and rail.
The advantages of non-interchangeable types against interchangeable types:
1). Since the blocks and the rails are produced separately, they're installed under the general standard. In this case, the over loose or over tighten is still existed even the client installs the interchangeable linear guideway following a recommended installation procedure.
2). If the blocks and rails installed in our company, we will achieve highly accurate linear motion.
3). If the linear guideway is installed by un-skilled staffs, the balls are easily taken off.
4). If accompanied with a ballscrew, pre-load requirement, and achieve for ≤0.05mm accuracy, we suggest to choose non-interchangeable linear guideway.
Grinding or Milling Height:
1). The tolerance of non-grinding: ±0.1mm(General Standard)
2). The tolerance after Grinding: 0~0.03mm(General Standard)
Remarks: If accompanied with a ballscrew, pre-load requirement, and achieve for ≤0.05mm accuracy, we suggest to grind or mill height.
3. Dimensions for SGC ZT/ZQ Series
3.1. ZTH/ZTL High Rigidity
3.2. ZTW High Rigidity
3.3. ZQH/ZQL High Dust Protection
3.4. ZQW High Dust Protection
4. Dimensions for SGC HG & EG Series
4.1 HGH-CA / HGH-HA
4.2. HGW-CA / HGW-HA
4.3. EGH-SA / EGH-CA
4.4. EGW-SA / EGW-CA
5. Applications:
5.1. ZT Series- CNC machining centres, Heavy duty cutting machines, CNC grinding machines, Injection molding machines, Electric discharge machines, Wire cutting machines, Plano millers.
5.2. ZQ Series- Precision measure equipments, Semiconductor equipments, Automatic equipments, Laser marking machines, and in high-tech industry required high speed, low noise, low dust generation.
5.3. HG Series- Grinding, Milling, and drilling machines, lathe, machine centre.
5.4. EG Series- Automatic equipments, High speed transfer device, Semiconductor equipments, Wood cutting machines, Precision measure equipments.
Q1: Can I get a free sample?
A1: We provide samples free in freight collected. For special samples requirement, please contact us for more details.
Q2: How could I pay?
A2: We prefer T/T or L/C at sight. If you prefer other payment terms, please contact us freely.
Q3: What is your brand and packing way? Can you produce my brand and packing?
A3: Our brand is SGC and our own packing materials. We can make your brand. For more details, please contact us.
Q4: What is the delivery lead time?
A4: It depends on the order quantities. The mass production lead time is about 45-60 days after receipt of the deposit.
Q5: Are you manufacturer or trading company?
A5: We are manufacturer and exporter. We provide all kinds of OEM services for clients around the world.
Q6: Where is your main market?
A6: We export to the North America, Mexico, Australia, South-east Asia, Europe, U.A.E., Turkey, and other countries.
Our Services
1. Professional QC and QA team to make sure all products qualified before shipping.
2. Competitive price.
3 .Standard package to ensure the safe transportation.
4. Professional service.
Why choose us?
1. Production
Qualified production, competitive price, professional service.
2. Quality
All products are inspected 100% before shipment by relative testing equipments.
| Series | Size | Types | Features | |||||
| H (Square) | L (Square) | W (Flange) | High Torque | Scraper | High Dust Protect | Low Noise | ||
| Heavy Load & Quieter | 15 Series | ○ | ○ | ○ | ○ | |||
| 20 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 25 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 30 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| 35 Series | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
| Quieter | 35 Series | ○ | ○ | ○ | ○ | |||
| 45 Series | ○ | ○ | ○ | ○ | ||||
| 55 Series | ○ | ○ | ○ | ○ | ||||
| General | 15 Series | ○ | ○ | ○ | ||||
| 20 Series | ○ | ○ | ○ | |||||
| 25 Series | ○ | ○ | ○ | |||||
| 30 Series | ○ | ○ | ○ | |||||
2. General Information
SGS Linear Guideway can be classified into non-interchangeable and interchangeable types. The sizes are identical. The main difference is that the interchangeable blocks and rails can be freely exchanged. Because of dimensional control, the interchangeable type linear guideway is a perfect choice for the client when rails do not need to be paired for an axis; For high precision grades consider ordering a matched, non-interchangeable, assembly of a block and rail.
The advantages of non-interchangeable types against interchangeable types:
1). Since the blocks and the rails are produced separately, they're installed under the general standard. In this case, the over loose or over tighten is still existed even the client installs the interchangeable linear guideway following a recommended installation procedure.
2). If the blocks and rails installed in our company, we will achieve highly accurate linear motion.
3). If the linear guideway is installed by un-skilled staffs, the balls are easily taken off.
4). If accompanied with a ballscrew, pre-load requirement, and achieve for ≤0.05mm accuracy, we suggest to choose non-interchangeable linear guideway.
Grinding or Milling Height:
1). The tolerance of non-grinding: ±0.1mm(General Standard)
2). The tolerance after Grinding: 0~0.03mm(General Standard)
Remarks: If accompanied with a ballscrew, pre-load requirement, and achieve for ≤0.05mm accuracy, we suggest to grind or mill height.
3. Dimensions for SGC ZT/ZQ Series
3.1. ZTH/ZTL High Rigidity
| Model No. | Dimensions of Assembly (mm) | Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
| H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
| ZTH15 | 28 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.21 | 18.53 |
| ZTL15 | 24 | 3 | 9.5 | 34 | 26 | 26 | 39.2 | 58.2 | M4x5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 7.82 | 9.64 |
| ZTH20 | 30 | 3.7 | 12 | 44 | 32 | 36 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 24.23 | 31.28 |
| ZTL20 | 28 | 3.7 | 12 | 44 | 32 | 32 | 52.5 | 74.5 | M5x6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 12.84 | 16.58 |
| ZTH25 | 40 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.24 | 44.31 |
| ZTL25 | 33 | 4.5 | 12.5 | 48 | 35 | 35 | 61 | 85 | M6x8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 19.38 | 23.04 |
| ZTH30 | 45 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.53 | 56.24 |
| ZTL30 | 42 | 7 | 16 | 60 | 40 | 40 | 69 | 97 | M8x10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 27.92 | 33.74 |
| ZTH35 | 55 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.22 | 80.3 |
| ZTL35 | 48 | 7.6 | 18 | 70 | 50 | 50 | 79 | 109 | M8x12 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 39.79 | 52.2 |
3.2. ZTW High Rigidity
| Model No. | Dimensions of Assembly (mm) | Dimensions of Block(mm) | Dimensions of Rail(mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
| H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
| ZTW15 | 24 | 3 | 16 | 47 | 38 | 30 | 39.2 | 58.2 | M5 | 15 | 14.9 | 7.5 | 5.3 | 4.5 | 60 | 20 | 14.23 | 18.35 |
| ZTW20 | 30 | 3.7 | 22 | 63 | 53 | 40 | 52.5 | 74.5 | M6 | 20 | 20 | 9.5 | 8.5 | 6 | 60 | 20 | 23.96 | 30.87 |
| ZTW25 | 36 | 4.5 | 23.5 | 70 | 57 | 45 | 61 | 85 | M8 | 23 | 23 | 11 | 9 | 7 | 60 | 20 | 35.33 | 44.34 |
| ZTW30 | 42 | 7 | 31 | 90 | 72 | 52 | 69 | 97 | M10 | 28 | 28.4 | 14 | 12 | 9 | 80 | 20 | 46.25 | 55.91 |
| ZTW35 | 48 | 7.6 | 33 | 100 | 82 | 62 | 79 | 109 | M10 | 34 | 31.9 | 14 | 12 | 9 | 80 | 20 | 61.32 | 80.57 |
3.3. ZQH/ZQL High Dust Protection
| Model No. | Dimensions of Assembly (mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
| H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
| ZQH35 | 55 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 62.3 | 140.1 |
| ZQL35 | 48 | 7.5 | 18 | 70 | 50 | 50 | 79 | 111.2 | M8x12 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 45.48 | 102.27 |
| ZQH45 | 70 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 79.5 | 158.31 |
| ZQL45 | 60 | 9.5 | 20.5 | 86 | 60 | 60 | 97 | 134 | M10x17 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 58.04 | 115.57 |
| ZQH55 | 80 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 118.52 | 228.62 |
| ZQL55 | 70 | 13 | 23.5 | 100 | 75 | 75 | 117.7 | 161.7 | M12x18 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 86.52 | 166.89 |
3.4. ZQW High Dust Protection
| Model No. | Dimensions of Assembly (mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Basic Dynamic Load | Basic Static Load | |||||||||||||
| H | E | W2 | W | B | J | L1 | L | M x l | W1 | H1 | D | h | d | F | G | Cdyn [KN] | C0 (KN) | |
| ZQW35 | 48 | 7.5 | 33 | 100 | 82 | 62 | 79 | 111.2 | M10 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | 74.32 | 96.35 |
| ZQW45 | 60 | 9.5 | 37.5 | 120 | 100 | 80 | 97 | 134 | M12 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | 104.72 | 210.51 |
| ZQW55 | 70 | 13 | 43.5 | 140 | 116 | 95 | 117.7 | 161.7 | M14 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | 154.49 | 307.54 |
4. Dimensions for SGC HG & EG Series
4.1 HGH-CA / HGH-HA
| Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | ||||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
| HGH 15CA | 28 | 4.3 | 9.5 | 34 | 26 | 4 | 26 | 39.4 | 61.4 | 5.3 | M4x5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
| HGH 20CA | 30 | 4.6 | 12 | 44 | 32 | 6 | 36 | 50.5 | 77.5 | 12 | M5x6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
| HGH 20HA | 50 | 65.2 | 92.2 | |||||||||||||||||
| HGH 25CA | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 58 | 84 | 12 | M6x8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
| HGH 25HA | 50 | 78.6 | 104.6 | |||||||||||||||||
| HGH 30CA | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 70 | 97.4 | 12 | M8x10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
| HGH 30HA | 60 | 93 | 120.4 | |||||||||||||||||
| HGH 35CA | 55 | 7.5 | 18 | 70 | 50 | 10 | 50 | 80 | 112.4 | 12 | M8x12 | 10.2 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
| HGH 35HA | 72 | 105.8 | 138.2 | |||||||||||||||||
| HGH 45CA | 70 | 9.5 | 20.5 | 86 | 60 | 13 | 60 | 97 | 139.4 | 12.9 | M10x17 | 16 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
| HGH 45HA | 80 | 128.8 | 171.2 | |||||||||||||||||
| HGH 55CA | 80 | 13 | 23.5 | 100 | 75 | 12.5 | 75 | 117.7 | 166.7 | 12.9 | M12x18 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
| HGH 55HA | 95 | 155.8 | 204.8 | |||||||||||||||||
| HGH 65CA | 90 | 15 | 31.5 | 126 | 76 | 25 | 70 | 144.2 | 200.2 | 12.9 | M16x20 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
4.2. HGW-CA / HGW-HA
| Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting bolt | ||||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | G | M | T | WR | HR | D | h | d | P | E | (mm) | |
| HGW 15CA | 24 | 4.3 | 16 | 47 | 38 | 4.5 | 30 | 39.4 | 61.4 | 5.3 | M5 | 6 | 15 | 15 | 7.5 | 5.3 | 4.5 | 60 | 20 | M4x16 |
| HGW 20CA | 30 | 4.6 | 21.5 | 63 | 53 | 5 | 40 | 50.5 | 77.5 | 12 | M6 | 8 | 20 | 17.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
| HGW 20HA | 65.2 | 92.2 | ||||||||||||||||||
| HGW 25CA | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 58 | 84 | 12 | M8 | 8 | 23 | 22 | 11 | 9 | 7 | 60 | 20 | M6x20 |
| HGW 25HA | 78.6 | 104.6 | ||||||||||||||||||
| HGW 30CA | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 70 | 97.4 | 12 | M10 | 8.5 | 28 | 26 | 14 | 12 | 9 | 80 | 20 | M8x25 |
| HGW 30HA | 93 | 120.4 | ||||||||||||||||||
| HGW 35CA | 48 | 7.5 | 33 | 100 | 82 | 9 | 62 | 80 | 112.4 | 12 | M10 | 10.1 | 34 | 29 | 14 | 12 | 9 | 80 | 20 | M8x25 |
| HGW 35HA | 105.8 | 138.2 | ||||||||||||||||||
| HGW 45CA | 60 | 9.5 | 37.5 | 120 | 100 | 10 | 80 | 97 | 139.4 | 12.9 | M12 | 15.1 | 45 | 38 | 20 | 17 | 14 | 105 | 22.5 | M12x35 |
| HGW 45HA | 128.8 | 171.2 | ||||||||||||||||||
| HGW 55CA | 70 | 13 | 43.5 | 140 | 116 | 12 | 95 | 117.7 | 166.7 | 12.9 | M14 | 17.5 | 53 | 44 | 23 | 20 | 16 | 120 | 30 | M14x45 |
| HGW 55HA | 155.8 | 204.8 | ||||||||||||||||||
| HGW 65CA | 90 | 15 | 53.5 | 170 | 142 | 14 | 110 | 144.2 | 200.2 | 12.9 | M16 | 25 | 63 | 53 | 26 | 22 | 18 | 150 | 35 | M16x50 |
4.3. EGH-SA / EGH-CA
| Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
| EGH15SA | 24 | 4.5 | 9.5 | 34 | 26 | 4 | - | 23.1 | 40.1 | 14.8 | 5.7 | M4x6 | 6 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
| EGH15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
| EGH20SA | 28 | 6 | 11 | 42 | 32 | 5 | - | 29 | 50 | 18.75 | 12 | M5x7 | 7.5 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
| EGH20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
| EGH25SA | 33 | 7 | 12.5 | 48 | 35 | 6.5 | - | 35.5 | 59.1 | 21.9 | 12 | M6x9 | 8 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
| EGH25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
| EGH30SA | 42 | 10 | 16 | 60 | 40 | 10 | - | 41.5 | 69.5 | 26.75 | 12 | M8x12 | 9 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
4.4. EGW-SA / EGW-CA
| Model No. | Dimensions of Assembly(mm) | Dimensions of Block (mm) | Dimensions of Rail (mm) | Mounting Bolt | |||||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | K1 | G | Mxl | T | WR | HR | D | h | d | P | E | (mm) | |
| EGW 15SA | 24 | 4.5 | 18.5 | 52 | 41 | 5.5 | - | 23.1 | 40.1 | 14.8 | 5.7 | M5 | 5 | 15 | 12.5 | 6 | 4.5 | 3.5 | 60 | 20 | M4x16 |
| EGW 15CA | 26 | 39.8 | 56.8 | 10.15 | |||||||||||||||||
| EGW 20SA | 28 | 6 | 19.5 | 59 | 49 | 5 | - | 29 | 50 | 18.75 | 12 | M6 | 7 | 20 | 15.5 | 9.5 | 8.5 | 6 | 60 | 20 | M5x16 |
| EGW 20CA | 32 | 48.1 | 69.1 | 12.3 | |||||||||||||||||
| EGW 25SA | 33 | 7 | 25 | 73 | 60 | 6.5 | - | 35.5 | 59.1 | 21.9 | 12 | M8 | 7.5 | 23 | 18 | 11 | 9 | 7 | 60 | 20 | M6x20 |
| EGW 25CA | 35 | 59 | 82.6 | 16.15 | |||||||||||||||||
| EGW 30SA | 42 | 10 | 31 | 90 | 72 | 9 | - | 41.5 | 69.5 | 26.75 | 12 | M10 | 7 | 28 | 23 | 11 | 9 | 7 | 80 | 20 | M6x25 |
5. Applications:
5.1. ZT Series- CNC machining centres, Heavy duty cutting machines, CNC grinding machines, Injection molding machines, Electric discharge machines, Wire cutting machines, Plano millers.
5.2. ZQ Series- Precision measure equipments, Semiconductor equipments, Automatic equipments, Laser marking machines, and in high-tech industry required high speed, low noise, low dust generation.
5.3. HG Series- Grinding, Milling, and drilling machines, lathe, machine centre.
5.4. EG Series- Automatic equipments, High speed transfer device, Semiconductor equipments, Wood cutting machines, Precision measure equipments.
Q1: Can I get a free sample?
A1: We provide samples free in freight collected. For special samples requirement, please contact us for more details.
Q2: How could I pay?
A2: We prefer T/T or L/C at sight. If you prefer other payment terms, please contact us freely.
Q3: What is your brand and packing way? Can you produce my brand and packing?
A3: Our brand is SGC and our own packing materials. We can make your brand. For more details, please contact us.
Q4: What is the delivery lead time?
A4: It depends on the order quantities. The mass production lead time is about 45-60 days after receipt of the deposit.
Q5: Are you manufacturer or trading company?
A5: We are manufacturer and exporter. We provide all kinds of OEM services for clients around the world.
Q6: Where is your main market?
A6: We export to the North America, Mexico, Australia, South-east Asia, Europe, U.A.E., Turkey, and other countries.
Our Services
1. Professional QC and QA team to make sure all products qualified before shipping.
2. Competitive price.
3 .Standard package to ensure the safe transportation.
4. Professional service.
Why choose us?
1. Production
Qualified production, competitive price, professional service.
2. Quality
All products are inspected 100% before shipment by relative testing equipments.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine