Products

Orthopedic Electric Drill Cast Plaster Cutter Saw

China Orthopedic Electric Drill Cast Plaster Cutter Saw, Find details about China Electric Cast Saw, Surgical Cast Saw from Orthopedic Electric Drill Cast Plaster Cutter Saw

Model NO.
AXS-I Electric Plaster Saw
Logo Printing
With Logo Printing
Usage
Cut Plaster of Paris Bandage and Casting Tape
Color
Red; Green
Packing
Free of Aluminum Box
Trademark
Ansen/OEM
Transport Package
Paper Carton
Specification
64x41x42cm
Origin
China
HS Code
9018909010
Model NO.
AXS-I Electric Plaster Saw
Logo Printing
With Logo Printing
Usage
Cut Plaster of Paris Bandage and Casting Tape
Color
Red; Green
Packing
Free of Aluminum Box
Trademark
Ansen/OEM
Transport Package
Paper Carton
Specification
64x41x42cm
Origin
China
HS Code
9018909010

Orthopedic Electric Drill Cast Plaster Cutter SawContact:
Bruce Yang

Product Description

 

Electric plaster saw is the new generation product designed and researched according to the clinical operation experience. The motor adopts double insulation protection device and guarantees the safety of operators and the wounded. The product features

strong motive power, smart design, stable operation, small vibration, low noise, safety and reliability.
1. Motor x1
2. Aluminum alloy box x1
3. L Wrench x1
4. Manual in English x1
5. Saw blades x3
 
 
Product Features
1. For application in removing all kinds of orthopedic bandage.
2. High-speed saw blade vibration system.
3. Adopt import motor, powerful, quickly cutting and reliable.
4. High efficiency and safety during operation.

Technical Parameter
Power Valtage110 V / 60 Hz or 220 V / 50 Hz
Maximum Swing Times
12750-17250 times/min
Whole machine weight
575g
Overall dimensions
260*60*53mm
Componentone mainframe; three types saw blades; one aluminium alloy box
Notes for Medical Electric Plaster Saw
1. The main engine and electric wire are forbidden to be dipped in disinfectant for disinfection or high temperature disinfection.
2. Clean the surface with soft cotton cloth and neutral soap solution after use. Organic solvent and hard materials are for bidden.
3. The saw shall be stored in ventilated and dry environments instead of places higher than 40ºC. Lay it into the box and avoid collision and impact during transportation.
4. Generally speaking, stop use if output frequency reduction, impotent output or high noise appears during operation, or it will damage the motor or even hurt the operators.
5. If the saw hasn't been applied for a long time or it is applied in damp environment, the insulation resistance between the machine cover and winding shall be measured with a 50ohm meter. If it is less than 7ohm, drying treatment shall be done to the winding until the insulated resistance is above 7ohm.
Certificated Approved Medical Gypsum Cutting Electric Plaster Saw
Medical Plaster Cutting Saw
Quantity
hand piece
1
saw blades
Round 65mm dia. Blade
Round 42mm dia. Blade
Universal Plaster Cutting Blade
aluminum alloy case
1
Spanner
1
manual
1
Operation

 

1). Remove the main unit, spanner and saw blades from the case.
2). Use the spanner to unscrew the blade holder
3). Once the blade holder is loose remove it from the unit 4). Place your chosen blade on the drive shaft
5). Tighten the blade holder back onto the unit
6). Secure the blade into place using the spanner
7). The saw is now assembled ready for use. When finished, simply repeat these steps.
Speed Setting Function Orthopedic Aluminum Alloy plaster cutting saw blades Electric Plaster SawOrthopedic Electric Drill Cast Plaster Cutter Saw
After-sales Service Commitment

The saw can be repaired freely within half a year of quality problems occur.

 

Besides, it adopts one-year guarantee period.

 

During the guarantee period, only the material will be charged.
 

Packaging & Shipping


Orthopedic Electric Drill Cast Plaster Cutter Saw

Certifications

 

Orthopedic Electric Drill Cast Plaster Cutter Saw
Company Profile

Shaanxi Ansen Medical Technology Development Co., Ltd is one of leading medical consumable manufacturer in China with more than15years history.Dec 5,2007,Ansen first production line was successfully installed and pilot run.After two years of fast development,Ansen had about 200 distributors in China involving about 2,166 hospitals and extended business to foreign area such as Europe, USA , Asia, etc.In 2010, Ansen Orthopedic casting tape was successfully registered in Indian Medical Device Organization.

 
Orthopedic Electric Drill Cast Plaster Cutter Saw

 

 
 

You Might Also Like