Products

N Male Termination/Load, 5W, 18g

China N Male Termination/Load, 5W, 18g, Find details about China N Male Termination, N-Type Connector from N Male Termination/Load, 5W, 18g

Model NO.
N-J
Mounting Type
Na
Insulating Materials
Teflon
Contact Finish
Silver
Materials
Stainless Steel
Standard
IEC61169
Trademark
EZCON
Transport Package
Bagged
Origin
China
Model NO.
N-J
Mounting Type
Na
Insulating Materials
Teflon
Contact Finish
Silver
Materials
Stainless Steel
Standard
IEC61169
Trademark
EZCON
Transport Package
Bagged
Origin
China
Package size per unit product
4.00cm * 2.00cm * 2.00cm
Gross weight per unit product
0.050kg
SPECIFICATIONS()
Electrical()
Frequency Range() DC-18 GHz
VSWR()1.25:1 Max.
Input Power()5 Watts Avg.
Impedance()50 Ohms 
Operating Temp Range(Temp Range)(-)65°C to +125°C
Mechanical()
Insulation()Teflon()
Body Passivated Stainless Steel()
Coupling Nut()Passivated Stainless Steel()
HousingBlack Anodized Aluminum Heatsink()
RF Terminations Technical Data Sheet PE6097

Features

• DC to 18 GHz Frequency Range • Max Power 5 Watt (CW)

• VSWR 1.25:1 Max • N Male Coaxial Interface

Applications

• Wireless • Radar Systems • Commercial and Military

• SatCom • Test and Measurement Communication

.

Description

Pasternack's PE6097 is an RF termination (also called RF load or dummy load) that operates from DC to 18 GHz and handles up to 5 Watt (CW). Our N termination / load has a male gender. PE6097 N load termination offers 1.25:1 max VSWR. This Pasternack 5W N terminator has a heatsink body which is designed to provide adequate heat dissipation within its full frequency of operation.

RF load / terminations are indispensable components in many RF, microwave and millimeter wave systems where signal reflection from unused ports can potentially damage the device or reduce the signal integrity. By using a terminator on an unused port with a matched load (dummy load), the incident energy will be absorbed with minimal reflection. These termination components are commonly used to terminate devices such as couplers, circulators, and switches. They are also widely used in measurement systems to ensure accurate results. Pasternack offers a huge selection of RF, microwave and millimeter wave terminations up to 65 GHz with excellent performance over the entire operating range and power handling capabilities up to 800 Watt (CW).

Electrical Specifications
 
DescriptionMinimumTypicalMaximumUnits 
Frequency RangeDC 18GHz 
      
Impedance 50 Ohms 
      
VSWR  1.25:1  
      
Input Power (CW)  5Watts 
derated linearly to 1W at +125°C     
      
.     

Mechanical Specifications

Size

Length 1.15 in [29.21 mm]
Width 0.8 in [20.32 mm]
.

Weight 0.075 lbs [34.02 g]
.

Configuration

Connector N Male

Connector Specification MIL-STD-348
 
Company Show

EZCON is a product and solution provider, the company provides high quality, high performance, and low-cost cable assembly/connector products. EZCON engages in R&D, for telecom and electronics products with a focus on RF cable assemblies/connectors, high speed interconnect cable assemblies/connectors, and high-end test/calibration products. The company has the capacity of product design, engineering service, low-cost production/sourcing, assembly, and testing. EZCON combines the advantages of low-cost production in China with a high level of engineering expertise, service, and quality.


Our Customers
N Male Termination/Load, 5W, 18g

Company Products and Technologies

N Male Termination/Load, 5W, 18g
N Male Termination/Load, 5W, 18g
N Male Termination/Load, 5W, 18g
Customers Testimonials
N Male Termination/Load, 5W, 18g

Main Company Equipments And Production line
N Male Termination/Load, 5W, 18g

Products application sites

N Male Termination/Load, 5W, 18g

Company Certification
N Male Termination/Load, 5W, 18g
N Male Termination/Load, 5W, 18g
FAQ

1.Q: What's your MOQ?

A: 50 pcs

2.Q: What's your delivery time?

A:7-14 days after receiving PO.

3.Q: Does your company do a customized design?

A: Yes, we do OEM and ODM

4.Q: What is your after-sale service program?

A: Please see our service manual for details.

5. Q: Can you send samples to us for the test?

A: Yes, samples can be sent at a cost.


WHY CHOOSE EZCON

1)Sales directly to the customer.

2) First-class performance, highest quality, and life cycle.

3) Fast delivery: 1-2 working days.

4) Customerized Design.

5) Very competitive price.

7) Fast, enthusiastic, thoughtful, caring, and excellent service.

8) Quick response(replying within 30 minutes of receiving the request).


Our service

1. Email reply within 24 hours.

2. One-stop solution for electronic components, service, and manufacturing.

3. Each piece must pass the precision test.

4.Quality after-sales service.

You Might Also Like