China Scooptram Similar as Wanger St1, Find details about China Hydrostatic Loader, Scoops from Scooptram Similar as Wanger St1
CAPACITIES | |
Standard bucket | 0.6~0.75cbm |
Tramming capacity | 1.2 kg |
Max. Break out force | 28kN |
Max. Tractive force | 40kN |
Grade ability | Max. 15°/26% |
BUCKET MOTION TIMES | |
Raising time | 6.5 sec |
Lowering time | 4.3 sec |
Dumping time | 3.0 sec |
OPERATING WEIGHTS | ||
Total operating weight | 6,750 kg | |
Front axle with load | 3750kg | |
Rear axle with load | 3000 kg | |
MAIN DIMENSIONS | ||
Total length | 5000 mm | |
Max. width | 1100mm | |
Height, including canopy | 1850 mm | |
Ground clearance | 145 mm |
SPEEDS FORWARD & REVERSE (LEVEL / LOADED) | |
0 to 15.5 km/h (9.6 m.p.h) | |
TURNING RADIUS | |
Turning angle | ±42.5° |
Inner | 2030mm |
Outer | 3450 mm |
ENGINE | |
Diesel engine | DEUTZ D914 or DL4 or BF4L2011 |
Output | 57 kW / 2300 rpm |
Torque | 229 Nm / 1550 rpm |
Number of cylinders | In-line 5 |
Displacement | 4.7 L |
Cooling system | Air cooled |
Air filtration | Dry type/Wet |
Exhaust system | ECS platinum catalytic purifier and muffer |
Fuel Tank Capacity | 108L |
Transfer case | |
TransferBox | Gear drive 2.39:1 with Park brake |
TRANSMISSION | |
V50+M50 Linder Hydraulic Germany | Hydrostatic transmission F/R( Donfoss configuration ) |
AXLES | |
Front axle | XCMT CY10, standard differential, fixed |
Rear axle | XGMT CY10, standard differential, Oscillating±8° |
TIRES | |
Tires size | 9.00 x 20, 18PLY |
LINGLONG for L4S, pressure 517 kPa |
OPERATOR'S COMPARTMENT | |
Open canopy | ROPS/FOPS |
Tramming | Pilot control |
Operating | Pilot control |
Lubrication | Semi-Central lubrication |
Safety devices | |
Boom locking device, Fire extingwisher, |
ELECTRICAL SYSTEM | |
Working voltage | 24 V |
Batteries | 2 x 12V, 950 CCA |
Alternator | 28V, 35A |
Starter | 24 V heavy duty |
Working lights | 2 front, 2 rear |
BUCKET HYDRAULICS | |
Full hydraulic open-center system with one gear pump. Equipped with electro/mechanical control lever, two lift cylinders and one dump cylinder. | |
Main components | |
Lift cylinders | WT x (150X390 mm) |
Dump cylinders | WT x (125x585mm) |
Hydraulic pump | Gear pump |
Control valve | Electro/ mechanical |
Bucket & steering pump | Parker, gear pump |
Pressure Settings | |
Main relief | 14 MPa |
Bucket dump | 14 MPa |
Bucket roll back | 14 MPa |
Raise/lower arms | 14MPa |
Hydraulic oil tank capacity | Approx. 90L for bucket +60L for hydrostatic |
STEERING HYDRAULICS | |
Closed center, fixed displacement gear. One double acting steer cylinder equipped with electro/mechanical control lever | |
Main components | |
Hydraulic pump | Gear pump |
Control valve | Orbital steer wheel |
Steering hydraulic cylinders | WT Hydro(80 mm x 258) |
Pressure Settings | |
Main relief | 15.2 MPa |
Port relief valve | 17.2 MPa |
BRAKES | |
Dynamic service braking through the hydrostatic transmission. Parking brake is a spring applied, hydraulically released dry disc brake mounted on the tramsfer case | |
Main components | |
Spring applied hydraulic release on the gear box |
Customer | |
3 spare parts manuals | English |
3 Operator manuals | English |