Wedge wire filter nozzles are made from V-shaped profile wire, which is spirally wound around a cage of longitudinal
support rods. Each intersecting point of these wires is fusion welded, with a unique welding process. This spacing
gives passage for water to enter. The entire process is completed on fully computerized machines. The pitch of winding
gives different spacing between two adjacent turns of wire.

The Details of Single and Double Flow Rating Filter Nozzle:
Single and Double Flow Rating Filter Nozzle is composed of V-profile wire stainless steel which is spirally wrapped in a
certain equal slot. To maintain the slot size around inside and add extra strength are mounted. It has each cover for both
ends of the nozzle. Each wire and rod are made by spot welding. and fitting pipe is adjusted according to the thickness
of the set bottom plate. The nozzle is completed by welding fitting pipe to a cover of down end after setting screw
according to the type of nut.

Advantage of Wedge wire filter nozzle:
1) Material: 304, 304L, 316, 316L, 2507, Hastelloy, etc as your requirements.
2) Continuous slot design provides a large circulation area
3) The standard nozzle is 2in/51mm diameter and can be attached to the plate either with threaded end fittings or "L" blots.
4) Standard slot opening is typically range between 0.006"(0.15mm), and 0.020in./0.50mm wide suitable for 40 to 50 mesh
size media, Other slot sizes are also available.
5) The wedge wire screen is highly resistant to plugging.
6) Unaffected by temperature, corrosion-resistant, aging resistant, long life span, easy change, safety, and environmentally friendly.
7)Widely used in water softening treatment equipment, breweries Filtration, Sizing and separation, Fluid bed dryers or
coolers, Washing, etc.

Specification of Johnson Single and Double Flow Rating Filter Nozzle: