Placer / Alluvial Gold Washing Centrifugal Concentrator Plant
China Placer / Alluvial Gold Washing Centrifugal Concentrator Plant, Find details about China Centrifugal Separator, Gold Centrifuge from Placer / Alluvial Gold Washing Centrifugal Concentrator Plant
Basic Info.
Model NO.
LX19/LX25/LX30/LX60
Warranty
1 Year
Color
Multi, Selectable
Customized
Customized
Condition
New
Function
Gold Recovery
Drive Mode
Electric Motor or Diesel Engine
Power
Multiple Power
Installation
Indoor and outdoor
Application
Alluvial Placer Hard Rock
Field
Gold Mining
Method
Mercury Free
Capacity
1-55 TPH
Power Frequency
50Hz, 60Hz
Gold Recovery Rate
98%
Processed Raw Materials
Placer, Alluvial/Eluvial, Hark Rock, Tailings
Mounted Type
Fixed, Modular, Mobile
Customization
Acceptable
Trademark
HZE
Transport Package
Containerized
Specification
LX19/LX25/LX30/LX60
Origin
China
HS Code
8474100000
Model NO.
LX19/LX25/LX30/LX60
Warranty
1 Year
Color
Multi, Selectable
Customized
Customized
Condition
New
Function
Gold Recovery
Drive Mode
Electric Motor or Diesel Engine
Power
Multiple Power
Installation
Indoor and outdoor
Application
Alluvial Placer Hard Rock
Field
Gold Mining
Method
Mercury Free
Capacity
1-55 TPH
Power Frequency
50Hz, 60Hz
Gold Recovery Rate
98%
Processed Raw Materials
Placer, Alluvial/Eluvial, Hark Rock, Tailings
Mounted Type
Fixed, Modular, Mobile
Customization
Acceptable
Trademark
HZE
Transport Package
Containerized
Specification
LX19/LX25/LX30/LX60
Origin
China
HS Code
8474100000
Product Desciption
Placer / Alluvial Gold Washing Centrifugal Concentrator Plant
Centrifugal concentrator (centrifugal separator) is a kind of high efficiency gravity concentrating equipment. High-speed rotation generates very strong centrifugal force to intensify gravity separation which makes more effective recovery of the fine heavies.
The above picture shows the working principle. The separating part of the centrifugal concentrator is a frustum consisting of a outer shell and inner wall. The outer shell and inner wall construct a closed water chamber. The inner wall is named as the enriching cone which has a series of parallel annular groove and lots of small flushing water holes (fluidization holes).
During the enriching cone rotates, the strong centrifugal force will greatly enlarge the gravity difference of minerals, so a good separation effect can be obtained. Slurry is fed onto the bottom of the enriching cone through the centre well, the light particles and water move upward along the inner surface of the enriching cone and are discharged out of the cone as tailings. The heavy particles are captured in a series of riffles (grooves) as concentrate. Due to continuous flushing water enters inside of the inner wall of the enriching cone though the small holes, the heavy minerals bed is fluidized. Under the interaction of fluidization water and interference settlement, heavy minerals bed can be kept loose continuously.
The working mode of centrifugal concentrator is semi continuous. After the enriching cone works for a period of time, the concentrate is unloaded out of the grooves by rinsing water and flows down out of the bottom of the enriching cone.
The centrifugal concentrators are divided into three product categories: basic type (BLX), semi-automatic type (SLX) and automatic type (ALX) to meet the demands of different customers. All of them can achieve the optimal gold recovery target.
Environmental friendly gold recovery equipment without mercury and other chemicals.
The rotation speed of the enriching cone can be adjusted by VFD to achieve the optimal running effect.
Excellent recovery performance of granular gold. The recovery of 74 microns granular gold is more than 98% and that of 40 microns is more than 97%.
The enrichment ratio is more than 1000, the concentrate yield is small, and the concentrate grade is up to 1000-20000 g/t.
The enriching cone is equipped with high wear-resistant polyurethane core, which has extremely long service life and stable continuous operation rate.
The three types are freely selected by the customers according to the actual requirement. The automatic centrifugal concentrator can reduce the labor intensity, and is easy to maintain and operate.
The high-grade concentrate produced can be used for smelting mixed borax after further enrichment on the concentration table, or also be sent to intensive leaching and electrowinning.
The centrifugal concentrator can be installed in the indoor or outdoor to be operated without any trouble affected by the environment and geographical conditions. It can be used to recover coarse and fine gold in single gravity concentration system, milling system before flotation or cyanide leaching, tailings recovery system, alluvial / placer gold washing system, concentrate enrichment system.
It can also be installed on the trailer to make a mobile concentrator, or combines with pumps, vibrating screen, ball mill and other equipment to form a skid mounted modular processing plant.
FAQ
1.What is the main business scope of your company?
HZE is a company with R&D center, design institute, manufacturing factories, installation and commissioning teams.Our customers are in the mining and mineral processing fields.Our major businesses include mineral processing EPC (engineering, procurement and construction), project consultation, engineering design, mineral processing equipment manufacturing, on-site installation, commissioning, staff training, customer project operation management, spare parts supply and technical support.Customers are free to choose any one or any combination of our services.
2.What are the outstanding advantages of your company?
The one-stop service of mineral processing engineering project and equipment is our core competitiveness.
The most important feature that HZE distinguishes itself from other engineering companies, design companies or consulting companies is that we are also an equipment manufacturer with a production plant of 50,000 square meters, and we have complete manufacturing rout and the related equipment.
HZE distinguishes itself from other equipment manufacturers by owning its own R&D center and engineering design institute.
HZE distinguishes itself from many mining machinery enterprises by possessing an expert team with members including not only senior engineers of the company, but also top Chinese technical experts, university professors and researchers.
3.What are the characteristics of your company's 3D design?
HZE not only uses 3D software to design equipment, but also uses 3D software to design process flow, pipeline, steel structure, auxiliary facilities, etc.Of the whole mineral processing project.We even use 3D design for equipment packaging, container packing and equipment instructions manual.This greatly improves the quality of equipment and engineering, shortens the construction period, facilitates technical discussion and evaluation, facilitates project management, improves construction safety and reduces project cost.
4.What are the service features of your company?
Centrifugal concentrator (centrifugal separator) is a kind of high efficiency gravity concentrating equipment. High-speed rotation generates very strong centrifugal force to intensify gravity separation which makes more effective recovery of the fine heavies.
The above picture shows the working principle. The separating part of the centrifugal concentrator is a frustum consisting of a outer shell and inner wall. The outer shell and inner wall construct a closed water chamber. The inner wall is named as the enriching cone which has a series of parallel annular groove and lots of small flushing water holes (fluidization holes).
During the enriching cone rotates, the strong centrifugal force will greatly enlarge the gravity difference of minerals, so a good separation effect can be obtained. Slurry is fed onto the bottom of the enriching cone through the centre well, the light particles and water move upward along the inner surface of the enriching cone and are discharged out of the cone as tailings. The heavy particles are captured in a series of riffles (grooves) as concentrate. Due to continuous flushing water enters inside of the inner wall of the enriching cone though the small holes, the heavy minerals bed is fluidized. Under the interaction of fluidization water and interference settlement, heavy minerals bed can be kept loose continuously.
The working mode of centrifugal concentrator is semi continuous. After the enriching cone works for a period of time, the concentrate is unloaded out of the grooves by rinsing water and flows down out of the bottom of the enriching cone.
The centrifugal concentrators are divided into three product categories: basic type (BLX), semi-automatic type (SLX) and automatic type (ALX) to meet the demands of different customers. All of them can achieve the optimal gold recovery target.
| Type | Basic (BLX) | Semi Automatic (SLX) | Automatic (ALX) |
| Materialof Enriching Cone | Stainless Steel | Stainless Steel Shell + Polyurethane Core | |
| Flushing Water | Radial Entry More Consumption | Oblique Entry Less Consumption | |
| Automation | Null | Semi Automation Long Time to discharge Concentrate | Unattended |
| Gs | 60-90 Adjusted | 60-90 Adjusted | 60-120 Adjusted |
| Fault Detection | Null | Partial | Multi Points Detection and Fault Alarm |
| Applications | Granular Gold | Granular, Micro Fine and Wrapped Gold | |
Environmental friendly gold recovery equipment without mercury and other chemicals.
The rotation speed of the enriching cone can be adjusted by VFD to achieve the optimal running effect.
Excellent recovery performance of granular gold. The recovery of 74 microns granular gold is more than 98% and that of 40 microns is more than 97%.
The enrichment ratio is more than 1000, the concentrate yield is small, and the concentrate grade is up to 1000-20000 g/t.
The enriching cone is equipped with high wear-resistant polyurethane core, which has extremely long service life and stable continuous operation rate.
The three types are freely selected by the customers according to the actual requirement. The automatic centrifugal concentrator can reduce the labor intensity, and is easy to maintain and operate.
The high-grade concentrate produced can be used for smelting mixed borax after further enrichment on the concentration table, or also be sent to intensive leaching and electrowinning.
The centrifugal concentrator can be installed in the indoor or outdoor to be operated without any trouble affected by the environment and geographical conditions. It can be used to recover coarse and fine gold in single gravity concentration system, milling system before flotation or cyanide leaching, tailings recovery system, alluvial / placer gold washing system, concentrate enrichment system.
It can also be installed on the trailer to make a mobile concentrator, or combines with pumps, vibrating screen, ball mill and other equipment to form a skid mounted modular processing plant.
| Model | BLX20 | BLX30 | BLX60 SLX60 | BLX80 SLX80 | LX100 SLX100 ALX100 |
| Solid Capacity (t/h) | 0.1-0.6 | 2-3 | 8-12 | 15-35 | 30-55 |
| Feed Particle Size (*mm) | 0-3 | 0-3 | 0-5 | 0-5 | 0-6 |
| Solid Concentration of Feed Slurry (W/W, %) | 0-50 | 0-50 | 0-50 | 0-50 | 0-50 |
| Max Slurry Capacity (m3/h) | 4 | 9 | 26 | 88 | 150 |
| Flushing Water Consumption (m3/h) | 1-2 | 3-5 | 7-10 | 20-36 | 30-60 |
| Concentrate Discharge Cycle (Hr) | 1-4 | 1-4 | 1-5 | 1-5 | 1-6 |
| Concentrate Mass per Batch Cycle (kg) | 1.5-2 | 3-5 | 10-20 | 40-50 | 60-80 |
| Power (kW) | 0.75 | 1.5 | 5.5 | 11 | 18.5 |
FAQ
1.What is the main business scope of your company?
HZE is a company with R&D center, design institute, manufacturing factories, installation and commissioning teams.Our customers are in the mining and mineral processing fields.Our major businesses include mineral processing EPC (engineering, procurement and construction), project consultation, engineering design, mineral processing equipment manufacturing, on-site installation, commissioning, staff training, customer project operation management, spare parts supply and technical support.Customers are free to choose any one or any combination of our services.
2.What are the outstanding advantages of your company?
The one-stop service of mineral processing engineering project and equipment is our core competitiveness.
The most important feature that HZE distinguishes itself from other engineering companies, design companies or consulting companies is that we are also an equipment manufacturer with a production plant of 50,000 square meters, and we have complete manufacturing rout and the related equipment.
HZE distinguishes itself from other equipment manufacturers by owning its own R&D center and engineering design institute.
HZE distinguishes itself from many mining machinery enterprises by possessing an expert team with members including not only senior engineers of the company, but also top Chinese technical experts, university professors and researchers.
3.What are the characteristics of your company's 3D design?
HZE not only uses 3D software to design equipment, but also uses 3D software to design process flow, pipeline, steel structure, auxiliary facilities, etc.Of the whole mineral processing project.We even use 3D design for equipment packaging, container packing and equipment instructions manual.This greatly improves the quality of equipment and engineering, shortens the construction period, facilitates technical discussion and evaluation, facilitates project management, improves construction safety and reduces project cost.
4.What are the service features of your company?
- Customers who whether buy our equipment, or entrust us with EPC, or require us to provide a certain service, cooperate closely with us to carry out specific operations and supervise our implementation throughout the process.
- HZE will try to understand the basic situation and needs of customers as detailed as possible before the sale, formulate a preliminary plan according to the specific situation of customers, and get unanimous opinions after communications and discussions with customers to determine the plan.
- We set up customer files for every customer who signed the contract with us and upload them to the Cloud where customers can also get an account and password.Customers can have all the documents, videos and pictures, technology, services, execution, operation, management and control, maintenance and so on related to the business.
- Whether it is in the process of general contracting, equipment manufacturing or providing some kind of service, we welcome customers to know about our implementation on the spot or through the network, and put forward requirements and opinions.
- We assist users who have used our products to formulate operation specifications and make suggestions on maintenance plans and spare parts inventories.In addition to routine on-site installation, commissioning and training, during the production period after we handing over equipment to customers for use, we often understand the equipment using situations through the network and provide guidance and training to customer management and operators.
- For the clients who have just start the mining business, we provide the opportunity of training and practice in China's mines for the clients' employees, until they are skilled in operation and maintenance.
You Might Also Like
10OZ Cotton Polyester Spandex For Jeans
Auto Wiper Motor for Renault Master, 7701050898
Indoor Commercial Trampoline Center for Shopping Mall
Neonpro Series Black White Transparent Straight Type Sleeve ......
Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......
Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......
Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......
New Factory Price High Quality Pin Type Forklift Forks for S......
Natural Birch Wood Double Pointed Sticks
Prefabricated Steel Structure House Project for Logistics Ce......
OEM ODM Customized Home Workout Equipment Resistance Band fo......
Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece