Products

Agriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed Heptamethyltrisiloxane

China Agriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed Heptamethyltrisiloxane, Find details about China Polyether Trisiloxane, Agriculture from Agriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed Heptamethyltrisiloxane

Model NO.
Silway 246D
Trademark
Silway
Transport Package
200L IBC
Origin
China
HS Code
3910000000
Model NO.
Silway 246D
Trademark
Silway
Transport Package
200L IBC
Origin
China
HS Code
3910000000
Description
Silway 246D spray adjuvant is a polyether trisiloxane. In aqueous solutions, it gives super spreading and does dramatically reduce surface tension.

Typically, Silway 246D spray adjuvant reduces the surface tension of aqueous agricultural mixtures significantly. At concentrations as low as 0.1 percent, Silway 246D spray adjuvant reduces surface tension below 22 mN/m, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves.

Silway 246D spray adjuvant is nonionic in nature, making it useful with a broad range of agrochemical formulations.

Typical Applications  
Crop protection products  
Herbicides  
Insecticides  
Fungicides  
Nutrients and plant growth regulators

Key Features  
Superspreading for exceptional spray coverage of crop and plant surfaces  
Up to 70% spray volume reduction to lower water use and application costs  
Excellent penetration providing better pesticide uptake and efficacy  
Better spray treatment adhesion on crop and plant surfaces  
Rainfastness to lower pesticide wash-off and waste  
Lower use levels than non-silicone surfactants  
Nonionic

Typical Physical Properties
PropertyResult
Surface Tension (0.1%, mN/m)20.5
Cloud Point (0.1 wt%, ºC)<10
Viscosity (cSt, 25ºC)28
Specific Gravity (25/25 ºC)1.002

Usage  
Silway 246D spray adjuvant may be used as a component in agrochemical formulations. Although organosilicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to pH 6.5-7.5. Additionally, it is recommended that Silway 246D spray adjuvant be used at a concentration of at least 5%, based on the total formulation.  

Silway 246D spray adjuvant, when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume. Silway 246D spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are used within 12 hours of preparation.

Silway 246D spray adjuvant has been used successfully in spray applications globally. Typical applications include:

Application

Typical Use Rate*

Plant Growth Regulators

0.025% to 0.05%

Herbicide

0.025% to 0.15%

Insecticide

0.025% to 0.1%

Fungicide

0.015% to 0.05%

Fertilizers and Micronutrients

0.015% to 0.1%


* Note: use rates are dependent on crop, agrochemical and spray volume requirements.

Packing
200L or IBC tank

Storage
Being storage in closed containers

Shelf Life
36 months

Agriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed HeptamethyltrisiloxaneAgriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed HeptamethyltrisiloxaneAgriculture Silicone Fluid Spreading Agent Silway 246D Polyalkyl Modifed Heptamethyltrisiloxane

You Might Also Like