Product Description
Product Name Nucleic Acid Isolation & Purification Kit
Product specifications IVD3101,200Preps/Kit
Intended Use
This product is suitable for rapid extraction of RNA from tissue, cells, blood, s and other clinical samples. RNA can be used directly for RT-PCR, quantitative RT-PCR, test of virus DNA and so on.
Principle
This product is based on the purification method of high binding magnetic particles. The sample is lysed and digested under the action of lysate and Protease. DNA is released into the lysate. After adding magnetic particles and binding solution, DNA will be adsorbed on the surface of magnetic particles, and impurities such as proteins will be removed without adsorption. The adsorbed particles were washed with washing solution to remove proteins and impurities, washed with ethanol to remove salts, and finally DNA was eluted by Elution Buffer.
Main CompositionCat.No. | IVD3101 | Composition |
MagBind Particles | 6.6 ml | Magnetic Particles |
Proteinase K | 90 mg | Protease |
Protease Dissolve Buffer | 10 ml | Glycorel/Tris/CaCl2 |
Buffer ATL | 60 ml | Tris/EDTA/SDS |
Buffer AL | 60 ml | Guanidine Salt |
Buffer BD | 20 ml | sodium perchlorate |
Buffer BW1 | 110 ml | Guanidine Salt |
Elution Buffer | 30 ml | Tris/EDTA |
Storage conditions and Validity
This kit is shipped and stored at room temperature and is valid for 12 months.
Materials and Equipment to be Supplied by User1.Add 5ml ml Protease Dissolve Buffer to the Proteinase K, and store at -20~8ºC after dissolve
2.Add 2.5ml Protease Dissolve Buffer to the RNase A, and store at -20~8ºC after dissolve
3.Dilute Buffer GW1with 140ml 100% ethanol and store at room temperature
4.Dilute Buffer BD with 80ml 100% ethanol and store at room temperature
5.Prepare 75% Ethanol using Absolute Ethanol and store at room temperature.
Auto Purify by KingFisher Flex:1.Add the Reagents/sample to the well of f the deep well plate according to the table below.Name of the Plate | Pre-loaded reagents | Addition before use |
Sample plate | 400µl Buffer BD, 20µl MagBind Particle | 400µl Lysis Sample or Supernatant |
Wash Plate 1 | 500µl Buffer GW1, Put in 96 magnetic Tip |
Wash Plate 2 | 500µl 75% ethanol |
Wash Plate 3 | 500µl 75% ethanol |
Elution plate | 100µl Elution Buffer |
2.Turn on the machine, start the corresponding program(IVD3101_F_96CE).
3.Place the 96-well plate into the instrument as prompted.
4.Finish the operation after ~30 minutes.
5.Remove the 96-well plate and magnetic jacket.
6.Store the Elute product at -20~8ºC. Detailed Photos
Certifications
Laboratory
Workshop
Fininshed product area