Automatic Hydraulic Self-Cleaning Screen Filters

China Automatic Hydraulic Self-Cleaning Screen Filters, Find details about China Water Filter, Cartridge Filter from Automatic Hydraulic Self-Cleaning Screen Filters

Model NO.
YLF-300
Product Name
Multi-Cartridge Self-Cleaning Filter
Material
Carbon Steel/Stainless Steel
Flow Rate
450m3/H
Inlet and Outlet
Dn300mm/12 Inch
Drain Diameter
Dn100mm
Working Pressure
Less Than 1.0 MPa
Working Temperature
Less Than 100 Centigrade
Pressure Loss
Less Than 0.015MPa
Filtering Precision
20-500mm
Interface
Flange
Trademark
YLD
Specification
CE, SGS
Origin
Jiangyin, Jiangsu, China
HS Code
8421219990
Model NO.
YLF-300
Product Name
Multi-Cartridge Self-Cleaning Filter
Material
Carbon Steel/Stainless Steel
Flow Rate
450m3/H
Inlet and Outlet
Dn300mm/12 Inch
Drain Diameter
Dn100mm
Working Pressure
Less Than 1.0 MPa
Working Temperature
Less Than 100 Centigrade
Pressure Loss
Less Than 0.015MPa
Filtering Precision
20-500mm
Interface
Flange
Trademark
YLD
Specification
CE, SGS
Origin
Jiangyin, Jiangsu, China
HS Code
8421219990
Automatic backwash filters SS Micron Screen




Filtration
Water enters the filter through the "Inlet". The water then reaches the fine screen, which purifies the flow by separating smaller particles from the water. As more water flows through, impurities build up on the fine screen.
As impurities on the screen accumulate, a pressure imbalance is built up between the internal section of the fine screen and its external section.

 
Cleaning Process 
When the difference in pressure reaches the preset value on the electronic control unit, a series of events is triggered while water continues to flow to the system units. The flushing valve opens, pressure is released from the hydraulic piston, and water flows outside. Pressure in the hydraulic motor chamber and the dirt collector is significantly lowered, and the dirt collector nozzles begin a suction process. The water flows through the hydraulic motor, which rotates the dirt collector around its axis. The pressure released from the piston and the high pressure inside the filter, cause linear movement of the dirt collector. The combination of the linear movement and rotation significantly cleans the whole internal screen surface. The flushing cycle takes 5 seconds. The flushing valve closes at the end of the cycle and the increased water pressure returns the system to its initial position. The filter is now ready for the next cycle, with clean and filtered water flowing through the "Outlet".

 


Application Fields


Power Plants : Treatment of Industrial Water for cooling generators and filtration of 
 
sealing water to increase the service life of the Turbine Shaft sliding-ring seals in 
 
Hydro-Electric Power Stations.
 
Steel Industry: Protection of nozzles and pumps during high-pressure descaling, water 
 
treatment for blast furnaces, rolling mills, cleaning, quenching applications.
 
Chemical Industry : Improvement of product quality by filtering process media. Filtration 
 
of White water, Black Liquor, Starch, Fuel oils, Caustic Solutions, Cooking oils, 
 
brackish/salt intake water etc. For filtration of water used for cooling, process, fire 
 
protection applications.
 
Pulp & Paper Industry : Removal of fibers from white water filtrate, Protection of spray 
 
nozzles for screens of paper making machines. This reduces frequent failures caused due to 
 
clogging and wear.
 
Mining: By filtering underground, spray water of even quality is assured. This results in 
 
more reliable operation of pumps and disc cutting machines
 
Environmental Technology. Used as pre-filters before waste water treatment plants, UV 
 
Treatment, Reverse Osmosis, membrane filtration etc.
 
Sewage Treatment Plants : During Production of industrial water, filtration of a take off 
 
of the clear run can be used to save valuable drinking or well water.
 
Heat Transfer / Heat Supply : Protects heat Exchangers from clogging & wear




Chracteristics of SS multi-cartridge automatic backwash filter
 
a.it is usually used in large flow rate water with high filtration degree ,such as 50-100 micros.
b.there will be 5 to 20 or more pcs SS filter cartridges inside the filter.
c.after one day working,all filter cartridges will be backwashed by setted parameters or pressure control.
the particles which intercepted and accumulated on cartridge will be washed away.
during backwash processing,drain valve will open and particles will be outfall .
for example,backwash time for each cartdiegs will last 10 to 20 seconds.
if there are 10 pcs of SS cartridge ,backwash time will be 220  to 240 seconds.
d. after backwash,the filter will come to next filter period(usually it is 24 hours).
e.you could set the backwash circle as per practical requirement,such as twice or 3 times every 24 hours.
 

Important parts for filtration system:
01. Carbon steel cycloner,
02. Stainless screen,
03. Butterfly valve
04. Sewage device, etc.


Technical Parameters:

ModelFlow
(T/h)
Inlet and outlet diameter
(mm)
Drainage diameter
(mm)
D
(mm)
H
(mm)
H1
(mm)
H2
(mm)
YLF-5070DN50DN503001690265640
YLF-8080DN80DN503501720265660
YLF-100120DN100DN504001760265680
YLF-200200DN200DN805001860290715
YLF-250280DN250DN806001930290755
YLF-300450DN300DN1007002040335755
YLF-350600DN350DN1008002105335770
YLF-400800DN400DN10010002220335800
YLF-5001000DN500DN10012002360365825