China Changlin Small Backhoe Loader / Mini Backhoe (WZC20), Find details about China Backhoe Loaders, Wzc20 Backhoe Loader from Changlin Small Backhoe Loader / Mini Backhoe (WZC20)
Overall Dimension | |||
1 | Overall length(with bucket on ground) | 5840(mm)(Standard bucket) 5800(mm)(Four in one bucket ) | |
2 | Overall width(at stabilizer ) | 2240mm) | |
3 | Width (to outside tyre) | 2057(mm) | |
4 | Width of load Bucket | 2313(mm)(Standard bucket) 2100(mm)( Four in one bucket) | |
5 | Height of cab | 2720 (mm) | |
6 | Max. operating height of digging boom | 3548 (mm) | |
7 | Wheelbase | 2155.5(mm) | |
8 | Back wheel Tread | 1557(mm) | |
9 | Fore wheel Tread | 1714(mm) | |
10 | Min. ground clearance | 355(mm) for 2WD 275(mm) for 4WD | |
11 | Traveling speed(Km/h), 4 forward and 4 reverse | ||
(1) Igear forward/reverse | 5.8/7.0 | ||
(2) IIgear forward/reverse | 10.5/12.6 | ||
(3) IIIgear forward/reverse | 20.1/24.3 | ||
(4) IVgear forward/reverse | 40.2/48.6 | ||
Main Loading Technical Specification | |||
1 | Rated load | 1700(Kg(Standard bucket) 1500(Kg)(Four in one bucket) | |
2 | Operating weight | 7800 Kg(Standard bucket) 8200 Kg | |
3 | Lifting capability to full height | > 2500 Kg | |
4 | Capacity of load bucket | 1.0(m3)(Standard bucket) 0.9(m3)( Four in one bucket) | |
5 | Max. breakout force | > 40kN | |
6 | Max. dump clearance | 2611(m(Standard bucket) 2550(mm)(Four in one bucket ) | |
7 | Max. Dump reach | 726(mm)(Standard bucket) 744(mm) | |
8 | Dumping angle at full height | 43.5º (Standard bucket) 45.5º (Four in one bucket) | |
9 | tilting angle of bucket | On ground position | 40.20 |
In the transportation position | 43.50 | ||
10 | Max. digging depth(with bucket bottom horizontal) | 191mm | |
11 | Min. turning radius | ||
(1) Outside of bucket | 5280(mm) for 2WD 5670(mm) for 4WD | ||
(2) Center of front wheel | 3795 (mm) for 2WD 4300(mm) for 4WD | ||
12 | Lifting time of loading bucket | ≤ 5.1(sec. ) | |
13 | Lowering time of loading bucket | ≤ 4.9(sec. ) | |
14 | Dumping time | ≤ 0.9(sec. ) | |
Main Digging Technical Specification | |||
1 | Rated digging bucket capacity | 0.2(m3) | |
2 | Max. digging depth | 4365(mm) | |
3 | Max. digging force | > 56.6 + 10%kN | |
4 | Max. digging radius | 5390(mm) | |
5 | Max. dumping height | 3510(mm) | |
6 | Central offset | 550mm | |
7 | Swing angle | 1800 | |
8 | Max. rollback angle of digging bucket | 2010 | |
Diesel engine | |||
1 | Model | Cummins 4BT4.5-C99 | |
2 | Type | Direct injection. Turbocharged. Water cooling | |
3 | Rated output | 74 kW / 99HP | |
4 | Rated speed | 2200rpm | |
5 | Total exhaust of cylinder | 4.5(L) | |
6 | Compression ratio | 18.5: 1 | |
7 | Inter-bore of cylinder/stroke | 4X102/138(mm) | |
8 | Model of Alternator | Delco Remy 23SI | |
9 | Parameter of alternator | 24V/50A | |
10 | Voltage of starting motor | 12(V) | |
11 | Model of starting motor | Denso R2.5 | |
12 | Max. Torque at specified speed | 414N. M 1500rpm | |
13 | Starting type | Electric | |
14 | Min. specific fuel consumption | 225(g/Kw. h) | |
15 | Net weight | 338Kg | |
Transmission System | |||
1. Torque Converter | |||
1 | Model | CARRARO | |
2 | Cooling type | Pressure oil circulating | |
2. Transmission case | |||
1 | Model | CARRARO | |
2 | Type | Synchromesh mechanical shift | |
3 | Gear shift position | 4 Forward and 4 reverse gears | |
3. Axle and Tire | |||
1 | Model | CARRARO | |
2 | Type of main reducer | spiral bevel gear, single stage | |
3 | Type of final reducer | Single stage planetary | |
4 | Max. steering angle | 550 | |
5 | Grade ability | > 30% | |
6 | Max. drawing force | 70± 10%(kN) | |
7 | |||
Rear tire 19.5L-24R4-12PR | |||
Working Device Hydraulic System | |||
1 | Model of oil pump | P257A467PRZA12-6 | |
2 | System pressure | 215(kgf/cm2) | |
3 | Model of priority valve | WALVOIL SD16/2, SD16/6 | |
Steering System | |||
1 | Type | Fore wheel Steering | |
2 | Model of steering pump | P257A467PRZA12-6 | |
3 | Model of steering gear | 150-1219 | |
4 | System pressure | 140(kgf/cm2) | |
Oil Capacity | |||
1 | Fuel(diesel) | 151(L) | |
2 | Engine lubricating oil | 11(L) | |
3 | Oil for converter and gear box | 18.5(L) | |
4 | Oil for hydraulic system | 110(L) | |
5 | Oil for driving axles(F/R) | 7.6+17(L) |