Color Painted Aluminium Coil for Car License Plate

China Color Painted Aluminium Coil for Car License Plate, Find details about China Aluminium Coil for Car License Plate, Color Painted Aluminium from Color Painted Aluminium Coil for Car License Plate

Basic Info.

Model NO.

1050, 1200

Surface Treatment

Color Coated

Alloy

Thickness

1.0-1.5 mm

Width

40-1500 mm

Lacquer Type

Trademark

signi aluminium

Transport Package

Wooden Pallet

Specification

coil

Origin

China

HS Code

76061190

Model NO.

1050, 1200

Surface Treatment

Color Coated

Alloy

Thickness

1.0-1.5 mm

Width

40-1500 mm

Lacquer Type

Trademark

signi aluminium

Transport Package

Wooden Pallet

Specification

coil

Origin

China

HS Code

76061190

Product Desciption

Painted Aluminium Coil for car license plate

Typical license plate types
• Pre-treated aluminium to accept retro-reflective film for subsequent embossing and overprinting.
• White coated material for embossing and overprinting.
• White coated base sheet for embossing and black coated thin gauge sheet for perforating and bonding to the base aluminium in producing a composite plate.
Material specifications
The alloy and temper requirements are related to whether the plate is to be embossed. If this is the case, the material is typically 1050 or 1200 in thicker gauges around 1.0 - 1.2 mm, temper H42

In the laminated license plate, the thinner coated aluminium is typically 3105, 0.30 mm thick.

Color Painted Aluminium Coil for Car License Plate

TOP COATING

TEST	METHOD	RESULTS
Coating nature		PVDF	Standard PE
Thickness	ECCA T1	Color:20±2um Primer:5+2um or according spec.	Color:18-2±2um, or according spec.
Specular Gloss	ECCA T2	Standard ±5%	Standard ±5%
Color difference	ECCA T3	⊿E<1(Non-metallics colors)	⊿E<1(Non-metallics colors)
Polimerization	ILA-06	>100 DF	>100 DF
Pencil Hardness	ECCA T4	≥F	≥F
Impact	ECCA T5	100%	100%
Adhesion (Cross cutting+Erichsen)	ECCA T6	>75%	>75%
Bending	ECCA T7	≤2T	≤2T
Resistant to salt acetic acid spray test	ECCA T8	1000h/class 3 (According to EN1396/C 6.5)(Depends on specification)	1000h/Class 1(According to EN 1396/C.6.5)
Water immersion resistance	ECCA T9	1000h-B2S2	--
Resistance to QUVB test	ECCA T10	10 00 h Gloss Retention ≥90% ⊿E≤2	500h Gloss Retention ≥30% ⊿E≤5
Florida test		Class 3 (According to EU1396/C 6.3)	Class 3 (According to EU1396/C 6.3)

BACK COATING

TEST	METHOD	RESULT
Thickness coating	ECAA T1	5±2um
Bending	ECAA T7	≤2T
Polimerization	ILA 06	>100 double roubs
Adhesion after cross cutting	ECAA T6	OK
Adhesion after Erichsen	ECAA T6	OK
Resistance to Salt Spray	ECAA T8	1000 hours

Back coat epoxy blue:
Good adhesion to adhesive and PU foam.
Good resistance to corrosion.
Back coat epoxy grey:
Good adhesion to PE(composite panel)
Good resistance to corrosion
Recommended alloys:
A AA1100,AA1050, AA3003, AA3004, AA3005, AA3105, AA5005, AA5182, AA5052, AA5754, .AA5454, AA8011 Customer can specify its needs in order to choose the best thickness, alloy and temper of the metal.

Color Painted Aluminium Coil for Car License Plate