China Rotary Kiln for Calcined Kaolin Clay, Find details about China Calcined Kaolin, Calcined Kaolin Clay from Rotary Kiln for Calcined Kaolin Clay
Rotary Kiln for Calcined Kaolin Clay
1. Introdution of Calcined kaolin process
Calcining kaolin in rotary kiln is a widely used method for producing special kaolin products.
It has four calcination temperature ranges of 700 ºC, 925 ºC, 1000 ºC and 1400 ºC.
The calcined kaolin can be used as filler for cable plastic and rubber sealing ring, and kaolin calcined at 1000 ºC can be used as paper filler instead of Tio2,. Kaolin calcined at 1 500 ºC can be used as filler for refractory products and lining of optical glass crucible.
2.Pictures of Calcined kaolin process
3. Working principle of Calcined kaolin process
Kaolin rotary kiln operates slowly under heavy load and alternating speed at high temperature.
The maintenance of accessories and the level of thermal control are related to the safety and efficiency of rotary kiln operation.
The maintenance of the transmission device is focused on the lubrication, running state, dynamic detection and meshing accuracy of the gear, and the installation accuracy of the supporting device determines whether the rotary kiln can operate safely and reliably.
In operation, attention should be paid to the distribution of bearing capacity, the arrangement of the supporting wheel, the upward and downward pressure and time of the hydraulic gear, the bearing force of the wheel, the gap between the wheel and the pad. The sealing device directly affects the thermal system and operation cost of rotary kiln. Strengthened return Daily maintenance of rotary kiln data analysis, conducive to the management of equipment.
4.Technical parameters of Calcined kaolin process
| dimension | Capacity(t/h) | main moter power (kw) | block form | prop up an amount | weight (t) | |
speed (r/min) | (%) Gradient | ||||||
1.4×33 | 0.39-3.96 | 3 | 0.9-1.3 | 15 | machinery | 3 | 47 |
1.6×36 | 0.26-2.63 | 4 | 1.2-1.9 | 30 | machinery | 3 | 53 |
1.8×32 | 0.16-1.62 | 4 | 1.9-2.4 | 30 | machinery | 3 | 78 |
1.8×45 | 0.21-2.11 | 4 | 2.8-3.4 | 30 | machinery | 3 | 80 |
2.0×45 | 0.32-2.32 | 3.5 | 3.0-4.2 | 30 | machinery | 3 | 100 |
2.2×50 | 0.98-2.93 | 3.5 | 3.5-4.8 | 30 | machinery | 3 | 130.8 |
2.5×40 | 0.44-2.44 | 3.5 | 6.0-7.2 | 55 | machinery | 3 | 151 |
2.5×50 | 0.48-1.44 | 3.5 | 7.0-8.0 | 55 | machinery | 3 | 167.5 |
(9-11) | |||||||
2.5×54 | 0.48-1.44 | 3.5 | 8.0-8.6 | 55 | machinery | 3 | 172.5 |
(10-12) | |||||||
2.8×44 | 0.8-2.39 | 3.5 | 11-12.5 | 55 | machinery | 3 | 198.5 |
(20-22) | |||||||
3.0×48 | 0.5-1.35 | 3.5 | 21-25 | 55 | machinery | 3 | 237 |
(35-42) | |||||||
3.2×50 | 0.48-2.44 | 3.5 | 25-35 | 55 | machinery | 3 | 278 |
(45-50) | |||||||
3.5×70 | 0.5-1.54 | 3.5 | 35-45 | 125 | machinery | 3 | 411 |
(55-70) | |||||||
4.8×74 | 0.35-4 | 4 | 85-95 | 630 | machinery | 3 | 841 |
(100-120) |
5. Characteristics of Calcined kaolin process
(1) Simple structure, high unit volume, long kiln life, high operating rate, stable operation, high heat transfer efficiency, low heat consumption, etc.
(2) Automatic temperature control, over-temperature alarm, secondary air use,long kiln lining g life.
(3) Advanced kiln head kiln tail sealing technology and device, stable operation, high output and so on.
6. Delivery Picture of Calcined kaolin process
7. Product of Rotary Kiln in Hennan Hongke