Wall Mounted Active Power Filter Apf

China Wall Mounted Active Power Filter Apf, Find details about China Apf, Active Power Filte from Wall Mounted Active Power Filter Apf

Model NO.
APF
Shell Material
Steel Plate
Shell Protection Grade
IP23
Brand
Owned Brand
Trademark
CLBE
Transport Package
Carton
Specification
500*260*550
Origin
China. Wenzhou
HS Code
3252151152
Model NO.
APF
Shell Material
Steel Plate
Shell Protection Grade
IP23
Brand
Owned Brand
Trademark
CLBE
Transport Package
Carton
Specification
500*260*550
Origin
China. Wenzhou
HS Code
3252151152
Products describe
The active power filter (APF) is mainly composed of controller, isolation switch (circuit breaker), contactor, IGBT, driving circuit, protection system, fuse, connection reactor, DC capacitor, etc. The controller measures phase A, C reactive power(current), produces control signal, drives IGBT on/off and produces harmonic and reactive current same as system harmonic current but in opposite phase to filter system harmonic, reduce reactive power and keep system power factor approximately at 1.
    Our APF equipment is module structure,there are two types Wall Mounted and cabient mounted.The Wall Mounted type is preferred to be used in equipment improvement which is very conveninet to install.  

The Sanhe Modular Active Harmonic Filter series are suitable for applications of all types, providing harmonic mitigation, load balancing and step-less reactive power compensation for inductive and capacitor loads.  

 Main Parameter
Rated voltage: 0.4kV,0.69kV
Frequency: 45Hz ~ 63Hz
Three level topology and high efficiency up to 97%
Filtering capacity: THDi (current distortion rate) < 5%
Response time: less than 15ms
Communication interface: RS485, network port,Wi-Fi

ModelFeature
Harmonic, dynamic reactive power and imbalance compensation mode available.
Compact and reasonable structure, flexible installation.
Combination of FFT and instantaneous power algorithm available.
3DSP+CPLD control mode
2nd ~50th harmonic can be compensated simultaneously, and specific harmonic orders are programmable.
Harmonic compensation, reactive power compensation and three-phase unbalance compensation.
Communication protocol: the power of the general protocol, Modbus protocol, TCP/IP
Fault alarm and recording function, can be as much as 500 alarm records.
With all kinds of complete and effective protection measures, such as over-voltage protection, under voltage protection, short circuit protection, inverter bridge reverse protection, compensation protection etc.
Protection grade: IP20, the remaining IP grade can be customized
Human-friendly LCD displaying all voltage, current and harmonic data in numerical, waveform and spectrum. Log record is available.
 Technical parameterWall Mounted Active Power Filter Apf

Performance index

 
  APF(A)SVG(kvar)
SpecificationsModule specification305075100150305075100
Number of parallel possibilities(W*H*D)500*220*550500*260*580500*220*550500*260*580
\ \ 
Number of parallel possibilities8
InputWork voltage400v/690(-20%~+15%)
Work frequency50HZ(-10%~+10%)
Current transformer100:5~10000:5
Output800*800 countPower≤150APower≤Kvar
800*800 countPower≤300APower≤200Kvar
800*800 count
800*800 countPower≤900APower≤600Kvar
FunctionTo compensate the harmonic2-50 times2-13 times(50 percent of the rated current)
Harmonic filtration rate>97%
Reactive power compensation"-1~+1  adjustable
Compensate for three imbalances100%Full compensation for imbalance
communication protocolcommunication modeRS232,485,Modbus agreenment TCP/IP optional
communication interfaceRs485,net mouth
upper machine softwareHave ,all parameters are set though the upper computer
Failure warningHave ,Record up to 500 alarm messages
MonitoringSupport each module independent monitoring
Technical indicatorsFull response time<10ms
Active loss<2.5%
the cooling wayIntelligent air cooling
Noise<60dB
sampling/control frequency160kHZ
Equivalent Switch frequency80kHZ
cutoff frequency of current loop4kHZ
protection functionoverpressure,under voltage,overhearting ,Over current ,a short current Etc 
CT Installation positationThe load side/The grid side optional
Mechanical propertieshanging sizeThe wall hanging is the same size as the module
Module weight25Kg(≤75A/50kvar)50kg(≥100A/100Kver)
colorFine orange lines. 
Environmental requirementWorking temperature"-10ºC~+45ºC
An altitude of<5000 Meters
Relative humidity<95% no lon
protection gradeIp20

Anti-pullution

Wall Mounted Active Power Filter Apf
Wall Mounted Active Power Filter Apf



















Wall Mounted Active Power Filter Apf
Product Size
Wall Mounted Active Power Filter Apf





Wall Mounted Active Power Filter Apf