I .GARBAGE TRUCK SERIES
Compresses garbage truck--- Widely used to collect the loads of construction and demolition waste, Loading and compression unit is one of core parts of back-loading compression refuse collector, its function directly relate to the loading cubage and quality of refuse truck.
Hook lift garbage truck---- Widely used to collect the loads of construction and demolition waste, one truck available with several roll-off containers, easy to raise the container with hydraulic system.
Dump garbage truck---- Widely used to dispose loads of construction and demolition waste, easy to dump the waste with hydraulic system.
Docking garbage truck---- Used to transfer and dispose the compressed waste of the urban area. The operation system can be controlled by the hydraulics manually or electrically. After the garbage is compressed at the station, the garbage container is lifted upwards and open its door. At the same time, the truck opens its rear door of the garbage body. Then the two doors are docked and the waste is pushed from the container of the station into the garbage body of the truck. After that, the truck can transfer the waste and dispose it. It is the most common way of waste disposal in China presently. One truck can be shared by several garbage stations, which reduces the equipment cost and space. All of the operation systems are driven by the truck engines through the hydraulics. The truck body is constructed with high quality carbon steel and from a fully-sealed structure, which can avoid the secondary pollution.
Arm-roll garbage truck---It is made up of chassis, garbage body, hydro-cylinder,etc. The hydro-cylinder is used to speed down the rolling arm; the truck can be separated from the garbage tank and shared by several tanks.
Hydraulic lifter garbage truck----The garbage tank of the truck can be lifted upwards and turned over by the chains and the hydraulic hydro-cylinder. By this way, it can collect the garbage at different places into the tank and dump them out at one time.
II . GARBAGE TRUCK SPECIFICATION
| Model VLD5163ZYSZH |
| Chassis | ZZ3167M3811 |
| Engine | Make: SINOTRUK |
| Disel:4-stroke direct injection diesel engine |
| Engine model:WD615.62,Euro2, emission standard |
| 6-cylinder in-line with water cooling, turbo-charging and intercooling |
| Maximum output:266 hp(196KW)at 2200 rpm according to DIN |
| Maximum torque:1100 Nm at 1300-1600 rpm |
| Number of cylinder :6 |
| Displacement:9.726 L |
| Bore:126mm |
| Stroke:130mm |
| Mean piston speed:11.2 m/s |
| Compression ratio:27.3 hp/L |
| Specific fuel consumption:198g/KWh |
| Engine oil filling quantity: 20L |
| Cooling system filling quantity(long-term filling): 40L |
| Thermostat with 71°C opening begin |
| Single cylinder air compressor |
| Rigid fan |
| Clutch | Single-plate dry clutch, diameter 420mm,hydraulically operating with air assistance |
| Transmission | ZF transmission, model 6S-120, synchromesh, 6 forward & 1 reverse |
| Ratio: 9.01 5.24 3.22 2.29 1.50 1.00 8.30(R) |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange |
| Front Axle | Steering with double T-cross section beam |
| Rear Axle | Pressed axle housing, central single reduction with hub reduction and with differential locks between wheel and axles |
| Ratio:5.73 |
| Chassis | Frame :U-profile parallel ladder frame with section of 300×80×8 mm, all cold riveted cross members |
| Front suspension: 9 semi-elliptic leaf springs with width of 90mm |
| Rear suspention:15 leaf semi-elliptic springs with width of 90mm, hydraulic telescopic double-action shock absorber and stabilizer |
| Fuel tank:200 liter capacity, with locking fuel cap, fitted to the off side of the chassis |
| Steering | ZF8095,hydraulic steering with power assistance |
| Ratio:26.2 |
| Brakes | Service brake: dual circuit compressed air brake |
| Parking brake (emergency brake):spring energy, compressed air operating on rear wheels |
| Auxiliary brake: engine exhaust brake |
| Option: ABS |
| Wheels & Tires | Rims:8.5-20,10 hole-steel |
| Tyres:12.00-20 tube |
| Option:12R24 tube, 12R22.5 tubeless |
| Electrics | Operating voltage:24 V, negative grounded |
| Starter:24 V, 5.4Kw |
| Alternator:3-phrase,28 V,1000 W |
| Batteries:2×12 V,165Ah |
| Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light |
| Dimensions in mm | Wheel base 3800 |
| Front wheel track 1934 |
| Rear wheel track 1800 |
| Front overhang 1500 |
| Rear overhang 1624 |
| Approach angle(°) 22 |
| Departure angle(°) 36 |
| Overall dimension(L x W x H mm) 8065x2500x3290 |
| Weight in kg | Dead weight 9840 |
| Rated loading capacity at fifth wheel 6030 |
| Gross vehicle weight 16000 |
| Performance | Maximum driving speed(km/h) 75 |
| Maximum gradeability(%) 39 |
| Minimum ground clearance(mm) 298 |
| Minimum turning circle(m) 15.4 |
| Fuel consumption(1/100km) 26 |
| Body | Volume of body(m3) 12.3 |
| Volume of filler(m3) 2.0 |
| Time of one filling cycle(s) ≤25 |
| Lifting time of filler (s) 8-10 |
| Time of discharge (s) ≤40 |
| Front/rear sewage capacity (L) 250+150 |
| Max compression force (kg) >25000 |
Garbage truck classification and loading volume:
1.Compactor garbage truck:4-18m3
2.Dump garbage truck:3-10m3
3.Hermetic garbage truck:3-14m3
4.Swing arm garbage truck:4-12m3
5.Pull arm garbage truck::3-16m3
6.Butt-joint garbage truck:4-17m3
7.Loading & unloading garbage truck:3-14m3
III.OUR ADVANTAGES
Why choose us?
Experience
10 years experience of production,sales,research and development in the field of special trucks.
Specialization
We can produce according to your demand, the material,the size, the color and the logo is optional for you.
Good quality
Has solid technology, advanced equipments;Reliant quality and flexible modes of operation also have strict quality control system and passed the iso9001-2008 and the 3c (china compulsory certification),with sgs,bv certifcate as well.
Chassis supply
We have a very good long term cooperation relationship with chassis manufacturer,such as dongfeng,foton,sinotruck,shacman,iveco,faw,hino,camc,north-benz,ect.
Production supply capacity
Company scale
More than 3000 employees with 1000 acres factory, total asset 2 billion.
We manufacture the truck as soon as possible once your order confirmed.And for the stock, we can delivery it immediately.
Our services
1.We can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
2.Free consultation forever.When you meet small problems, professional advices can help you to solve them soon.
3.One year free cost warranty.
4.Spare parts forever.When you need spare parts, we can send them to you immediately.
IV.COMPANY INTRODUCE:
Hubei veldlion machinery co., ltd ,which is appointed by the ministry of industry and information technology of china, is a big manufacturer producing all kinds of special trucks.It has solid technology,flawless inspection,advanced equipments,reliant quality and flexible modes of operation.What's more, it has roundly passed the certificaton of iso 9001-2008 and the 3c certification(china compulsory certification) and other certifications that export needed.
Our company can design and produce many kinds of special trucks accurately as your request.Also own independent export right, wit a mount of clients overseas, such as the u.N., sudan, nigeria, north america, west africa, congo, vietnam ghana, kazakhstan etc.We strives for the survival by the quality and credit standing is the guarantee of our success
V. PROFESSIONAL PACKING AND TRANSPORTATION
Thick wax polished on products before shipping to protect.
Use container, RORO/bulk ship or others as your requirement.
We provide transportation insurance to guarantee the new and great condition of products for customers
VI. CONTACT INFORMATION
HUBEI VELDLION MACHINERY CO., Ltd
ATTN: Elaine Lee
Mobile phone: +86 15926229900
Website: veldlion.en.made-in-china.com