China Kgps Medium Frequency 0.5t Steel Iron Induction Melting Furnace, Find details about China Induction Melting Furnace, 0.5t Induction Melting Furnace from Kgps Medium Frequency 0.5t Steel Iron Induction Melting Furnace
Medium frequency induction melting furnace composing:
1. KGPS medium frequency power supply controller 2. Capacitor cabinet
3. Induction melting furnace 4. Water cooling cable 5. Crucible mould
6. Mechanical tilting device
Induction melting furnace power supply cabinet features:
• Easy operation:
A full time operator specially for power supply is not needed .There is only one switch for turning on or off and one power adjustment knob. After started, the only thing that needs to be done is rotating the power adjustment knob to the largest location, others are controlled by the device itself.
• Safety protection functions of induction melting furnace:
1. The main circuit and short circuit protection
2. SCR overvoltage protection
3. Main circuit phase fault protection
4. The main circuit phase loss protection
5. Low water pressure protection
6. SCR overcurrent protection
• Highly reliable electrical control board
In the operation, the 3-phase current is balanced. Due to the advanced design, the 3-phase power supply's sequence could be connected randomly. Moreover there is no limit to connect to capacitor cabinet and furnace. All of these jobs can be judged to be adapted automatically by the device itself. It makes the installation and maintenance very easily.
Features of the furnace structure:
• The furnace body is made by thick aluminum alloy shell to reduce the magnetic leakage and ensure furnace body strength.
• The thick T2 standard copper tube is taken use for induction coil to provides high melting efficiency.
• Open type furnace hearth reduces moisture,and design cooling rings on the bottom, which extend the furnace lining life time.
• The titling is controlled by reducer gear box. The remote control panel can set the furnace in any position when titling. The max tilting angle is 95 degrees.
KGPS-400 induction aluminum melting furnace parameters:
Rated power | 400KW |
Working voltage | 3 phase 380V, 50/60HZ |
Frequency | 800HZ |
Max temperature | 1800ºC |
Rated melting capacity | 500kg for iron or steel |
MF voltage | 750V |
DC voltage | 500V |
DC current | 800A |
Control part dimension(L*W*H) | 1580*950*2000mm |
Control part weight | 780kg |
Melting time | about 50 minutes per batch |
Furnace dimension(L*W*H) | 1650*1310*1215mm |
Furnace weight | 1000kg |
Model | Melting capacity(kg) | ||
iron, steel | copper | aluminum | |
KGPS-100 | 100 | 150 | 150 |
KGPS-160 | 150 | 200 | 200 |
KGPS-200 | 250 | 300 | 300 |
KGPS-300 | 350 | 450 | 500 |
KGPS-400 | 500 | 750 | 750 |
KGPS-500 | 750 | 1000 | 1000 |
KGPS-800 | 1000 | 1500 | 1500 |
KGPS-1000 | 1500 | 1800 | 2000 |
KGPS-1400 | 2000 | 2000 | - |
KGPS-2000 | 3000 | 3500 | - |
KGPS-3000 | 5000 | - | - |