Litio Battery 3.2V Single Cell 200ampere

China Litio Battery 3.2V Single Cell 200ampere, Find details about China Lithium Ion Battery 200ah-B for Solar Energy, 200ah-B for Solar Energy/Wind from Litio Battery 3.2V Single Cell 200ampere

Model NO.
GBS-LFP200Ah-B
Installation
Packaged
Rechargeable
Chargeable
Weight
6.5kg
Rated Capacity
200ah
Cycle Life
3000 Cycles
Trademark
GBSystem
Transport Package
Special Carton for Dangerous Goods
Specification
290*66*238mm
Origin
China
HS Code
8507600090
Model NO.
GBS-LFP200Ah-B
Installation
Packaged
Rechargeable
Chargeable
Weight
6.5kg
Rated Capacity
200ah
Cycle Life
3000 Cycles
Trademark
GBSystem
Transport Package
Special Carton for Dangerous Goods
Specification
290*66*238mm
Origin
China
HS Code
8507600090

Lithium Ion Battery

Good performance under high and low temperature;
Good safety performance;
Good cycle life time;
No pollution during manufacture.


Application:
Electric vehicle           
Golf cart
Electric motorcycle
Electric boat
Electric forklift
Telecommunication
Distributed Grid Energy Storage system
Mining equipment
Solar energy storage system
Marine
Backup power
Household energy storage system

 

Certifications
Litio Battery 3.2V Single Cell 200ampere
Litio Battery 3.2V Single Cell 200ampere

Litio Battery 3.2V Single Cell 200ampere

Cell Dimension
Litio Battery 3.2V Single Cell 200ampere



Specification of single cell

Litio Battery 3.2V Single Cell 200ampere


Basic Performance

(1) Output with high magnification: Standard discharge current is 0.5C-1.0C, instant impulse discharge current is 10C for 2 seconds.
(2) Good performance under high temperature, it could work under 65°C temperature.The battery structure is safe and good.
(3) Good performance under low temperature, discharge capacity in no less than 90% of rated capacity when discharging with 1C under -20°C; no less than 70% of rated capacity with 0.33C.
(4) Good safety performance:When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well. When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.
(5) Good cycle life time, the discharge capacity is still over 80% after 3000 cycle times of single cell (80%DOD).
(6) It can fast charging. It could be charged to 80% within 0.5h and charged full with 1h.
(7) Low cost.
(8) No pollution during manufacture and usage.
 

Matters Needing Attention

(1) Please check if spare parts are completed when open the package and read the operation manual carefully.
(2) Do not make the battery Short Circuit,do not over charge and discharge.
(3) Please charge the new battery to full capacity before discharge for the first use.
(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.
(5) Checking the voltage of battery, normally it is 3.2V-3.3V.
(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.
(7) Rivet or screw is used for battery connector.
(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevant connection which fixed with screws.
(9) The charger used should be approved by our company in order to match with our lithium batteries.
(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above. It won't be within our company warranty.

Requirement for safety assurance

For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of Lithium-ion cell advance. And consult about the high rate current, rapid charge and special application in the same way.
 


Our characteristics:

Intelligent Production Line

Automatic Warehousing System

Clear Visual Management

Standardized Management Certifications

Research and Development Innovation 

Research and Development Capability

 

Litio Battery 3.2V Single Cell 200ampere