1. Product Description:
1060 aluminum sheet with high corrosion resistance and formability of the occasion, but the strength is not demanding.
1100 aluminum sheet is for processing need to have good formability and high corrosion resistance but does not require high strength parts parts, such as food industry and storage containers, sheet metal parts, deep drawing or spinning concave vessels, welding parts , Heat exchangers, printing plates, nameplates, reflective appliances
3003 aluminum sheet is for processing need to have good forming performance, high corrosion resistance and good solderability parts parts, or both require these properties and the need to have a higher strength than 1XXX alloy work, such as kitchenware, food and chemical products With the storage device, the transport of liquid products in the tank, cans, sheet metal processing of various pressure vessels and pipes
3004 aluminum sheet is for aluminum cans, require more than 3003 alloy strength parts, chemical products production and storage devices, sheet metal processing parts, construction and processing parts, construction tools, all kinds of lighting parts
3105 aluminum sheet is for room partition, baffle, activities, board, gutters and down pipes, sheet metal forming parts, caps, stoppers, etc.
5005 aluminum sheet and 3003 alloy similar, with moderate strength and good corrosion resistance. Used as a conductor, cooker, dashboard, shell and architectural trim. The anodic oxide film is brighter than the oxide film on the 3003 alloy and is consistent with the tone of the 6063 alloy
5052 aluminum sheet, This alloy has good forming processability, corrosion resistance, can be candle, fatigue strength and moderate static strength, used in the manufacture of aircraft fuel tanks, tubing, and traffic vehicles, ship's sheet metal parts, instruments, street lamps and rivets , Metal products and so on
5083 aluminum sheet is for applications where high corrosion resistance, good weldability and moderate strength are required, such as warships, automotive and aircraft plate welds; pressure vessels, refrigeration units, towers, drilling equipment, traffic Transport equipment, missile components, armor and so on
6061 aluminum sheet requires a certain strength, weldability and high corrosion resistance of various industrial structures, such as the manufacture of tower buildings, ships, trams, furniture, machinery parts, precision machining and other tubes, rods,
6063 aluminum sheet Industrial profiles, construction profiles, irrigation pipes and extruded materials for vehicles, benches, furniture, fences, etc.Insulation material for forgings and welded structures
2.Product Details:
| Alloy No. | Thickness | Width | Length | Temper |
| (mm) | (mm) | (mm) |
| A1050,A1060, A1070,A1100 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18, H24,H26,etc |
| A3003,A3105,A3004 | 0.2-100 | 20-2200 | 20-8000 | O,H14,H18,H24,etc |
| A5052 ,A5005,A5083,A5754 | 0.2-100 | 20-2200 | 20-8000 | O,H18,H24,H32,H34,H111,H112 ,etc |
| A6061,A6082,A6063 | 0.2-200 | 20-2200 | 20-8000 | T4,T6, T651,etc |
| A8011 | 0.2-100 | 20-2200 | 20-8000 | O,H12,H22,H14,H16,H18,H24,H26, etc |
| Packing : Export wooden pallets. The bundle wegiht not exceed 2MT. Loading:by 1x20GP. |
| The inner size of container is below: |
| 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM,23MTS |
| 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM,27MTS |
| 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM,27MTS |
| Standards:ASTM-B209. EN573-1, GB/T3880.1-2006 |
| Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
| Application : Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
| MOQ | 2.5 tons |
| Payment term: | L/C at sight or 30% TT as deposit and the balance paid against copy of B/L |
| Delivery Time | 7 days after 30% TT payment or receiving L/C copy |
| Kind attention: Specifications can be customized as the customer's requirements. |
3. Applications:
Aluminum sheet are widely used for aluminum and plastic composite board, aluminum and plastic pipe, and bottle/tank cap, as well as curtain wall board/aluminum curtain board, ceiling board/specialshaped ceiling board, aluminium sheets for cable channel, conmestic packging and electrical manufacture, etc.
Building Applications - Pre-painted sheet, Anodised sheet, Roofing Coil, Patterned sheet ( 5 Bar Tread plate and Propeller Plate)
Road transportation - Pre-Painted Roofing and Caravan Coil, sheet and plate for the bull bar industry
Road signage - Mill Finish and Linished 1.60 and 2.00 5052 H38 grade aluminium from leading manufacturers of aluminium sheet for use in the road sign industry. ALSPEC also carries complementary extrusions to suit.
Marine - ALSPEC carries a wide range of sheet and coil for use in local marine markets.
General Fabrication - ALSPEC carries a variety of sizes, alloys and finishes to suit a wide range of end use applications. Examples include:
Mill finish 5005, 5052, 5083
Anodising quality mill finish from Europe
PE Coating available 50UM, 80UM, 100UM
Pre-painted aluminium coil
Our representation supports worldwide markets that may include:
Architectural products Marine Transport Sign manufacture Roofing products Special anodizing applications General engineering and fabrication Others
4. Aluminium sheets other factor introduction:
Aluminium sheet is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminium foils and beverage cans are alloys of 92% to 99% aluminium. The main alloying agents are copper, zinc, magnesium, manganese, and silicon (e. G., duralumin) and the levels of these other metals are in the range of a few percent by weight.
5. Contact
Attn: OLivia Chai
Skype: 3140983238(@)qq.com
E-Mail:sales5(@)tedaganghua.com
Office: +86 22 86896637 ext 603
Mobile:+86 182 2275 9411
Whatsapp: +8615320038380
Web:tjganghua.en.made-in-china.com
Add:Room1401,Builing2,BeiChenTower,TianJin,China