Rain Gutter Making Machine And Water Downspout Roll Forming Machine

Gutters prevent water goes into the fabric of the building by channelling the rainwater away from the exterior of the walls and their foundations.Gutter forming machine can make k tyle gutter or half round gutter.One machine can not make all designs.

1.Main parameters of gutter machine:

  Parameters of raw material

Decoiling →  Roll Forming  →Hydraulic cutting→Collecting table

2.Photos of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:

2.1 Half round rain water gutter forming machine:


2.2 Seamless gutter making machine:



2.3 Square water downspout downpipe cold roll forming machine:



The usage and of the Rainwater gutter:



3.Technology parameters of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:
The weight of Aluminium PPGI Rain Water Gutter Roll Forming Machine is about 5.2 tons.The total dimension of machine:8700(L)*600(W)*1200mm(H)

3.1 Manual decoiler of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:
Capacity of uncoiler:5tons 
Expansion of segment:Manual 
Rotation of segment:Manual  
Number of segment:4
Range of segment expansion:480-520mm 
Operation method:Manual  
Qty: 1

3.2 Guiding system of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:
To keep the material straight
Entrance and adjustable wheel: 2rolls
Qty: 1

3.3 Main forming machine of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:
Coil thickness:0.4-0.7mm 
motor type: 3 phase asynchronous motor 
Main motor power:5.5kw+4kw(normal speed),
Approx.18groups roller including correction rollers
Roller : S45C with quenching treatment,Shafts  of rollers are tooled by grinding machine for two times to ensure the precision of final product.
Shaft:Diameter of max shaft: ø60mm(hardening and tempering)
Transmission type:by one inch chain
Qty: 1

3.4 Hydraulic cutting of Rain Gutter Making Machine And Water Downspout Roll Forming Machine:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring 
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.     
Power of motor:3kw 
    
3.5 Product support frame of Rain Gutter Making Machine And Water Downspout Roll Forming Machine
Size: L 3m x W0.5m