Products

Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

China Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine, Find details about China Blow Molding Machine, Automatic Blow Molding Machine from Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

Model NO.
ABLD120
Max. Product Volume
3000L
Blow Moulding Type
Extrusion Blow Moulding
Place of Origin
Jiangsu, China (Mainland)
Brand Name
Apollo
Certificate
Ce
Trademark
APOLLO
Transport Package
Film Packing
Specification
ISO9001
Origin
China
HS Code
8477301000
Model NO.
ABLD120
Max. Product Volume
3000L
Blow Moulding Type
Extrusion Blow Moulding
Place of Origin
Jiangsu, China (Mainland)
Brand Name
Apollo
Certificate
Ce
Trademark
APOLLO
Transport Package
Film Packing
Specification
ISO9001
Origin
China
HS Code
8477301000
Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

Tanks Extrusion Blow Molding Machine ABLD150:

ABLD150 plastic drum making machine was specially designed for making plastic water tanks,chemical drums,plastic cans, lubricant oil drums,plastic drums, plastic toys and other plastic containers not over 3000L.
Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine
Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine
Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

The features of this machine:
(1)It is suitable for producing PE,HDPE,PP so on,plastic containers and bottles in all shapes are available,the max.product volume is up to 3000L.
(2)Single station single die head design,very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption,high efficiency,quick and safe operation,easy for maintenance.
(5)Accumulation die head, 100 point parison controller equipped.  
(6)Bottom blow technology make the product perfect.
(7)Auto lubricant system controlled by PLC.
(8)Equipped with germany servo system , can save more than 40% power and very stable .
Two Layer HDPE PE Plastic Barrel Blue Oil Bottle Blow Molding Machine Making Machine

Technical Parameters: ( ABLD150)
 

Max. Product volume
3000 liters

Screw diameter
150mm

Screw L/D ratio
33L/D

Screw drive power
132KW

Screw heating capacity
36 KW

No.of heating zone
6 zones

Output of HDPE
620-840KG/H

Oil pump drive power
75 KW

Clamping force
1800 KN

Max.size of mold
1730 X 2200mm

Mold stroke
1000-2700mm

Max.die diameter
1000mm

Blowing pressure
1.2 mpa

Air Volume
6 M³/MIN

Cooling water pressure
0.3mpa

Water consumption
240L/MIN

Size of Machine
11.5x7.5x8m

Weight of machine
72 ton
 

INSTALLATION AND TEST

The buyer should place the machine to the right position and inform the supplier after the machine reach the buyer's factory. The seller will send the engineer to test run the machine until it is running in normal state. The buyer will bear his round-trip air tickets, accommodation, and hotel and so on in BUYER'S side. Besides,the buyer will pay 100USD/day/person for technology fee.  

VALIDITY OF OUR OFFER:

The offer is valid for any order placed within a period of 30 days. Unless otherwise stated, all conditions and terms are based on this list.
The offer is offered for the buyer's need in selecting and not act as the enclosure of contract. The contract is the only standard.
 

You Might Also Like