Products

CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor

China CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor, Find details about China AC Contactor, Contactor AC from CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor

Model NO.
CJX2
Standard
IEC 60947-1, IEC 60947-4-1
Frequency of Operation
300-1200 Times/Hour
Wiring Capacity(mm)
1.5-35
Installation
DIN Rail / Screw Installation
Mechanical Life
600-1000
Product Keywords
AC Magnetic Contactor 12 AMP
Certification
CE,CB,CCC,TUV ..
Trademark
CNC
Origin
Zhejiang, China
Model NO.
CJX2
Standard
IEC 60947-1, IEC 60947-4-1
Frequency of Operation
300-1200 Times/Hour
Wiring Capacity(mm)
1.5-35
Installation
DIN Rail / Screw Installation
Mechanical Life
600-1000
Product Keywords
AC Magnetic Contactor 12 AMP
Certification
CE,CB,CCC,TUV ..
Trademark
CNC
Origin
Zhejiang, China

CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor

Product Description


CJX2 series AC Contactor is suitable for using in the circuits of rated voltage up to 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling the AC motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The Contactor is produced according to IEC 60947-4.
CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor
Specifications
Type  CJX2-09CJX2-12CJX2-18CJX2-25CJX2-32CJX2-40CJX2-50CJX2-65CJX2-80CJX2-95
Rated insulation voltage (Ui) V690
Rated thermal current (Ith) A20203240506080809595
Rated operation current (Ie)AC-3, 380VA9121825324050658095
AC-3, 660VA6.68.91218213439424955
AC-4, 380VA3.557.78.51218.524283741
AC-4, 660VA1.523.84.47.59121417.321.3
Max. power of 3 phase motor controlledAC-3, 220VkW2.2345.57.5111518.52225
AC-3, 380VkW45.57.5111518.522303745
AC-3, 660VkW5.57.5101518.53033374555
Electrical lifeAC-310000 t100808060
AC-410000 t20201510
Mechanical life 10000 t1000800800600
Operation frequencyAC-3t/h1200600600600
AC-4t/h300300300300
Matching fuse type  RT16-20RT16-20RT16-32RT16-40RT16-50RT16-63RT16-80RT16-80RT16-100RT16-125
Matching thermal relay type  JR28-25JR28-25JR28-25JR28-25JR28-36JR28-93JR28-93JR28-93JR28-93JR28-93
Wiring capacity mm²1.51.52.5461016162535
Coil   
Control power voltage (Us)ACV36, 110, 127, 220, 380
Allowed control circuit voltageCloseV85%~110%Us
OpenV20%~75%Us(AC)
 CloseVA70110200
KeepingVA81120
Loss powerW1.8~2.73~46~10
Auxiliary contact   
Rated thermal current (Ith) A10
Rated operation voltage (Ue)AC-15V380
DC-13V220
Rated control capacityAC-15VA360
DC-13W33
Note:3 pole is normal type,not remarked in the type name.
CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor
Specifications
Ambient temperature-5ºC~+40ºC
Altitude≤2000m
Relative humidityThe maximum temperature of 40 degrees, the air relative humidity not exceed 50%, at a lower temperature can allow for a higher relative humidity, if humidity changes as a result of occasional gel generated,should eliminate it.
Pollution level3
Installation categoryIII
Installation positionThe installation degree of the tilt and vertical plane should not exceed ±22.5°, should be installed in place with no significant impact shaking and vibration
InstallationThe installation of fastening screws can be used,the CJX1-9~38 contactor can also be installed on 35mm standard DIN rail.
CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor

Company Profile

CNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic ContactorCNC Factory Accepted Custom Voltage AC Magnetic Contactor 12 AMP AC Electrical Contactor AC Electric Magnetic Contactor

You Might Also Like