Diesel Catalytic Converter Diesel Particulate Filter

China Diesel Catalytic Converter Diesel Particulate Filter, Find details about China Catalyst, Catalyst Support from Diesel Catalytic Converter Diesel Particulate Filter

Model NO.
DPF
Usage
as Catalyst Used in Diesel Engine
Trademark
DXY
Origin
China
Model NO.
DPF
Usage
as Catalyst Used in Diesel Engine
Trademark
DXY
Origin
China
Diesel particulate filter
A diesel particulate filter (or DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine. Wall-flow diesel particulate filters usually remove 85% or more of the soot, and under certain conditions can attain soot removal efficiencies of close to 100%. Some filters are single-use, intended for disposal and replacement once full of accumulated ash. Others are designed to burn off the accumulated particulate either passively through the use of a catalyst or by active means such as a fuel burner which heats the filter to soot combustion temperatures; Engine programming to run when the filter is full in a manner that elevates exhaust temperature or produces high amounts of NOx to oxidize the accumulated ash, or through other methods. This is known as "filter regeneration". Cleaning is also required as part of periodic maintenance, and it must be done carefully to avoid damaging the filter. Failure of fuel injectors or turbochargers resulting in contamination of the filter with raw diesel or engine oil can also necessitate cleaning. The regeneration process occurs at road speeds higher than can generally be attained on city streets; Vehicles driven exclusively at low speeds in urban traffic can require periodic trips at higher speeds to clean out the DPF. If the driver ignores the warning light and waits too long to operate the vehicle above 40 miles per hour (64 km/h), the DPF may not regenerate properly, and continued operation past that point may spoil the DPF completely so it must be replaced.

Specifications
*Top advanced manufacturer
*Be experienced in vehicle exhaust catalyst
*Fast delivery and strong production capacity
NO. Item Our products
1 Filter material Cordierite
2 Operating temperature limit (0C) 1000
3 Dimension (mm) Ø 150x150,  Ø 286x305, etc
4 Cell pitch (mm) 100 cpsi
5 Cell wall thickness (mm) 0.45-0.52
6 Cell size (mm) 2.02-2.09
7 Mean pore size (um) 8-13
8 Porosity (gas pocket rate) % 50-55
9 Coefficient of thermal expansion 1.6x10-6
10 Softening temperature (0C) 1360
11 Compressive Strength (Mpa) Lengthwise direction 10
Lateral direction 2
12 Water absorption rate: 35%

















NO. Item Our products
1 Filter material Cordierite
2 Operating temperature limit (0C) 1000
3 Dimension (mm) 143.8x152.4 etc
4 Cell pitch (mm) 200 cpsi
5 Cell wall thickness (mm) 0.32-0.35
6 Cell size (mm) 1.45-1.48
7 Mean pore size (um) 8-13
8 Porosity (gas pocket rate) % 50-55
9 Coefficient of thermal expansion 1.5x10-6
10 Softening temperature (0C) 1360
11 Compressive Strength (Mpa) Lengthwise direction >10.0
Lateral direction >2.0
12 Water absorption rate: 38%

















Size(Diameter  ×  length) Cell density Shape
mm Inches
Φ 118.4 × 101.6 Dia.4.66 × 4 100/200CPSI Rotundity
Φ 118.4 × 152.4 Dia.4.66 × 6 100/200CPSI Rotundity
Φ 127 × 152.4 Dia.5 × 6 100/200CPSI Rotundity
Φ 144 × 101.6 Dia.5.66 × 4 100/200CPSI Rotundity
Φ 144 × 150 Dia.5.66 × 5.9 100/200CPSI Rotundity
Φ 144 × 152.4 Dia.5.66 × 6 100/200CPSI Rotundity
Φ 144 × 254 Dia.5.66 × 10 100/200CPSI Rotundity
Φ 150 × 150 Dia.5.9 × 5.9 100/200CPSI Rotundity
Φ 190 × 200 Dia.7.48 × 7.87 100/200CPSI Rotundity
Φ 190 × 203 Dia.7.48 × 8 100/200CPSI Rotundity
Φ 228 × 305 Dia.8.97 × 12 100/200CPSI Rotundity
Φ 240 × 100 Dia.9.45 × 3.94 100/200CPSI Rotundity
Φ 240 × 240 Dia.9.45 × 9.45 100/200CPSI Rotundity
Φ 240 × 305 Dia.9.45 × 12 100/200CPSI Rotundity
Φ 260 × 305 Dia.10.23 × 12 100/200CPSI Rotundity
Φ 267 × 305 Dia.10.50 × 12 100/200CPSI Rotundity
Φ 286 × 267 Dia.11.26 × 10.50 100/200CPSI Rotundity
Φ 286 × 305 Dia.11.26 × 12 100/200CPSI Rotundity
Φ 286 × 355 Dia.11.26 × 13.97 100/200CPSI Rotundity
Φ 286 × 381 Dia.11.26 × 15 100/200CPSI Rotundity
203.3 × 97 × 152.4 8 × 3.82 × 6 100 CPSI Race track
203.3 × 97 × 254 8 × 3.82 × 10 100 CPSI Race track
188 × 103 × 145 7.4 × 4.05 × 5.7 100 CPSI Race track
191 × 95 × 152.4 7.52 × 3.74 × 6 100 CPSI Race track
374 × 270 × 317 14.72 × 10.62 × 12.48 100 CPSI Assemble track