Products

Thermostat, Bimetal Thermostat, Temperature and Humidity Controller

China Thermostat, Bimetal Thermostat, Temperature and Humidity Controller, Find details about China Thermostat, Auto Thermostat from Thermostat, Bimetal Thermostat, Temperature and Humidity Controller

Model NO.
NTL10B-F
Max. Inrush Current
AC 16A for 10 Sec.
Casing
Plastic According to UL94 V-0, Light Grey
Dimensions
60 X 33 X 43mm
Weight
Approx. 40g
Protection Type
IP20
Trademark
Natural, OEM
Transport Package
Carton
Specification
60*33*43MM
Origin
Zhejiang, China
Model NO.
NTL10B-F
Max. Inrush Current
AC 16A for 10 Sec.
Casing
Plastic According to UL94 V-0, Light Grey
Dimensions
60 X 33 X 43mm
Weight
Approx. 40g
Protection Type
IP20
Trademark
Natural, OEM
Transport Package
Carton
Specification
60*33*43MM
Origin
Zhejiang, China
• Large setting range
• Small size
• Simple to mount
• High switching performance
 
NTL 10A-F / NTL 10A-M: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens
when temperature is rising.
NTL 10B-F / NTL 10B-M: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers
or for switching signal devises when temperature limit has been exceeded. The contact closes when temperature is
rising
 

NTL 10A-F / NTL 10B-F

Switch temperature difference

+/-5°C

Sensor element

thermostatic bimetal

Contact type

snap-action contact

Service life

>100,000 cycles

Max. switching capacity

250VAC, 10 (2) A / 120VAC, 15 (2) A

DC 30W at 24VDC to 72VDC

Max. inrush current

AC 16A for 10 sec.

Connection

2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14)stranded wire¹ 1.5mm² (AWG 16)

Mounting

clip for 35mm DIN rail, EN 60715

Casing

plastic according to UL94 V-0, light grey

Dimensions

60 x 33 x 43mm

Weight

approx. 40g

Fitting position

variable

Operating/Storage temperature

-45 to +80°C (-49 to +176°F)

Operating/Storage humidity

max. 90% RH (non-condensing)

Protection type

IP20

 

    ¹ When connecting with wires, wire end ferrules must be used.
    Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
    resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
 Thermostat, Bimetal Thermostat, Temperature and Humidity ControllerThermostat, Bimetal Thermostat, Temperature and Humidity Controller
Thermostat, Bimetal Thermostat, Temperature and Humidity Controller
Thermostat, Bimetal Thermostat, Temperature and Humidity Controller
Thermostat, Bimetal Thermostat, Temperature and Humidity Controller
Thermostat, Bimetal Thermostat, Temperature and Humidity Controller
 

You Might Also Like