16ton punch machine with 5 cavities for 20mm flip off seal 


Technical specifications:

16 ton punch machine configuration:
1)Automatic discharge;
2)Automatic stamping;
3)Automatic pulling material;
4)Automatic screen out aluminum ring;
5)Automatic blow off the cap;
6)Automatic oil the aluminum strip;
7)Automatic collecting waste materials;
8)The aluminum strip is sent to the opreator automatically,so can inspect quality at any time;
9)The mold is equipped with advanced protection system,if any stuck of the aluminum cap,it can stop immediately.

Following are types of aluminum seal made by the punch machine

1, Punching machine (16 tons) with mould (3 cavities) & accessories, for 32mm aluminum cap
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V); 
b. Mould with 3 cavities for 32mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
1.2 Capacity: 24000-27000 caps per hour (frequency: 135-150 times/min)
1.3 Aluminium coil width: 151mm
1.4 Spare parts: 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.

2, Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V); 
b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
1.2 Capacity: 40000-44000 caps per hour (frequency: 135-150 times/min)
1.3 Aluminium coil width: 151mm
1.4 Spare parts: 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.


3, Punching machine (16 tons) with mould (7 cavities) & accessories, for 13mm or 15mm aluminum cap
3.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 7 cavities for 13mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
3.2 Capacity: 55000-60000 caps per hour (frequency: 135-150 times/min)
3.3 Aluminium coil width: 159mm
3.4 Spare parts: 50% parts of the 7 cavities.
3.5 Tools: Standard tools for repair and maintenance of the machine & mould