SHEET THICKNESS MEASURING EDVICE
Automatic Sheet MeasuringThed-sheet thickness measuring system is integrated in the backgauge finger.
The D-STM measures the sheet thickness to an accuracy of  /-0,01mm, applicable up to 20mm of material thickness. The measuring cycle takes only tenths of a second, the measured data will be send in real time to the CNC and the bending program will be adjusted.

 D-ALPHA
D-Alpha angle measurement system a fully automatic, laser-assisted bend angle measurement system. Irrespective of the properties such as spring back or lamination direction from the material as well as tolerances from the thickness of the material, the
D-Alpha enables an exact determination of the bend angle with an accuracy of better than 0,1
The position of the sensors along the bending line need to be adjusted manually.

X-R-Z1-Z2 four axes back gauge system
X-R-Z1-Z2 five axes back gauge system
X-R-Z1-Z2 six axes back gauge system

P1-P2 SERVO TOOLING
VOPENING CHANGING SYSTEM
Easy to complete small angle bending- 180bending-bending composite flat double thickness complex processes
Accurate positioning of any position within the stroke range, reduce the tooling replacement, so that the maximum efficiency of the tooling

BENDING AIDS SYSTEM
Bending aids system
Provide the auxiliary safeguard for your processing efficiency and the bending accuracy


15"touch screen panel (resolution WSVGA 1366x768)  Standard 4 axis, Up to 6 axis control.  FPGA integrated logics, surface mounting, fiber optic.
Cpu Via Nano X2 E 1, 2 Ghz with 2Gb of RAM  Silicon hard disk (flash disk) for more than 30.000 part  programs. Interactive 2d graphic editor for work-pieces and tools data entry 2D graphic display of machine frame, work-piece and tools. 2 serial ports rs-232, 2 USB port for memory stick, 1 ethernet port, 2 can open port, Fiber optic interface. Local area network.


 154: 3 high-resolution touch screen (resolution XGA1024x768)  Standard 4 axis, Up to 32axis control. CPU PC: AMD Embedded GX 420CA 2GHZ, with 4Gb of RAM. CPU CNC: AMD LX-LX800 500MHz with 128Mb of RAM. FPGA integrated logics, surface mounting, fiber optic. 24Vdc 100W max power supply 2."Hard disk drive 20GB or more The powerful built-in Pc allows having on the machine a real 3D cad cam(Metallix, Radan, ESA).

 15"high resolution colour TFT  Bend sequence calculation, Crowning control  Advanced Y-axis control algorithms for closed-loop as well as open-loop valves. USB, peripheral interfacing, USB flash memory drive, Data backup/ restore via USB The DA-58T offers 2D touch screen programming including automatic bend sequence calculation and  collision detection.

Colour LCD display, 17"TFT, high brightness, 1280 x 1024 pixels, 16 bit colourFull touch screen control (IR-touch) Bend sequence calculation, Crowning control.Product and tools memory 256MB, 3D graphics accelera-ton. Standard Windowsnetworking. Emergency switch, USB flash memory drive.The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool  stations giving true feedback on the product feasibility and handling.