Sludge Pump with Submersible Affluent Pump

China Sludge Pump with Submersible Affluent Pump, Find details about China Slurry Pump, Dredge Pump from Sludge Pump with Submersible Affluent Pump

Model NO.
AS
Type
Vertical
Product Name
3 Phase Sewage Pump
Motor
DC Motor
Trademark
liansheng or OEM
Transport Package
Wood Box
Specification
CE
Origin
Shanghai, China
HS Code
8413709990
Model NO.
AS
Type
Vertical
Product Name
3 Phase Sewage Pump
Motor
DC Motor
Trademark
liansheng or OEM
Transport Package
Wood Box
Specification
CE
Origin
Shanghai, China
HS Code
8413709990

Sludge Pump with Submersible Affluent Pump
Products Name:Sludge pump with submersible affluent pump

Product overview:

AS series submersible sewage pump by ABS company of Germany advanced technology, especially for transport with hard solids, fibers of the liquid, and particularly dirty, sticky and slippery liquid. All AS pumps are fitted with splitting mechanism to fiber sewage, bags, belts, grass, cloth strips torn discharge. Therefore, blockage in the sewage will not work for reliable operation.

The scope of products:

1. Serious water pollution all factories, commercial emissions
2. The hospital sewage discharge, the hotel
3. Sewage treatment plant discharge system of the city
4. Municipal engineering, construction sites
5. The sewerage system in the residential area
6. Mine exploration, complete with machine
7. Air drainage station
8. Biogas digesters in rural areas, farmland irrigation
Product features
1. Adopts advanced technology, sewage capability, no blocking, and can effectively through the solid particle diameter φ 30- φ 80 mm.
2. The tearing mechanism can rip off, fiber material, and then discharged smoothly, without having to add the filter pump.
3. The reasonable design, matching motor power, energy-saving effect is remarkable.
4. Use the new material of mechanical seal, the pump can be safe in continuous operation for more than 8000 hours.
5. The structure is compact, easy to move, easy to install, which can reduce the project cost, without the construction of pumping stations.
6. Can be used within the scope of the whole head, while the motor is not overloaded.
7. Float day and according to the required water level changes, automatic control of pump start and stop, do not need special care.
8. The dual rail automatically install the system, it is to install, repair has brought great convenience, but this may not import and sewage pit.
9. The control box is equipped with automatic protection products, Water Leakage leakage and overload for the effective protection, improved product safety and reliability.
fault phenomenonfailure causeelimination methods
 1.No power supply or one or two phase power supply is needed
Check all phases of power supply and restore power supply

 
 2.Poor contact of ac contactor and burning of coil
Repair or replace contactors

 
can not start3.
The power switch is not closed, malfunction or damaged

 
Close the switch and replace it if the power indicator does not turn on
 4.
Thermal relay trip or damage

 
Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
 Water level is too low
Put water in the sink

 
 The motor burned
Repair or replace the motor

 
 1.Line is loose
Check wiring and tighten connectors

 
 2.Frequency converter malfunctionCheck the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal3The frequency converter is damagedRepair or replace
Automatic transmission failure4.Pressure switch damageRepair or replace
 5The pressure transmitter is damagedRepair or replace
 6.Switch failureRepair or replace
Pump non - suction pressure gauge pointer to beat violentlyInsufficient water supply for perfusion, air leakage at the connection between pipeline and instrumentCheck pipeline and bottom valve, refill water diversion. Tighten air leakage

The pump consumes too much power

 

Too much flow, impeller wear

 
Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow
Sludge Pump with Submersible Affluent Pump
Sludge Pump with Submersible Affluent Pump