China Cooling Tower PVC Fills for Round Type Cooling Tower Infill, 230/250/300/350mm Width, Find details about China PVC Cooling Tower Fill, PVC Drift Eliminator from Cooling Tower PVC Fills for Round Type Cooling Tower Infill, 230/250/300/350mm Width
Module Length (Max) | mm | by roll |
Module Height | mm | 230 / 250 / 300 / 350 |
Flute Height | mm | 18 / 25 |
Flute Corrugation Angle | degrees | - |
Sheet Thickness - Before Forming | mm | 0.3 |
Sheet Thickness - After Forming | mm | 0.3 |
Max. application temp. (short time) - PVC | °C | 60 |
Max.operating temp. (short time) - PP | °C | 95 |
Customized size and thickness available for special request. Contact Newin for details. |
Property | Test Method | Values | ||
Specific Gravity | ASTM D792-13 Method B | 1.426g/cm3 | ||
Oxygen Index | ASTM D2863-13 | 34.50% | ||
Tear Strength | ASTM D1004-13 | X direction | 111 N | |
Y direction | 121 N | |||
Tensible Test | ASTM D 882-12 | Tensile Strength | X direction | 51.1 MPa |
Y direction | 45.3 Mpa | |||
Elongation at Break | X direction | 87% | ||
Y direction | 56% | |||
Values shown above based on SGS Test No.: GZIN1708039662PS by Newin | ||||
Statements and methods presented are based upon the best available information and practices known to Newin. Conditions of use may vary and are beyond control, the user should undertake sufficient tests to determine the suitability for any intended use of the material. |