Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

China Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits, Find details about China Autoclave Tanks, Expansion Vessel from Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Model NO.
TY-08-24L-10E-007
Power
Electric
Start Up
Electric Pump
Type
Jet Pump
Application
Submersible Pump
Industry
Food Pumps
Media
Booster Pump
Performance
Sanitary Pumps
Theory
Jet Pump
Manufacturer
Taizhou Tianyang Electrical Co., Ltd
Test Pressure
15 Bar
Vessel Capacity
24 Liter
Max. Working Pressure
10 Bar
Max. Operating Temperature
99°c
Factory Pre-Charge
2 Bar
Connections
3/4" Bsp
Shell
Carbon Steel
Counter Flange
ANSI Stainless Steel SUS 304
Membrane
EPDM/Butyl Rubber
Colour
Blue/Red/White/Gray
Tank Diameter
270 mm
Tank Height
290 mm
Tank Length
485 mm
Medium
Water, Glycol Solution
Trademark
Aqualeader/Dezhi
Transport Package
295X295X490 mm
Specification
10/16/20/25/35 BAR Wroking Pressure
Origin
Taizhou, China
HS Code
9032900090
Model NO.
TY-08-24L-10E-007
Power
Electric
Start Up
Electric Pump
Type
Jet Pump
Application
Submersible Pump
Industry
Food Pumps
Media
Booster Pump
Performance
Sanitary Pumps
Theory
Jet Pump
Manufacturer
Taizhou Tianyang Electrical Co., Ltd
Test Pressure
15 Bar
Vessel Capacity
24 Liter
Max. Working Pressure
10 Bar
Max. Operating Temperature
99°c
Factory Pre-Charge
2 Bar
Connections
3/4" Bsp
Shell
Carbon Steel
Counter Flange
ANSI Stainless Steel SUS 304
Membrane
EPDM/Butyl Rubber
Colour
Blue/Red/White/Gray
Tank Diameter
270 mm
Tank Height
290 mm
Tank Length
485 mm
Medium
Water, Glycol Solution
Trademark
Aqualeader/Dezhi
Transport Package
295X295X490 mm
Specification
10/16/20/25/35 BAR Wroking Pressure
Origin
Taizhou, China
HS Code
9032900090
Introduction

Dezhi expansion vessels are suitable for use in central heating and cooling installations.

Nitrogen, a dry inert gas used in the Dezhi/Aqua Leader range of expansion vessels, improves the vessel's life span by reducing corrosion inside the vessel, and prevents loss of pre-charge pressure. Nitrogen permeates through rubber slower that oxygen and is far less reactive to both steel and aluminium creating fewer debris inside the vessel. Nitrogen does not degrade rubber prolonging the membrane life.

Oxygen in compressed air permeates through the membrane, thus reducing the pre-charge pressure over time. During normal operation, oxygen oxides the membrance in the vessel, causing under inflation pressure and will not corrode the inside of the vessel.

It's recognised in the industry that oxidative ageing is one of the primary causes of decreased vessel life. Tests have shown that if vessels are inflated with Nitrogen, there is a significant reduction in failure and increased vessel life.

For use under high pressure. Top-quality high strength steel, with a gleaming red (RAL 3002) epoxy powder coating - perfect protection and finish. Clamp ring of heavy-duty thermally-galvanised steel. Our flexible EPDM Bladder with rolling action are suitable for use with glycol based anti-freeze addition up to 50%. Exact details are available on request. The nitrogen airvalve is sunk and cannot be damaged due to the cap and extra protective plastic beige coverplate. Uncoated threaded system connection, ensuring problem free connecting.

Specifications

  • Max. working pressure: 10 bar(g)
  • Max. temperature at (heating) outlet: 99 °C.
  • Max. temperature diaphragm: 99 °C (DIN4807/3).
  • Max. supply temperature (boiler): 90 °C.
  • Min. working temperature: -10 °C
  • In accordance with Pressure Equipment Directive 97/23/EG.

The main elements of the membrane tank are a metal case of high-quality deep-drawn steel and an elastic membrane made of Butyl Rubber Membrane separating the tank into two chambers - an air (cavity between the metal case and a membrane) and a water one (the internal cavity of the membrane). The air chamber is constantly under a pre-set air pressure. The service life of diaphragm tanks is at least 10 years of continuous operation. The durability of the membrane - at least 100,000 cycles. Dupont (France) materials are used as paint. 

Features of the design - the location of the top flange (TOP tanks) provide ease of installation / disassembly of the equipment, virtually eliminates the possibility of air plugs in the water cavity of the membrane, the minimum time required to replace the membrane; small overall dimensions.

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits


Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits
Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Technical Parameter 

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits



How a Expansion Tank Works


Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits
Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits



Company profile 

Taizhou Tianyang Electrical co., LTD. Is located in Shangma industrial Zone, Shitang Town, WenlingCity, Zhejiang rovince, covering an area of 15, 000 square meters. Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company. We have produced pressure tank for more than 20 years. Available volumes range from 0.15 to 1500 liters. and working pressure from 4 bar to 25bar. Our products are applied to pump systems. Our products are exported to numerous overseas clients. We can custom design and manufacture products according to client-supplied requirements. 
We adhere to the business philosphy"Credibility, Quality and service", our scientific management is based on the domestic market, but facing to the world. Warmly welcome customers both domestic and from abroad. We sincerely hope to cooperate and develop together to create a better future. 
Taizhou Tianyang Electrical Co., Ltd. Is always your most loyal partner.  

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

I would like to take this opportunity to introduce our company to you. I am contacting you on behalf of Taizhou Tianyang Electrical Co., LTD.

We are the factory from China for making Pressure Tanks for Fire Protection, Residential Water and Irrigation, Sport Turf and Landscape Irrigation, Agriculture and Horticulture Irrigation, Water Filtration, Treatment & Recycle, Solar and Stock Water System, Rain Water Harvesting, Pump Systems. Based on ISO quality management system, we have obtained CE, KC, ISO 9001, ISO14001, OHSAS 18001, SGS, Water Mark, and Wras Certificates for our company & our Pressure Tanks. Welcome to visit Taizhou Tianyang Electrical Co., LTD when it is more convenient for you. 

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Basic Introduction 

The pressure vessel is designed to provide a storage facility and pressure reservoir for water at temperatures up to 99ºC. Common uses are in water booster sets, heating pressurisation and fill sets. The vessel incorporates a replaceable Butyl diaphragm mounted in a mild steel shell. This method of construction eliminates any contact between the stored water and the steel shell of the vessel, and is therefore suitable for use with potable water. All units up to and including 25 litre sizes are suitable for a working pressure of 8 bar, larger vessels 10 bar, (except 1000LV)

For Water-Dezhi Series 

Interchangeable membrane pressure tanks.

Membranes suitable for drinking water and can be installed to any type of pump.

WRas approved and built to 97/23/EC


Technical Parameter  
ModelTank VolumeMaxi Working PressureDiameterHeightConnectorPackage
(Paper Box)
Export
Packing Size
xLiterBarmmmmInchcmNon-fumigation wooden case/Or Pallet 
TY-04-5L510160300117x17x31
TY-04-8L810200340120x20x34
TY-04-12L1210270350127x27x35
TY-04-19L1910270410127x27x41
TY-04-24L2410270460127x27x46 
TY-06-36L3610350560135x35x56
TY-06-50L5010350830135x35x83
TY-06-60L6010450750145x45x75
TY-06-80L8010450890145x45x89
TY-06-100L10010450940145x45x94
TY-06-150L150104501100145x45x110
TY-07-180L180105601000156x56x100
TY-07-200L20010650970165x65x97
TY-07-300L300107201260172x72x126
TY-07-500L500107501500175x75x150
TY-07-750L750107501800175x75x180
TY-07-1000L100010100018001100x100x180
TY-07-1500L150010110020001110x110x200
TY-07-2000LPlease refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)
TY-08-8L810240330125x25x34
TY-08-12L1210270340129.5x29.5x35
TY-08-19L1910410290129.5x29.5x41
TY-08-24L2410460290129.5x29.5x46
TY-08-36L3610380490138x38x50
TY-08-50L5010380560138x38x57
TY-08-60L6010480490148x48x50
TY-08-80L8010480630148x48x64
TY-08-100L10010480720148x48x73
TY-08-150LPlease refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)
TY-08-200L
TY-08-250L
TY-08-300L
TY-08-400L
TY-08-500L
TY-08-600L
TY-08-750L
TY-08-1000L
TY-08-1500L
Regarding Installtion 

The vessel is supplied pre-charged with air, but this pressure may require adjustment to suit the site conditions. This adjustment must be made with the vessel isolated from the system, and before filling with water. Air may be vented from, or pumped into, a patent valve which will be found under a black plastic screw-off cover on the shell (sizes up to and including 500 litre) or on a side mounted flange (750 and larger). It will be noted that vessels of 60 litre capacity or larger are manufactured with connections at either end of the vessel shell. The vessel should be mounted so that the system connection is made at the lowest possible point, to facilitate on-site maintenance. The other connection may be fitted either with a air bleed valve, or alternatively with a blanking plug. All pressure vessels should be installed with an isolating valve and drain cock.

Periodic Maintenance

The only maintenance required on this equipment is a periodic check on the air cushion pressure. It is necessary to isolate the vessel from the system, and to drain all water from the tank before making this measurement with a standard tyre pressure gauge from the  valve.

Maintaince free models are also available,Please refer to customized Model Or Contact Mr.Tom Lee (Export Models Only)




FAQ Details:  

1. Q: What is your MOQ of this item?
  A: We are a factory, have stock. 1PCS is ok!

  2. Q: What is the delivery time?
  A: 7-25 days after receiving orginal L/C or deposit by TT.

  3. Q: Is it all right to make customer's own brand name?
  A: Yes we supply OEM service. Please send us a authorization doc.

  4. Q: Where is your Loading Port?
  A: Ningbo, Zhejiang, China.

  5. Q: What are your payment terms? For Bulk Quantity Purchase
 A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
  For Samll amount Trial Order, Please arrange the full payment

  6. Q: What is your company's available production capacity?
  A: 50000~60000 pieces of Pressure Tank per month. 

Welcome To Visit Us 

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Please do not hesitate to contact me if you have any questions.  

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits

Yours Sincerely 

Tom Lee

-----------------------------------------------------------
Tom Lee 
Business Development Manager
Taizhou Tianyang Electrical Co., LTD
Ph: +86-21-57813120
 
Fax: +86-576-86818392
www. cndezhi. com  
Autoclave Tanks with Interchangeable Membrane for Sanitary Water Circuits