This system is a KN95 semi-automatic mask machine system, which integrates unwinding, printing, edge banding, filming and receiving.
With the help of Kewei's intelligent servo and PLC, a three-axis tracking shear system platform has been built, and the functions of tracking shearing watchmaking, electronic cams, and electronic gears built into the intelligent servo are adopted.
System ConfigurationSerial number | Name | Product | Models Specifications | Quantity |
1 | Display screen | Kewei touch screen | HK-B070-32BX | 1 |
2 | Host | Kewei PLC | LP2-24M16R | 1 |
3 | Printing shaft | Kewei Smart Servo driver | MPS-I-1521-PT | 1 |
MiG Servo Motor | 130ST-M06025 | 1 |
4 | Sealing shaft | Kewei Smart Servo | MPS-I-0721-PT | 1 |
MiG Servo Motor | 80ST-M02430 | 1 |
5 | Cutting shaft | Kewei Smart Servo | MPS-I-0721-PT | 1 |
MiG Servo Motor | 80ST-M02430 | 1 |
6 | Rear Traction Shaft | Kewei Smart Servo | MPS-I-1521-PT | 1 |
MiG Servo Motor | 130ST-M06025 | 1 |
7 | Accessories1 | Motor wiring | 3m | 4 |
8 | Accessories2 | DB25 adapter board | 1.5m | 4 |
9 | Accessories3 | PLC communication line | 3m | 1 |
System architecture Introduction of MPS Series Intelligent Servo(1) MPS-I series intelligent servo
MPS-I series AC intelligent servo drive adopts high-performance digital signal processor DSP and intelligent power module IPM and other components, and has the following advantages:
1 High integration, stable performance, PLC data and drive data are in one chip, so PLC data and drive data can be shared without delay, and the operating data and status of the drive and motor can be observed online at any time during system operation.
2 Complete hardware protection and software alarms can easily judge faults and avoid danger.
3 Integrated PLC function, integrated design makes the operation more convenient, the system control is more concise, saves the system cost, comes with 7 input and 7 output IO points, 1 high-count count, and can output 3 pulse signals at the same time, built-in various common Movement instructions, such as tabulation, cam, etc.
4 High ease of use, the servo working mode can be switched at any time through the ladder diagram inside the servo, and it can be run by setting in the number, and there is no need to worry about pulse interference.
5 Special encryption function, it is impossible to decrypt after encryption, which more securely protects the intellectual property rights of manufacturers.