Products

Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor

China Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor, Find details about China Slip Ring Motor, High Voltage Motor from Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor

Model NO.
YRKK
Number of Poles
4
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv.3.3kv.6kv.6.6kv.10kv.11kv
Nsulation Class
F
Output Power
1600kw
Cooling Method
IC611/IC616
Protection
IP44 or IP54,IP55
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Model NO.
YRKK
Number of Poles
4
Starting Mode
Serial Rotor Resistance Starting
Certification
ISO9001, CCC
Brand
China Motor
Voltage
3kv.3.3kv.6kv.6.6kv.10kv.11kv
Nsulation Class
F
Output Power
1600kw
Cooling Method
IC611/IC616
Protection
IP44 or IP54,IP55
Duty
S1
Frequency
50Hz/60Hz
Stator Winding
100% Red Copper
Rotor Winding
100% Red Copper
Driving
Steel Rolling Mill, Cement Mill,Sugar Rolling Mill
Trademark
ZCL
Transport Package
Plywood Case
Origin
Shijiazhuang, China
HS Code
8501530090
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
The power rating, installation dimensions and electrical performance of the high-voltage wound rotor slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The bearings of the high-voltage wound rotor slip ring motor have two types of rolling bearings and sliding bearings, depending on the power and speed of the motor. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
The high-voltage winding slip ring motor increases the setting and the bearing temperature measuring device. It can also add a heating device inside the motor. The shaft extension of the motor generally uses a tangential key, and the motor carbon brush is not a lifting structure.
High-voltage wound rotor slip ring motors can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in the mining, machinery industry, petrochemical industry, power plants, etc. Used as a prime mover in a mining and mining enterprise. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
The high-voltage wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
Main process flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction MotorYrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
The motor products manufactured and sold by our company are used in many industries, such as electric power, mining, steel metallurgy, petrochemical, water conservancy, transportation, building materials and many other industries. The equipment for the motor is pump, machine tool, fan, mill, crusher, rolling mill, compressor and many other industrial equipment.
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
Yrkk High Voltage Slip Ring Ball Re-Rolling Mill Large Size Asynchronous AC Electric Three Phase Induction Motor
The company insists on providing high-quality motor products and services to users, and has won high praise from many domestic and foreign customers. The company will receive many foreign merchants to visit our factory every year, and establish a good cooperative relationship through on-site inspection of our factory. Our company always welcomes customers to visit our factory.


 

You Might Also Like